EWAY 2PCS GPS Car Holder Mount for Garmin Nuvi Windshield
Quick take
This EWAY 2-pack is a replacement GPS mount for Garmin devices that use a 17mm swivel ball mounting pattern. It’s designed to stick firmly to windshield or dashboard surfaces with a gel suction pad, and the ball joint supports 360-degree angle adjustment. The main caveat is compatibility and mounting surface, since suction can weaken on some surfaces when they get hot.
Pros and cons
Pros
- Replacement mount aimed at Garmin devices with a 17mm swivel ball pattern
- Strong sticky gel pad for windshield, dashboard, and other smooth flat surfaces
- 360-degree ball joint for adjusting viewing angle without moving the whole mount
- Dual-pack value if you want a spare for a second vehicle
Cons
- Not compatible with certain Garmin Drive/DriveSmart and RV/dashboard lines, so double-check your exact model
- Suction performance can depend on temperature and surface type
- It is for windshield and dashboard use, so it may not suit all mounting preferences
What buyers think
Buyer feedback is mostly focused on grip, stability, and ease of setup. Many shoppers describe the suction as holding securely for everyday driving, including on bumpy roads, and note that once positioned it tends to stay put. Several reviews call it an easy replacement option for a Garmin holder. Where feedback is less consistent, it typically relates to mounting conditions, with some buyers saying the mount may not remain attached in hotter conditions, or that they improved results by using additional low-strength adhesive on their setup. Overall, the review evidence suggests this is a solid replacement for the right Garmin fit, but suction reliability can vary based on surface and heat exposure.
What this mount is for
The EWAY 2PCS GPS Car Holder Mount is designed to replace a Garmin windshield or dashboard holder, specifically for Garmin GPS units that use the 17mm swivel ball connection. If your Garmin currently uses that ball joint style, this mount should snap in as a like-for-like replacement, with the benefit of a strong suction pad and a rotatable joint.
Compatibility and the one thing to verify first
Compatibility is the biggest deciding factor. This mount targets Garmin devices that use the 17mm swivel ball mounting pattern, and it is promoted for a wide range of Nuvi and related lines that use that style of connection. However, it also explicitly notes incompatibility with certain Garmin models and series, including several Garmin Drive and related lines (and it also mentions that items like mounting bracket/cradle/socket can be excluded).
Before buying, confirm your Garmin model and the connection type. If your current mount uses a different ball size or a different attachment interface, this will not be the right replacement.
Design and adjustment: how it aims to stay usable while driving
The holder uses a reinforced hard plastic base and a ball joint that supports 360-degree rotation. That matters if you switch between portrait and landscape viewing angles, need to reduce glare, or want the screen positioned so it does not block your view. Installation is meant to be tool-free, using the gel suction pad to adhere to windshield or dashboard surfaces.
Suction cup gel pad performance, including real-world limitations
The suction pad is built around a 2.5-inch strong sticky gel pad, intended for windshield, dashboard, countertop, or other smooth flat surfaces. It is also described as reusable, with guidance to rinse the sticky surface with warm water and wipe dry to restore adhesion.
In practice, buyer feedback points to strong grip for many setups, but also highlights that heat and surface conditions can change results. If your car interior gets extremely hot, or if your dashboard has a textured finish that does not stay “smooth,” suction may loosen over time. If that’s your situation, plan for more frequent repositioning checks, or consider using additional low-strength adhesion solutions suited to your surface (as some buyers report doing).
Pros and cons for different buyers
Best for
- Garmin owners who need a replacement mount for a 17mm swivel ball pattern
- Drivers who want an adjustable viewing angle without removing the mount
- People who want a spare mount for a second vehicle
- Shoppers prioritizing suction stability on smooth windshield or dashboard surfaces
Who should avoid it
- Garmin owners whose device uses a different mount connection type (not the 17mm swivel ball pattern)
- Anyone with mounting surfaces that are not smooth or that experience strong heat exposure
- Buyers who need a non-suction mounting style (this is a windshield/dashboard suction approach)
Price and availability
This is positioned as a low-cost replacement accessory, and it comes as a two-piece pack. Availability may vary by seller and time, so the clearest current pricing is the live listing. You can check the latest price and terms here: Buy on Amazon.
Final verdict
The EWAY 2PCS GPS Car Holder Mount for Garmin Nuvi Windshield is a practical, dual-pack replacement for the right Garmin models that use a 17mm swivel ball connection. The main strengths are suction grip on suitable surfaces and flexible 360-degree positioning. Just make sure compatibility is a match, and be realistic that suction performance can depend on heat and the exact dashboard or windshield surface.
FAQ
Is this mount compatible with all Garmin GPS units?
No. It is intended for Garmin devices that use a 17mm swivel ball mounting pattern. Some Garmin series are explicitly not compatible, so check your exact Garmin model and mount connection type before purchasing.
Does the suction cup work on dashboards and windshields?
It is designed to adhere to windshield and dashboard surfaces, and other smooth flat surfaces. Buyer feedback suggests it can hold well on suitable smooth plastics, but adhesion can vary with surface type and heat.
Will the mount adjust while driving to different angles?
Yes. The ball joint is designed for 360-degree rotation, allowing you to set the viewing angle without moving the base repeatedly.
Is it reusable if the gel pad loses grip?
The mount is described as reusable, with guidance to rinse the sticky surface with warm water and wipe it dry to restore adhesion.
Does the package include two mounts?
Yes, it comes as a 2-piece set, which can be helpful if you want a spare mount for another vehicle.
Specifications
| Product Title | EWAY 2PCS GPS Car Holder Mount for Garmin Nuvi Windshield Dashboard with Strong Suction Cup, 17mm Swivel Ball Mounting Pattern Replacement for Garmin GPS Navigator Navigation Car Dash Mount Cup Holder |
|---|---|
| Category | Electronics > GPS, Finders & Accessories > GPS System Accessories > Vehicle Mounts |
| Brand | EWAY |
| Manufacturer | EWAY |
| Model Name | GPS Suction Cup Mount for Garmin |
| Model Number | GPS Suction Cup Mount for Garmin |
| Color | Black |
| Item Weight | 0.02 Kilograms |
| Compatible Devices | For Garmin Streetpilot I, c510, c530, c550, c580, i, i2, i3, i5. |
| Compatible Phone Models | For Garmin Nuvi 1100 1200 1250 1260 1300 1350 1370 1390 1450 1490 1690 (LM LMT T), 2200 2250 2300 2350 2360 2370 2450 2455 2457 2460 2475 2495 2497 2539 2555 2557 2558 2559 2577 2589 2595 2597 2598 2599 2639 2689 2699 (LM LMT LT), 3450 3490 3550 3590 3597 3750 3760 3790 5000 (LM LMT), 30 40 42 44 50 51 52 54 55 56 57 58 60 61 65 67 68 (LM LMT), 200 205 250 255 260 265 270 275 285 295 350 360 370 465 500 550 600 610 650 660 670 680 750 755 760 765 770 775 780 785 850 855 880 885 (W WT T LMT) |
| Mounting Type | Windshield and Dashboard |
| Additional Features | Rotatable |
| Water Resistance Level | Water Resistant |
| Compatible with Vehicle Type | Automobile, Truck |
| Unit Count | 2.0 Count |
| Shape | Round, Rectangular |
| Warranty Description | 1 |
| Built-In Media | 2pcs strong suction mount for Garmin GPS |
| Enclosure Material | Plastic |
Recommended next
Garmin 010-10908-02 Portable Friction Mount
The Garmin 010-10908-02 is a portable dash friction mount designed to hold compatible Garmin nüvi and StreetPilot devices securely on stable surfaces. It focuses on quick in-and-out mounting, adjustable viewing angles, and a grip-on-dash approach that avoids common windshield suction issues.
RAM MOUNTS B Size 1" Double Socket Mount Arm – Medium Composite (RAP-B-201U)
The RAM-B-201U is a medium-length RAM double-socket arm for B size (1-inch) ball-and-socket systems. It gives you flexible positioning with “near-infinite” angle adjustment and quick pivot setup using a spring inside the arm. Best for riders and vehicle setups that need a compact arm length and strong, marine-grade composite construction, with the main caveat that you must build the rest of your mount with compatible B size components.
Miracase Phone Holders for Your Car with Metal Hook Clip, Air Vent Cell Phone Stand Car Mount, Dark Black
The Miracase air-vent phone mount uses a metal hook and clamp arms to hold phones securely while you drive. It’s designed for most phones from 4.0 to 7.2 inches (including thicker cases) and supports 360-degree rotation for portrait or landscape viewing. The main caveat is compatibility: it fits horizontal and vertical air vents (not round vents), and the vent blade width needs to be under about 1.4 inches.
RAM MOUNTS Diamond Ball Base with 2-Hole AMPS Pattern, B Size 1" Ball Mount (RAM-B-238U)
The RAM-B-238U is a RAM Mounts B-size (1-inch ball) diamond plate base with a 2-hole AMPS pattern, designed to bolt into a vehicle or gear setup and then connect to any compatible RAM ball-and-socket system. It is made from powder-coated, marine-grade aluminum and uses RAM’s adjustable ball-and-socket connection for flexible positioning. The main caveat is fitment: you will need to pair it with the right RAM device holder/cradle and confirm your AMPS spacing matches.