eifagur 4G LTE 9dBi SMA Male Cellular Universal Wide Band Omni Directional Antenna (2-Pack)
Quick take
This 2-pack delivers 9dBi gain in an omni-directional design with an SMA male connector, aiming to give a stronger, more stable LTE signal across a wide frequency range. It is a practical choice for many 4G LTE routers, mobile hotspots, and cellular trail cameras that use SMA inputs. The main caveat is that stronger signal does not always translate to faster download speeds, and some router setups may behave oddly after reboot when the antennas are connected.
Pros and cons
Pros
- Wide LTE coverage across multiple bands (698-960 MHz, 1710-2170 MHz, 2300-2700 MHz) with 50-ohm impedance.
- Omni-directional antenna design, suitable when you cannot point toward a specific tower direction.
- Comes as a 2-pack, helpful when replacing a router’s dual antenna setup.
- Buyer feedback is generally positive for basic replacement and signal quality, with no consistent interference reports.
Cons
- Real-world speed improvements appear mixed, with some users seeing similar throughput to stock antennas.
- Compatibility details matter, since performance depends on matching your device’s antenna ports and effective band usage.
- Limited evidence around reboot behavior, where at least one setup had trouble re-associating until the original antennas were swapped back.
What buyers think
Buyer-review evidence is mixed but generally supportive for day-to-day signal use. Several users describe the antennas as working well as replacements (including for off-brand or specific router/camera setups) and report improved or comparable signal strength. However, at least some buyers did not see a meaningful jump in actual speeds, even when signal metrics improved. Build and basic functionality also appear straightforward, since most feedback focuses on whether the antennas perform as intended after installation.
Overall, the pattern suggests these antennas can be a reasonable upgrade for signal quality, especially when you need omni-directional coverage, but you should not expect the same speed gains in every network environment.
What this antenna is designed to do
This is a cellular external antenna intended for 4G LTE use on many North American and worldwide networks. It is specified as an omni-directional antenna with linear vertical polarization and a claimed 9dBi gain. It uses an SMA male connector (pin inside) and targets a broad set of frequency ranges, which makes it easier to match with devices that support LTE operation across multiple bands.
Key specs that affect real compatibility
Connector type and antenna port match
It uses an SMA male connector (pin inside). This means your router, hotspot, trail camera, or cellular device must have SMA inputs that accept this style. If your device uses different connectors (for example, RP-SMA, N-type, or proprietary ports), you may need adapters or a different antenna model.
Frequency coverage (the “will it fit my carrier?” question)
The stated frequency ranges are 698-960 MHz, 1710-2170 MHz, and 2300-2700 MHz. Those ranges cover many common LTE deployments, but your results still depend on which LTE bands your carrier uses in your area and how your device is configured.
Impedance and signal expectations
It is specified at 50 ohms impedance, VSWR listed as less than 2.0, and it is designed for omni-directional coverage. These are important electrical characteristics for compatibility with typical cellular modem and router antenna systems, but real-world performance still varies based on tower distance, building attenuation, and your installation location.
Pros and cons for different buyers
Best for
- People replacing stock LTE antennas on compatible routers or mobile hotspots, especially when you want omni-directional coverage.
- Cellular trail camera or outdoor security deployments that need an external antenna option (assuming you have an SMA male connection point).
- Buyers who want a low-cost, wide-band antenna approach and are optimizing for signal quality rather than guaranteed speed increases.
Potentially not ideal for
- Situations where your carrier uses LTE bands outside the listed frequency ranges, or where your installation location is extremely limited.
- Buyers expecting a dramatic throughput increase regardless of their existing signal conditions.
Installation and setup tips that matter
- Check port type first. Confirm your device has SMA inputs that match SMA male (pin inside), or plan for correct adapters.
- Choose a practical placement. Even omni-directional antennas benefit from higher mounting and fewer obstructions. Try to avoid metal enclosures or placement right against large reflective surfaces.
- Replace in pairs if your router expects two antennas. Since this is a 2-pack, it is well-suited for dual-antenna devices, which can help keep your setup consistent.
- If you run into reboot issues, test swapping back. If your router struggles to re-associate after restart with the antennas attached, you may need a short troubleshooting step: boot with the original antennas, then reconnect and retest.
Verdict: is it worth it?
If you have a compatible device with SMA male antenna ports and you need a wide-band omni-directional LTE antenna upgrade, this 2-pack is a sensible option. Expect the most reliable benefit to be improved signal quality or stability, not necessarily a consistent, large jump in download speeds. It is especially attractive when you need a simple replacement that covers multiple LTE bands. If you are chasing peak throughput, you may need to focus more on placement, carrier band conditions, and antenna types suited to your signal situation.
FAQs
Will these improve my 4G LTE signal and speed?
They are intended to strengthen LTE reception, and some buyers report improved signal quality. Speed gains are not guaranteed, and at least some users saw little change in throughput compared with stock antennas.
What devices are these compatible with?
They are meant for 4G LTE routers, mobile hotspots, and cellular trail cameras that use SMA male antenna ports. Commonly supported examples include certain Huawei, ZTE, and other LTE router and surveillance device models that accept LTE omni antennas, but you should confirm your device’s connector type and LTE band compatibility.
Do I need two antennas or just one?
This item comes as a 2-pack, which is useful for routers that use two external antennas. If your device only supports a single antenna, you may not need both, depending on its antenna configuration.
What frequency bands does it cover?
It lists coverage across 698-960 MHz, 1710-2170 MHz, and 2300-2700 MHz. Your actual performance depends on which LTE bands your carrier uses in your area and how your device is configured.
What does “SMA male (pin inside)” mean?
SMA male (pin inside) is the connector orientation. Your device must accept this connector type, typically via an SMA input designed for an antenna with a pin in the center.
Is omni-directional better than directional antennas?
Omni-directional antennas can be a good choice when you cannot point your antenna toward a specific tower or when tower direction changes. Directional antennas may perform better in some fixed, long-range scenarios, but they require more careful pointing.
Where can I buy it?
Specifications
| Product Title | 4G LTE 9dBi SMA Male Cellular Universal Wide Band Omni Directional Antenna Compatible with 4G LTE Wireless Router Mobile Hotspot Wireless Home Phone HCO Spartan Trail Camera（2-Pack）, Eifagur |
|---|---|
| Category | Cell Phones & Accessories > Accessories > Signal Boosters |
| Brand | eifagur |
| Manufacturer | eifagur |
| Color | Pannel Antenna |
| AntennaDescription | A 4G LTE antenna with 9dBi gain, omni-directional polarization, and an SMA male connector, suitable for use within the specified frequency ranges. |
| Number of Items | 2 |
| Unit Count | 2.0 Count |
| Number of Channels | 3 |
| Impedance | 50 Ohms |
| Antenna | A 4G LTE antenna with 9dBi gain, omni-directional polarization, and an SMA male connector, suitable for use within the specified frequency ranges. A 4G LTE antenna with 9dBi gain, omni-directional polarization, and an SMA male connector, suitable for use within the specified frequency ranges. See more |
Available variants
Color
- Pannel Antenna
- Magnetic Antenna
Recommended next
weBoost Home MultiRoom (model 470144) cell phone signal booster
The weBoost Home MultiRoom is a directional, FCC-approved booster designed to reduce dead zones and improve 4G LTE and 5G coverage across up to ~5,000 sq ft. It’s aimed at households with weak outdoor signal who want better call quality and faster data without relying on Wi‑Fi calling, and it works for multiple U.S. carriers, as long as your carrier’s bands are supported and the outdoor antenna can be pointed toward the tower.
weBoost Drive 4G-X OTR (470210) Truck Cell Phone Signal Booster
The weBoost Drive 4G-X OTR (470210) is a truck-focused 4G booster built to strengthen cellular coverage for you and your passengers when you travel through weak-signal areas. It offers multi-user support, a weather-resistant 17-inch omnidirectional antenna, and FCC approval, with performance that depends heavily on having some usable signal to boost.
HiBoost Cell Phone Signal Booster for Home and Office, 4,000 sq ft
The HiBoost 4,000 sq ft home signal booster is designed to improve weak Verizon and other US-carrier reception across 2G through 5G-compatible bands. It uses an outdoor directional antenna plus an indoor antenna, and includes app-assisted setup with an LCD to help you tune for better coverage across multiple rooms and users, with the main caveat being that installation and tuning require some planning (and, in practice, some device connectivity can make app setup easier).
weBoost Home Complete (Model 470145) signal booster for 5G and 4G LTE
weBoost Home Complete is a powerful, FCC-approved home cell signal booster kit designed to improve coverage across up to 7,500 square feet for compatible U.S. carriers. It’s a strong DIY option for whole-home weak-signal problems, but real-world results depend heavily on mounting, antenna direction, and whether you’re boosting the right carrier bands for your area.