EDISHINE Motion Sensor, 180-Degree Replacement Motion Detector for Security Floodlights
Quick take
The EDISHINE 180-degree PIR motion sensor is designed to replace the motion control inside compatible 120V floodlight setups, giving you adjustable sensitivity, a delayed shutoff timer, and three control modes (auto, dusk-to-dawn, and a manual override).
It tends to work well once installed and tuned for your viewing area, but it is only meant for 3-wire fixtures, so compatibility is the main thing to double-check before ordering.
Pros and cons
Pros
- Three operating modes for different lighting behavior (AUTO, dusk-to-dawn, and manual override).
- Adjustable settings for detection range (up to 60 feet) and delayed OFF time (0 to 10 minutes).
- Wide aiming adjustability with an adjustable sensor neck for better coverage.
- Designed as a replacement to avoid buying an entire floodlight kit, and buyers report it installs and programs easily.
Cons
- Only compatible with 3-wire fixtures, which rules out some floodlight models.
- Best performance depends on setup, including using the TEST/setup routine and tuning sensitivity for your space.
- Battery is not included, so power and wiring are important for operation.
What buyers think
Buyer-review evidence is generally consistent on practical usability. Many shoppers describe the sensor as an effective replacement for a failed or “stuck on” motion control, with motion sensing working as described after installation. Several comments also highlight that the adjustable detection area and the time delay controls help reduce overly sensitive triggering (for example, tuning it so it reacts to nearby movement rather than far-away passersby). Setup and programming are frequently described as straightforward, though a few buyers note that following the test/setup steps matters for getting expected behavior. Long-term durability feedback appears positive but is not detailed enough to predict lifespan precisely for every installation.
Key features and how they affect daily use
Three control modes, including dusk-to-dawn
This motion sensor is built for flexible lighting routines. In AUTO mode, the connected light turns on when motion is detected and then turns off after a selectable delay time. In dusk-to-dawn mode, an integrated photocell is used to prevent daytime activation, so the sensor works automatically in the dark. There is also a manual override mode that keeps the device on for an extended period after a fast wall-switch toggle, which can be handy when you need light for a task.
Adjustable detection range and timer
The sensor supports an adjustable delayed OFF time (0 to 10 minutes). That matters if you want a shorter “walk-by” lighting window or a longer stay-on interval for parking, unloading, or navigation. The detection range is specified up to 60 feet within a wide 180-degree sensing angle, but real-world coverage depends on placement, temperature, and how the sensor is angled.
Adjustable sensor neck for aiming
An adjustable sensor neck helps you aim the detector where you want coverage, which is important for avoiding accidental activation from side movement. Buyers who care about tuning often mention the benefit of being able to set the detection area so it responds to the right approach routes.
120V compatibility and wiring expectations
This is a 120V (60 Hz) replacement motion sensor intended for specific fixture wiring. The key constraint is compatibility: it is only designed for 3-wire fixtures. If your current floodlight or outdoor light uses a different wiring configuration, you may need a different replacement sensor or a different approach altogether.
Installation and setup notes that show up in feedback
Review evidence points to a generally smooth install experience for people replacing an existing motion sensor. A recurring theme is that getting expected performance may require following the instructions closely, especially using the TEST/setup routine and then fine-tuning sensitivity for your space.
If your goal is to reduce false triggers, start with the minimum sensitivity or a shorter detection expectation, then adjust upward only if you are not seeing motion triggers at the distances you want. Buyers also report that time delay behavior matches what they set once configured correctly.
Pros and cons for the right buyer
Best for
- People replacing a motion sensor in an existing 120V outdoor floodlight setup.
- Buyers who want adjustable range and an adjustable “lights on” duration.
- Homes needing motion lighting in dark hours, with dusk-to-dawn behavior.
- Anyone who cares about coverage direction and wants to aim the detector at a specific approach path.
Who should avoid it
- Shoppers with floodlights that are not 3-wire fixtures, since compatibility is required for safe, stable operation.
- Buyers who want a plug-and-play replacement without tuning, because setup and aiming can affect responsiveness.
- Anyone expecting battery-powered operation, since battery is not included and it is meant to be wired to the fixture power.
Verdict: is the EDISHINE sensor worth it?
The EDISHINE motion sensor is a solid value-oriented choice if you have a compatible 3-wire 120V floodlight and you want an adjustable PIR replacement. Buyers generally report that it restores motion control that was failing or behaving poorly, and the adjustable sensitivity and time delay help tailor lighting behavior to real movement patterns around driveways and entrances. The main reason it may disappoint is mismatched wiring compatibility or skipping the setup and tuning steps that influence how “sensitive” the sensor feels in your specific location.
FAQ
Does this motion sensor work with any outdoor floodlight?
No. It is specifically designed for 3-wire fixtures. Check your existing fixture wiring before ordering.
What modes does it have?
It includes three modes: AUTO (works at night and turns off after a set delay), dusk-to-dawn (uses a photocell to avoid daylight triggering), and a manual override mode that keeps the lights on for an extended period after a quick wall switch toggle.
How far does it detect motion?
The detection range is adjustable and can reach up to 60 feet at a 180-degree sensing angle, depending on placement and conditions.
Can I adjust how long the light stays on after motion?
Yes. The delayed OFF time in AUTO mode can be adjusted from 0 to 10 minutes.
Is a battery included?
No, battery is not included. The sensor is intended to be wired into a 120V fixture setup.
Is it difficult to install?
Review evidence suggests installation is straightforward for people replacing a failed motion sensor, but you should still follow the provided wiring and setup instructions, including the TEST/setup step, to get the behavior you expect.
Specifications
| Product Title | EDISHINE Motion Sensor, 180-Degree Replacement Motion Detector for Security Floodlights, 120V Adjustable Time & Detection Sensitivity Range Up to 60 Feet, 3 Modes Pir Motion Sensor, White, UL Listed |
|---|---|
| Category | Electronics > Security & Surveillance > Motion Detectors |
| Brand | EDISHINE |
| Manufacturer | EDISHINE |
| Model Number | HMSS01A |
| Color | White |
| Item Weight | 100 Grams |
| Power Source | Corded Electric |
| Maximum Range | 60 Feet |
| Mounting Type | Wall Mount |
| Battery Description | Battery not included |
| Compatible Devices | Light |
| Upper Temperature Rating | 50 Degrees Celsius |
| Frequency | 60 Hz |
| Item Dimensions D x W x H | 4.53"D x 3.15"W x 2.56"H |
| Manufacturer Warranty Description | 1 Year Manufacturer |
| Mfr Part Number | HMSS01A |
| Item Type Name | Replacement Motion Sensor |
| Built-In Media | Motion sensor |
Available variants
Color
- White-2pack
- Black
- White
- Brown
Recommended next
Wireless Motion Sensor LED Light - Motion Detector Alarm Chimes Door Sensor with 500 FT Range Security Alert Monitor System
A wireless motion-triggered LED light and chime alarm system designed for home, small business, and office monitoring. It pairs a plug-in receiver with one or more motion sensors for alerts up to 500 ft, with 58 ringtones and 5 volume levels, including an option that’s basically silent except for flashing LEDs. The main tradeoff to plan for: it will also trigger on plenty of everyday movement, so placement and expectations matter, and the sensor should be kept out of rain.
Aqara Presence Sensor FP2, mmWave Radar Wired Smart Motion Sensor, Zone Positioning, Multi-Person & Fall Detection
Aqara’s Presence Sensor FP2 uses mmWave radar to detect human presence, supports up to 30 custom zones for automations, and can be ceiling-mounted for fall detection. It is wired (power adapter not included) and designed for smart home users who want more precise presence triggers than standard PIR sensors, especially across multiple people or rooms. The tradeoff is setup complexity, heavy reliance on the Aqara app for zoning, and some limitations around how much presence detail you can get in certain home platform integrations.
eMACROS Non-APP Wireless Driveway Alarm — 1/2 Mile Solar Motion Sensor with Plug-in Receiver
The eMACROS Non-APP Wireless Driveway Alarm is a solar-powered, wireless motion sensor and plug-in receiver setup designed to alert you from far down a driveway (up to about 1/2 mile, 2640 ft). It’s a strong fit for rural or large properties where you want early warning, but you should expect motion-based alerts to pick up animals and other movement, which can mean occasional false alarms unless you tune placement and sensitivity.
HTZSAFE wireless driveway alarm (1 receiver + 2 motion sensors)
An outdoor/indoor wireless driveway alarm kit with weather-resistant motion sensors, a plug-in receiver, and long-distance transmission (up to 1/2 mile in ideal conditions). It’s designed for larger properties where Wi-Fi or cellular coverage is limited, with adjustable detection sensitivity and expandable coverage if you add more sensors.