eSynic Portable Optical to RCA Adapter (7 ft, Built-in DAC, PCM 192kHz)
Quick take
This optical-to-RCA converter lets you feed L/R RCA inputs from an optical audio source such as a TV, Blu-ray/DVD player, or gaming console. Buyers commonly describe the setup as straightforward and the sound as clear, with minimal audible noise or delay. The main caveat is compatibility: it supports PCM audio only (not Dolby/DTS), and it is strictly one-way (optical in to RCA out).
Pros and cons
Pros
- Designed to bridge modern optical outputs to legacy RCA stereo systems.
- Built-in DAC support up to 192kHz/24-bit PCM for higher-resolution PCM playback.
- Long 7 ft optical cable helps when your TV and receiver/speakers are far apart.
- Metal/aluminum housing and gold-plated RCA ports for a more robust physical build.
Cons
- Works with PCM 2.0 only, so it will not decode Dolby or DTS bitstreams.
- One-way conversion only (optical to RCA), not a bidirectional connection.
- Volume and audio level control come from your speaker or amplifier, not the adapter.
- Needs USB power (USB power adapter not included).
What buyers think
Buyer review evidence is largely consistent on a few points. Setup is described as easy and quick, especially when the TV is configured to output PCM over the optical connection. Many buyers also report that audio comes through clearly, with no obvious static, and they do not commonly mention lag or sync problems in typical stereo use. The adapter’s compact size and the practical convenience of the built-in 7 ft cable are recurring strengths when the receiver is tucked behind the TV stand or when the TV is wall-mounted. Overall, the dominant sentiment is that it’s a dependable, straightforward way to get optical audio working on older RCA-based audio gear.
Who this adapter is for
The eSynic Optical to RCA Adapter is a good fit if you have a modern source with optical audio output and you want to use it with a stereo receiver, integrated amplifier, or powered speakers that accept RCA inputs. It’s especially relevant for people trying to keep older equipment in service rather than upgrading to a new AVR just to handle HDMI or newer audio formats.
Best use cases
- Connecting a TV with an optical output to a vintage stereo receiver using RCA inputs.
- Using game consoles or disc players that output optical audio into an RCA stereo setup.
- Installing audio gear where a longer optical run is helpful (the built-in 7 ft cable can reduce the need for extra extensions).
Compatibility and setup you should plan for
Most “it works” outcomes come down to matching the adapter’s limits with your source device settings.
PCM-only support (important)
This converter supports PCM audio only. If your TV or source outputs Dolby/DTS formats over optical, you will need to switch the TV’s digital audio output to PCM 2.0. If you are unsure what your device is sending, look in the TV’s Audio settings for an option such as “PCM,” “Stereo,” or “Digital audio format,” and avoid Dolby/DTS output modes.
One-way connection
It converts optical input to RCA output only. It is not intended to go the other direction or to connect RCA to optical.
Power requirements
The adapter requires USB power (a 5V/1A USB power adapter is needed, but it is not included). Some setups are easiest when the TV has a nearby USB port for powering the converter.
Volume behavior
Because it outputs audio through RCA to your amplifier or speakers, volume control typically happens at the receiver or speaker system. In other words, the adapter is not a volume knob, it is a format bridge.
Pros and cons, translated into real-world buying decisions
Pros that matter
- Clear stereo bridging: Review themes point to straightforward operation for PCM stereo content into legacy RCA hardware.
- Long built-in cable: A 7 ft run can make installation cleaner, especially behind wall-mounted TVs or in compact media consoles.
- Physical build: The aluminum housing and gold-plated RCA connectors suggest a more durable, less flimsy accessory than many basic plastic adapters.
Tradeoffs to consider
- Format limitation: If your TV streams Dolby/DTS, you must change settings to PCM 2.0 or you may not get audio in the expected way.
- No “remote volume” expectation: Plan to control volume through your stereo system, not through the adapter.
- USB power needed: If your setup has no convenient USB outlet, you may need to add a USB power adapter.
- Cable length depends on your layout: 7 ft can be enough for many rooms, but if your components are farther apart, you might still need planning for cable routing.
Price and availability
This adapter is positioned as a budget-friendly way to add optical-to-RCA conversion for stereo systems. For the most accurate current pricing and stock status, check the listing on the retailer page.
Verdict
If you have a TV, Blu-ray/DVD player, or gaming console that outputs optical audio in PCM 2.0, the eSynic Portable Optical to RCA Adapter is a practical, easy-to-integrate way to connect to older RCA stereo equipment. The biggest reason to pass is if you rely on Dolby/DTS over optical and do not want to change your TV’s audio output settings, since this converter is PCM-only.
FAQ
What audio formats does this optical to RCA adapter support?
It supports PCM (PCM 2.0) only. It is not compatible with Dolby or DTS bitstreams, so your source device typically needs to output PCM over optical.
Is this adapter bidirectional, or does it only convert optical to RCA?
It is one-way only. Optical in converts to RCA out, and it is not intended to convert RCA back to optical.
Does the adapter control volume?
No. Volume control is handled by your connected stereo system or amplifier. The adapter’s job is to convert the audio format from optical to analog RCA.
Does it need a power adapter?
Yes, it needs USB power (USB power adapter requirements are listed as 5V/1A). A compatible USB power adapter is not included.
How long is the optical cable?
The unit includes a built-in 7 ft optical cable for connecting between your optical source and the adapter location.
Will it work with a TV that has optical output but only an eARC/ARC setup?
If your TV can output optical PCM through its optical output (even when using eARC/ARC features), it can work. The key is ensuring the TV is set to send PCM 2.0 over the optical connection.
Ready to confirm compatibility for your setup? Buy on Amazon
Specifications
| Product Title | eSynic Portable Optical to RCA Adapter-7 FT Long-Built-in DAC Chip-Easy to Setup-192KHZ Digital to Analog Converter-Aluminum Shell-from HDTV/Blu-ray/DVD/Gaming Consoles to L/R Stereo Audio System |
|---|---|
| Category | Electronics > Home Audio > Home Audio Accessories > Digital-Analog Converters |
| Brand | eSynic |
| Manufacturer | eSynic |
| Maximum Supply Voltage | 2 Volts |
| Minimum Supply Voltage | 5.5 Volts |
| Mounting Type | Optical to RCA Plug & Play |
| Number of Pins | 4 |
| Upper Temperature Rating | 70 Degrees Celsius |
| Interface | Optical to RCA |
| Number of Channels | 2 |
| Audio Output Mode | Analog |
| Material Type | Aluminum |
| Brand Name | eSynic |
| Compatible Devices | TVs, Blu-ray players, DVD players, Gaming consoles (PS5), Any device with optical audio output supporting PCM format |
| Part Number | Optical to RCA Converter-ESY187 |
| Model | Optical to RCA Converter-K |
| Included Components | 1* Optical to RCA Converter,1*Beautiful Box With eSynic Logo |
| Unit Count | 1.0 Count |
Available variants
Style
- Optical to RCA
- eARC/ARC to RCA
Recommended next
VPFET HDMI Audio Extractor 4K HDMI to Optical 3.5mm AUX Audio Adapter Splitter Converter Support HDCP Digital DTS 5.1 PCM
The VPFET HDMI Audio Extractor lets you pull audio out of an HDMI source and send it to speakers or an AV receiver via optical (TOSLINK) and 3.5mm. It is a good fit for HDMI-only devices and older TVs or projectors that lack digital audio out, but it requires choosing the right audio mode (2.0, 5.1, or pass) and it does not support ARC/eARC input.
Neoteck 192kHz DAC Converter 7ft/2.1m Optical to RCA Cable SPDIF to RCA Digital to Analog Converter
A simple TOSLINK (optical) to RCA DAC meant to bring digital TV or console audio into an older receiver or speaker system with RCA inputs. It outputs 2-channel PCM (not 5.1), and the biggest buying caveat is making sure your TV or streaming device is set to PCM instead of “auto” for compatibility.
Cubilux USB A to TOSLINK Optical Audio Adapter, Unidirectional USB review
The Cubilux USB A to TOSLINK adapter converts USB-A audio from a computer into an optical (TOSLINK) S/PDIF output for speakers, soundbars, DACs, and amps that accept optical. It is plug-and-play on Windows and Mac, with support for multiple high-resolution sample rates, but it is explicitly limited to computer use (not TV, Xbox, or Switch).
OREI HDMI eARC & ARC Audio Extractor Converter (DA25)
The OREI DA25 converts your TV’s HDMI ARC/eARC audio into analog stereo you can send to RCA L/R and a 3.5mm headphone input. It is an easy, no-driver setup option for speakers, soundbars, or headphones that lack ARC/eARC, but it outputs only 2-channel audio and does not provide full eARC features like CEC or volume control.