Eyebloc Laptop Webcam Cover Slide
Quick take
The Eyebloc Laptop Webcam Cover Slide is an ultra-thin magnetic webcam privacy slider designed for MacBook notch displays (compatible with MacBook models from 2014 to 2021, with additional guidance for newer notch models). It focuses on clean looks and secure placement without sticky adhesive, but you may need two hands and a few seconds to open or close it smoothly.
Pros and cons
Pros
- Magnetic attachment helps avoid adhesive residue on your screen
- Very slim profile (about 0.01 inch) for a closed-lid fit
- Steel, powder-coated construction built for daily use
- Sliding design lets you reveal the camera when needed
Cons
- Opening and closing can take two hands (slower than simple flap covers)
- Compatibility depends on the MacBook notch/display setup, including 2021/2022 notch guidance
- It may be a pricier option compared with DIY tape or card covers
What buyers think
Buyer feedback is generally consistent on the practical day-to-day value of this webcam cover. Reviewers commonly describe it as subtle once installed, effective at blocking the camera, and easy to live with because it does not use sticky adhesive. Many also highlight that magnetic mounting keeps it from feeling temporary or likely to fall off, and they like that the laptop can close cleanly with the cover in place. The main recurring tradeoff mentioned is control and speed, specifically that sliding it open or closed can require two hands and takes longer than some simpler cover styles.
Who this webcam cover slide is for
This is a good fit if you want a clean-looking webcam privacy solution for a compatible MacBook notch display, and you prefer magnetic attachment over tape or glue-based covers. It is especially appealing if you use your camera occasionally and want a quick, intentional way to expose or block it using the slider.
Who should skip it
Skip this option if you need a one-handed, ultra-fast cover action, or if you are unsure your exact MacBook model and notch/display configuration matches the compatibility guidance. If you simply want the cheapest possible camera blocking method, DIY solutions like taped paper or tape-based blockers may suit your budget better, even if they are less polished.
Design and build quality
The cover is made from high carbon stainless steel with a powder-coated finish. Reviewers tend to value the solid feel and the fact that it is not glued on, which is a common objection with adhesive-style webcam covers. The profile is extremely thin (about 0.01 inch), which is intended to let your MacBook close without putting pressure on the screen.
Magnetic installation and day-to-day use
The slider attaches via magnets integrated into the display border area, so setup is quick and it is removable without residue. In use, the cover uses a top-mounted opening to align with the camera and related sensor area while the shutter is closed, then slides out of the way when you need to use the webcam.
Compatibility notes for MacBook notch models
This cover is designed for MacBook models with notch displays, with compatibility listed across MacBook models from 2014 to 2021. There is also specific mention of guidance for 2021/2022 MacBook Air and MacBook Pro notch displays, and a note that manual adjustments may be necessary on some models.
Practical takeaway: Before buying, confirm your exact MacBook model year and whether it uses a notch display, since fit and alignment are the difference between a subtle cover and one that does not sit properly.
Pros and cons, summarized
- Best strengths: slim profile, steel build, magnetic mounting (no sticky residue), and a subtle look when installed.
- Main tradeoff: it can be slower and require two hands to slide open or closed smoothly.
- Value question: it is often compared against tape or DIY paper blockers, but buyers tend to justify the cost when they care about clean aesthetics, secure placement, and screen-friendly removal.
Price and availability
Check the current price and availability before purchasing, since pricing can vary by seller and listing. If you are price-sensitive, compare it directly to tape-based blockers, but if you want a more permanent, screen-safe look, this model’s steel and magnetic design is the core value proposition.
Alternatives (how to choose)
If you are comparing camera privacy covers, look at three decision points: (1) attachment method (adhesive versus magnetic or clip-in), (2) fit for your MacBook notch or camera location, and (3) how the cover opens and closes (slider versus flap).
- Tape or DIY paper/card covers: typically cheaper, but can look obvious and may leave residue or require frequent replacement.
- Adhesive webcam covers: often easy to apply, but the key concern is removal and potential residue, especially on frequent cleaning.
- Other notch-specific magnetic designs: may offer similar benefits, but alignment and sensor/cutout placement are what determine how “invisible” they look in real use.
Verdict
The Eyebloc Laptop Webcam Cover Slide is a solid choice for MacBook owners who want a sleek, low-profile webcam privacy solution with magnetic mounting and no sticky adhesive. It trades speed for careful, stable slider placement, and it depends on correct notch/display compatibility, so double-check your model before ordering. If those points match your priorities, it is one of the cleaner ways to block your camera without leaving a mess behind.
FAQs
Is the eyebloc laptop webcam cover slide compatible with all macbooks?
It is designed for MacBook notch displays, with compatibility listed across MacBook models from 2014 to 2021 and specific guidance for 2021/2022 notch models. If your MacBook uses a different camera/noch setup, fit and alignment may require checking compatibility guidance closely.
Does it use adhesive on the screen?
No. It uses a magnetic attachment mechanism, which is a key reason buyers often prefer it over tape or glue-based webcam covers.
How hard is it to open and close?
It uses a sliding action. Some buyers report it can require two hands and a few seconds for smooth operation, which is the main usability tradeoff versus simpler cover styles.
Will the laptop close normally with the cover installed?
The cover is designed with an ultra-thin profile (about 0.01 inch) intended to allow the laptop to close securely while installed.
Is it worth buying compared with tape or a card?
If you only need basic camera blocking, DIY methods can be cheaper. This product is usually valued for cleaner aesthetics, more secure placement, and easier removal without adhesive residue, even though it may cost more.
Specifications
| Product Title | Eyebloc Laptop Webcam Cover Slide - Magnetic Privacy Slider & Webcam Privacy Cover - Ultra-Thin Design & Camera Blockers - Sleek Steel Construction |
|---|---|
| Category | Electronics > Computers & Accessories > Laptop Accessories > Camera Privacy Covers |
| Manufacturer | Eyebloc |
| Item Weight | 0.493 ounces |
| Package Dimensions | 10 x 2.2 x 0.47 inches |
Available variants
Size
- All Macbook Models Prior 2020 (No Notch)
- 1 Piece-Black-Notch Series
Recommended next
![CloudValley Webcam Cover Slide[2-Pack], 0.023 Inch Ultra-Thin Metal Web Camera cover](/product-images/019ed146-f382-7453-a0b1-e3fda202c51d-0-ecf7fa18f2b4.webp)
CloudValley Webcam Cover Slide[2-Pack], 0.023 Inch Ultra-Thin Metal Web Camera cover
The CloudValley slide webcam privacy cover is a minimalist, ultra-thin metal option designed to physically block laptop and mobile front cameras when you want privacy. Buyers like how discreet it is, how securely it sticks, and that it avoids blocking the device’s indicator light. The main tradeoff is careful handling, since the cover can feel delicate during installation and when opening or closing the shutter.
Webcam Cover Slide 6 Packs Ultra-Thin Camera Covers for Computer
A simple, ultra-thin slide-on webcam cover set designed to help block laptop, desktop, tablet, and phone cameras when you are not using them. Reviewers highlight easy installation and smooth sliding, with the main caution being fit, especially on certain MacBook Pro 16-inch models and some full-screen devices.
Webcam Cover, 0.02 inch Panda Laptop Camera Cover, Cute Accessories
A thin, slide-style panda design webcam cover meant to add privacy to many devices. Buyers like the look and generally report it adheres securely when applied carefully, but the small size makes alignment tricky and the adhesive pad offers limited room for error during installation.
ZUCUCUC Laptop Camera Cover Slide, 12 Pack Webcam Cover (Phone + Tablet + Laptop)
The ZUCUCUC camera cover slide is an ultra-thin privacy shutter kit designed to slide open and shut over front webcams on laptops, tablets, and phones. It’s easy to apply and comes with 12 covers in two sizes, but adhesive strength and staying power can vary by device and how the cover is handled.