Eylar Protective Gear and Camera Hard Case Water & Shock Proof With Foam (Green)
Quick take
This foam-lined hard case is designed to protect compact cameras and related accessories during travel, with a gasket-style seal and shock-focused padding. It is a strong value pick for buyers who want reconfigurable foam, lockable fittings, and durable hard-shell protection, with the main caveat that the pressure equalization valve is manually controlled (you must keep it fully closed for best water resistance).
Pros and cons
Pros
- Reconfigurable RAGAR foam system with customizable pull and pluck cubes plus bottom and top padding layers.
- Gasket seal and a water and shock-resistant design aimed at protective storage and travel.
- Lockable fittings (padlock-ready) plus TSA-style compatibility for controlled access.
- Size fits a typical compact camera plus one lens and essentials, with room for batteries, charger, and small accessories.
Cons
- The pressure equalization valve is a knurled screw, so it only supports water resistance when fully closed.
- Interior dimensions suggest it is best for compact setups, not large professional camera-and-lens combinations.
What buyers think
Buyer feedback is generally consistent around build quality, seal feel, and value. Many users describe the latches and hinges as solid and easy to operate, and they highlight that the foam setup helps them configure a custom fit for a camera and essentials. Several buyers compare it favorably to higher-priced hard cases in the same “protection first” category, while still using it as a practical travel case rather than something they treat as a submersion tool. Overall, the clearest recurring limitation in reviews is about the manually controlled pressure valve and its impact on water-resistance expectations.
Buyer-review evidence is limited for fine-grained claims like long-term durability or real-world water testing, because most comments focus on setup and everyday protection rather than repeat exposure scenarios.
What this case is for
This is a medium hard camera case built for organized protection of compact mirrorless and DSLR kits, plus small accessories. The design centers on: a hard polypropylene shell, a gasket-style seal, and a foam interior meant to cushion against impacts while keeping gear in place during movement.
Key features that matter for buying
Foam protection and customization (RAGAR system)
The interior uses a multi-layer approach: customizable pull-and-pluck foam cubes, plus dedicated bottom and top layers. That lets you shape the cavity for your camera body and a specific lens, then fill remaining space to reduce shifting.
Water and shock-resistant design
It is marketed as water proof and shock proof, with a gasket seal and a pressure equalization valve intended to manage pressure changes. In practical terms, reviewers note the valve is not automatic, so you need to ensure it is fully closed when water resistance is part of your plan.
Lockable fittings and TSA-style compatibility
The case includes lockable fittings and is described as meeting TSA requirements, which is useful if you travel and want an extra layer of security without sacrificing controlled access.
Size and capacity: where it fits best
With external dimensions of 13.37 in x 11.62 in x 6 in, and an inner footprint meant for camera gear organization, this case is best for compact kits. Expect it to work well for setups that resemble “camera body plus one lens, batteries, charger, and small accessories,” while being less ideal for larger multi-lens configurations or big grips that require more interior volume.
Pros and cons in plain English
- Buy it if you want a customizable, hard-shell camera case for travel. The reconfigurable foam system is geared toward keeping gear from rattling.
- Buy it if lockable, seal-forward protection matters to you. The case is built around latch security, a gasket seal, and lock-ready fittings.
- Skip or rethink it if you need “set-and-forget” water performance. Because the pressure valve is manually controlled, water-resistance expectations should be tied to how carefully you close it.
- Skip or rethink it if your kit is large. The interior is aligned with compact camera setups, not heavy pro builds with multiple large lenses.
Who should buy this camera hard case
- Photographers and content creators traveling with a compact mirrorless or DSLR kit and a limited number of accessories.
- Buyers who want to reconfigure foam to match their exact camera and lens shape.
- People looking for a lockable, gasket-sealed hard case option that emphasizes protection over backpack convenience.
Who should avoid it
- Anyone who needs fully automatic pressure equalization for underwater or high-risk water scenarios.
- Buyers with larger camera-and-lens combinations that do not fit the provided interior dimensions.
- Shoppers who prefer a soft case or do not want to spend time configuring foam.
Comparison notes (how it stacks up)
Hard cases like this usually trade off flexibility and size. Compared with premium “brand name” cases in the same category, the Eylar is positioned as a value-forward alternative with a similar protection approach (hard shell, foam, seal, and lockable hardware). The decision usually comes down to whether you are comfortable spending a few minutes setting foam and following the valve guidance for water resistance, versus paying more for a more hands-off feature set.
If you want, tell me your camera model, lens size, and whether you carry batteries/charger/flash, and I can help you sanity-check whether this case’s dimensions are likely to work for your kit.
Price and availability
This case is listed as available in the United States, with a current price shown by the retailer link below.
Verdict
The Eylar Protective Gear and Camera Hard Case is a solid pick for compact camera travel and protected storage, especially if you value reconfigurable foam and a gasket-sealed, lockable hard-shell design. The biggest buyer caveat is the manually controlled pressure equalization valve, so if your plan depends on water resistance, make sure you close it fully before heading out.
FAQ
Is this case suitable for a compact mirrorless or DSLR with one lens?
It is intended to fit standard compact camera kits with room for essentials like batteries, a charger, and small accessories, with foam customization to support the specific camera and lens shape.
Does the case have a pressure equalization valve for water resistance?
Yes. The pressure equalization valve is controlled by a screw, so water resistance depends on keeping the valve fully closed when you want the seal to function as designed.
Can I lock this case?
Yes. It includes lockable fittings that support padlocks, which adds security for travel.
How easy is it to set up the foam interior?
The foam uses a reconfigurable system with pull-and-pluck cubes plus top and bottom padding layers, so you can shape the interior around your camera and accessories. Expect it to take some time the first time you set it up.
Is it meant for submersion?
It is designed to be water and shock resistant, but real-world submersion reliability is not something reviewers focus on in a repeatable way. If submersion is a core requirement, confirm your expectations against the valve behavior and your specific water scenario.
What size gear should I avoid putting in it?
If your camera-and-lens setup is larger than what the case interior is designed for, you may struggle with fit and foam placement. It is best aligned with compact kits rather than large multi-lens pro builds.
Specifications
| Product Title | Eylar Protective Gear and Camera Hard Case Water & Shock Proof With Foam 13.37 inch 11.62 inch 6 inch OD Green (Green) |
|---|---|
| Category | Electronics > Camera & Photo > Bags & Cases > Camera Cases |
| Manufacturer | Eylar |
| Model Number | SA00001-Green-Cam |
| Color | Green |
| Size | Medium |
| Item Weight | 4 Pounds |
| Closure Type | Snap |
| Capacity | 3000 Pounds |
| Strap Type | Web Handle |
| Handle Type | Web Handle |
| Number of Compartments | 2 |
| Style Name | Hard Camera Case |
| Pattern | Solid |
| Item Dimensions L x W x H | 13.37"L x 11.62"W x 6"H |
| Brand Name | Eylar |
| Manufacturer Warranty Description | Limited Lifetime Warranty |
| UPC | 819889029015 |
| Manufacturer Part Number | SA00001-tanc |
| Unit Count | 1 Count |
| Item Type Name | hard-camera-case |
| Material Type | Polypropylene (PP) |
Available variants
Color
- Green
Recommended next
Neewer 2-in-1 Rolling Camera Bag Backpack Suitcase Style Convertible with Double Handle, Shockproof Trolley Case
A convertible rolling camera bag that switches between backpack and suitcase-style trolley carry. Best for photographers who need hands-free comfort for packed travel days, plus organized interior space for DSLR kits and a 17-inch-class laptop/tablet. Main caveat: it can be too large for some under-seat airline situations, so plan for overhead-bag storage.
eCostConnection Extra Large Soft Padded Water Resistant Camcorder Equipment Gadget Bag/Case
The eCostConnection Extra Large Soft Padded Water Resistant Camcorder Equipment Gadget Bag/Case (Model CC6) is a nylon, zipper-closure camera case designed to protect camcorders, DSLRs, and lens kits during travel. It offers padded interior protection, adjustable dividers for organizing gear, and multiple external pockets, but it is a soft bag, so it is best for everyday carry rather than hard-case-level drop protection.
K&F CONCEPT Camera Sling Bag Crossbody Bag Waterproof Camera Shoulder Backpack DSLR/SLR/Mirrorless Camera Case
A compact crossbody sling for everyday camera carries, designed to hold a camera body plus a couple lenses and small accessories. Buyers highlight the comfortable, quick-access layout, durable feel, and waterproof material, with one common caveat: protection is better for normal travel bumps than for major falls. If you want a lighter alternative to a full camera backpack, this is a strong fit.
USA Gear Camera Sleeve (Medium) for Compact SLRs Compatible with Canon EOS R100 Nikon Z30 Sony ZV-E10, and more
The USA Gear Medium neoprene camera sleeve is a compact, form-fitting way to protect a compact SLR-style camera while staying travel-light. It includes a zip accessory pocket and a belt loop for quick carry during walks, events, and day trips, with the main caveat being size fit for your exact camera body and lens setup.