EWAY for Garmin GPS Mount w/Telescopic Extension Arm, Replacement Dash Ball Mount Holder
Quick take
This EWAY replacement mount is built for Garmin GPS models that use a 17mm ball joint, giving you a windshield or dash mounting option plus a telescopic arm. It is best for drivers who want more control over screen distance and angle, with a pivot and extension range designed for flexible positioning. The biggest buying caveat is compatibility, and the fact that suction-style gel pads may depend on surface type and conditions to stay put.
Pros and cons
Pros
- Compatibility focus on Garmin Nuvi and related lines that use a 17mm ball-join mount.
- Telescopic arm extends roughly 4.6 to 6.6 inches and pivots up to 270 degrees for angle adjustments.
- Includes a strong sticky gel pad designed for windshield, dashboard, countertop, or other smooth flat surfaces.
- Reinforced plastic holder with reusable gel pads you can rinse to restore adhesion.
Cons
- Not compatible with certain Garmin Drive series units listed as exclusions (for example, DriveSmart variants and others named as not compatible).
- Once the gel pad is mounted, it may be difficult to reposition, and removal can leave sticky residue.
- It is not water resistant, so it is meant for indoor or vehicle mounting where it will not be exposed to water.
What buyers think
Buyer-review evidence points to strong “fit and function” for people replacing a lost or broken Garmin mount. Many comments emphasize that the replacement matches the GPS setup well, feels sturdy, and is easy to install. Reviewers also frequently note the adjustment benefits of the telescopic arm, especially for dialing in a comfortable driving position. The main recurring concerns are related to surface dependence for suction-style holding, including cases where dash surfaces (like vinyl) may not hold as consistently, and issues with sticky residue or the difficulty of moving the mount after it is placed.
Who this mount is for
The EWAY telescopic Garmin replacement mount is a practical choice if you already own a compatible Garmin Nuvi (and related models) that uses a 17mm ball joint and you want a replacement for a dash or windshield setup. It is also a good fit for drivers who want to adjust screen distance from the dash, not just angle, thanks to the telescoping arm and broad pivot range.
Compatibility and fit details that matter
This mount is intended for Garmin GPS units that use a 17mm ball joint. It lists compatibility across a range of Garmin Nuvi models and related lines such as Dezl, RV, Drive, DriveSmart, Zumo, DriveAssist, and DriveLuxe, but it also calls out that it is not compatible with several Garmin Drive series models (for example, DriveSmart 86, Dezl 2790/2780 type exclusions, RV 890/1090/1060 exclusions, and several other named models). Before ordering, confirm your Garmin’s mounting style is the 17mm ball joint and double-check it is not on the exclusion list.
Mounting and adjustability, explained
Telescopic extension and pivot range
The arm extends from about 4.6 inches to 6.6 inches, giving you a bit of extra reach for different seating positions. It also pivots up to 270 degrees, which helps you aim the screen more precisely at your line of sight.
Suction gel pad holding expectations
The mount uses a sticky gel pad approach intended for windshield, dashboard, countertop, or most smooth flat surfaces. Reusable gel pads are part of the design, and you can restore adhesion by rinsing with warm water and wiping dry. In real-world use, the key variable is the mounting surface, some dashboards and vinyl finishes may not hold as long as smooth, flat glass or other suitable surfaces.
Pros and cons breakdown
Benefits you’ll likely notice
- Better positioning than fixed mounts: the telescopic extension plus a wide pivot helps you set a comfortable viewing angle.
- Replacement-focused design: it is made to serve as a replacement dash ball mount holder for compatible Garmin units.
- Adhesion maintenance is supported: gel pads can be cleaned and refreshed to help extend usability.
Tradeoffs to consider before you buy
- Compatibility requires attention: it is not universally compatible with all Garmin Drive models, so it is important to verify the ball-joint type and model exclusions.
- Reseating may be messy: some buyers report that once it is placed, it can be hard to move later and may leave sticky residue.
- Hold strength depends on surface and conditions: suction-style pads are sensitive to the dashboard material and can behave differently depending on where you mount it.
Verdict
If you need a replacement Garmin dash or windshield mount for a 17mm ball-joint Nuvi and related models, the EWAY telescopic arm offers a practical mix of adjustment range and a gel-pad mounting system. It is especially appealing when you want to fine-tune distance and viewing angles. Just make sure your specific Garmin model is compatible and be prepared to choose a good mounting surface, since repositioning can be difficult and holding can vary with dashboard materials and conditions.
Price and availability
Check current pricing and shipping options before ordering, since this mount is listed at a lower price point compared with the higher list price shown on the product page.
FAQs
Is this mount compatible with all Garmin GPS models?No. It is designed for Garmin units that use a 17mm ball joint and it also lists specific Garmin Drive-series models that are not compatible. Verify your GPS mounting style and check for exclusions before buying.
How adjustable is the telescopic arm?The arm extends from about 4.6 inches to 6.6 inches and can pivot up to 270 degrees, which helps you adjust both distance and viewing angle while driving.
What surfaces does the gel pad suction mount work best on?It is intended for windshield, dashboard, countertop, or most smooth flat surfaces. Performance can vary on dashboard materials, and removal or repositioning may leave residue.
Will the mount hold up in hot weather?The mount uses gel pads designed for hot and cold conditions, but buyer comments suggest holding can vary by surface type. If you regularly park in extreme heat, choose a surface that provides the best adhesion and keep the pad clean.
Can I reposition the mount after it is stuck down?You may be able to remove it, but some buyers report that the adhesive can leave sticky residue and that repositioning is not always clean or effortless. Plan to place it carefully the first time.
Specifications
| Product Title | EWAY for Garmin GPS Mount w/Telescopic Extension Arm, Replacement Dash Ball Mount Holder for Dashboard Windshield Windscreen for Garmin Nuvi RV Dezl Drive Drivesmart Zumo Driveassist DriveLuxe |
|---|---|
| Category | Electronics > GPS, Finders & Accessories > GPS System Accessories > Vehicle Mounts |
| Brand | EWAY |
| Manufacturer | EWAY |
| Model Name | EWAY Garmin GPS Mount |
| Model Number | 91e582ce-83d7-41ae-9d79-c2d8568fb3ca |
| Color | Black |
| Item Weight | 0.15 Kilograms |
| Compatible Devices | GPS Mount for Car Windscreen compatible with Garmin Nuvi 1100 1200 1250 1260 1300 1350 1370 1390 1450 1490 1690 (LM LMT T), 2200 2250 2300 2350 2360 2370 2450 2455 2457 2460 2475 2495 2497 2539 2555 2557 2558 2559 2577 2589 2595 2597 2598 2599 2639 2689 2699 (LM LMT LT), 3450 3490 3550 3590 3597 3750 3760 3790 5000 (LM LMT), 30 40 42 44 50 51 52 54 55 56 57 58 60 61 65 67 68 (LM LMT), 200 205 250 255 260 265 270 275 285 295 350 360 370 465 500 550 600 610 650 660 670 680 750 755 760 765 770 775 780 785 850 855 880 885 (W WT T LMT), etc |
| Compatible Phone Models | Standard 17 mm GPS Car Mount For All Garmin Nuvi GPS: Such as 1100 1200 1250 1260 1300 1350 1370 1390 1450 1490 1690 2200 2250 2300 2350 2360 2370 2450 2460 3450 3490 3550 3590 40 50 60 200 205 250 260 270 350 360 370 500 550 600 610 650 660 670 680 750 760 770 780 850, and more |
| Mounting Type | Windshield |
| Additional Features | Adjustable |
| Water Resistance Level | Not Water Resistant |
| Compatible with Vehicle Type | Car, Truck, Boat |
| Arm Length | 4.64-6.57 Inches |
| Shape | Rectangular |
| Mfr Part Number | 91e582ce-83d7-41ae-9d79-c2d8568fb3ca |
| Warranty Description | 1 |
| Built-In Media | Replacement GPS Dash Ball Mount Dashboard Windshield Car Holder for Garmin Nuvi Dezl Drive Drivesmart Zumo Driveassist DriveLuxe StreetPilot RV |
| Enclosure Material | Plastic |
Available variants
Number Of Items
- 1
- 2
Recommended next
Garmin 010-10908-02 Portable Friction Mount
The Garmin 010-10908-02 is a portable dash friction mount designed to hold compatible Garmin nüvi and StreetPilot devices securely on stable surfaces. It focuses on quick in-and-out mounting, adjustable viewing angles, and a grip-on-dash approach that avoids common windshield suction issues.
Randconcept GPS Mount for Garmin (Nuvi 17mm swivel ball) suction dashboard/windshield holder
A compact suction-cup mount made for Garmin Nuvi models that use a 17mm swivel ball mounting pattern. It offers vertical adjustment and 360-degree rotation, plus a 3M sticky disc to help the suction hold on textured surfaces. Best for drivers who want a simple replacement dash or windshield mount, with the main caveat that road vibration can affect stability for some setups.
RAM MOUNTS Tough-Claw Small Clamp Mount Base – B Size 1" Ball, Fits 0.625"-1.14" Rails (RAP-B-400U)
The RAM MOUNTS Tough-Claw Small Clamp Mount Base (RAP-B-400U) is a compact clamp-on mounting base built for odd-shaped rails and bars. It’s designed to quickly attach to rails in the 0.625" to 1.14" range and pair with RAM 1" B-size ball components, making it a strong fit for phones, tablets, action cameras, and rod-holder style setups. The main tradeoff to consider is that the clamp can take a bit of effort to open wide enough on larger-diameter tubes.
Miracase Phone Holders for Your Car with Metal Hook Clip, Air Vent Cell Phone Stand Car Mount, Dark Black
The Miracase air-vent phone mount uses a metal hook and clamp arms to hold phones securely while you drive. It’s designed for most phones from 4.0 to 7.2 inches (including thicker cases) and supports 360-degree rotation for portrait or landscape viewing. The main caveat is compatibility: it fits horizontal and vertical air vents (not round vents), and the vent blade width needs to be under about 1.4 inches.