Dual Phone Holster Pouch Case for 2 Phones, Double Decker Belt Clip Case for iPhone Pro Max/Plus and Samsung Galaxy Ultra/Plus/FE (Large)
Quick take
This large dual-phone belt holster is designed to carry two compatible phones in a single horizontal pouch, with a magnetic flip closure and a soft microfiber-lined interior. It can also hold cards thanks to built-in card slots and uses belt loops plus a belt clip for more secure on-body carry. The key caveat is fit, it only works with thin phone cases, so thicker case models may not close properly or may not seat correctly.
Pros and cons
Pros
- Holds two phones in separate compartments to reduce direct contact
- Magnetic flip closure and elastic stretch fabric help keep devices positioned
- Microfiber interior helps protect against scratches
- Built-in card slots plus belt loops and safety belt loops for hands-free carry
Cons
- Only fits phones with thin cases (not for thick, rugged, or waterproof-style case builds)
- With two phones installed, the pouch is naturally bulky and has added weight
- Some buyers note that fastening method matters, clipping without proper belt-loop threading may be less secure
What buyers think
Buyer feedback highlights a few consistent themes. Many shoppers like the overall build quality and describe the magnetic closure as smooth and secure for day-to-day carry. A common approval point is convenience, having two phones in one holster is viewed as practical for separating personal and work devices. Buyers also mention that the belt hardware can feel sturdy, and that it generally stays put during typical movements such as sitting or bending, though at least some users stress that correct belt-loop threading affects how stable it feels.
Fit and closure are where opinions can get practical. Several users report successful results with large phones, but they also acknowledge that the pouch may require some stretching if phones are at the upper end of the size range or if phone cases are not as thin as expected.
What this dual phone holster is for
This is a horizontally worn dual-phone holster pouch built for people who want both phones on-body at the same time, without juggling separate single cases. The internal layout uses a middle partition so the two devices do not press directly against each other, and each side has stretch fabric to help the pouch conform to the phone and case combination.
It is also for buyers who want more than phone-only carry. There are built-in card slots that can be handy for a small card or debit card, and the belt setup includes belt loops plus belt clip hardware intended to keep the pouch secure.
Key features that matter for everyday use
Dual compartments with a divider
The holster is built as a two-pocket design, separated by a partition intended to prevent collisions between the two phones. That matters if you carry phones with different sizes or you want to reduce scuffs from constant rubbing.
Magnetic flip closure
A strong magnetic flip closure is intended to hold both phones inside. In reviews, shoppers often mention that the closure feels smooth and secure once engaged.
Microfiber-lined interior
The inside uses a soft microfibre material to help reduce the chance of scratches from contact with the holster fabric or divider.
Belt clip plus belt loops
The pouch includes a belt clip and belt loops (safety belt loops are part of the design) so you can thread it onto a belt more reliably than using a clip alone. Some buyers specifically call out that threading the belt loops correctly contributes to stability.
Card slots for quick access
Built-in card slots let you keep a couple of cards close by, which is useful when you do not want to bring a separate wallet for short outings.
Fit and compatibility: the most important thing to check
This model is sized to fit phones (and two-phone combinations) with specific dimensional limits and it is designed for thin cases. The listed phone dimensions you should pay attention to are roughly up to 6.6 in x 3.26 in x 0.47 in per phone, and the holster’s external sizing is meant for devices in that range. If your phones sit on the larger end of the size range, or your cases are thicker than typical “thin case” profiles, the flap may not close comfortably, or the pouch may need extra stretch.
It is not intended for rugged or thick case types (for example, thick double-layer, waterproof, or certain heavy-duty case designs). Before purchasing, compare your phone’s case thickness and overall footprint against the “thin case” requirement.
Pros and cons in plain terms
When it’s a good buy
- You want one holster to carry two phones side-by-side, such as personal plus work
- Your phone cases are thin enough for the pouch to close properly
- You like horizontal belt carry and want a microfiber-lined interior plus magnetic closure
- You want small-card carry without a separate wallet
When you should look elsewhere
- Your phones use bulky, rugged, waterproof, or double-layer cases
- You prefer a lighter, less bulky carry setup, since two phones naturally add weight
- You want a simple clip-only solution, the belt-loop threading matters for stability
Verdict
The Dual Phone Holster Pouch Case (Double Decker, Large) is a strong choice for buyers who specifically need dual-phone, on-body carry with quick access, and who are using phones in thin cases within the stated size range. If your case setup is thick or you want minimal bulk, it may not be the right match, and you may have better results with a single-phone holster or a different dual-phone design that accommodates thicker cases.
FAQ
Will this fit my phone with a thick case?
No, this holster is designed for phones with thin cases. Thick or rugged case types are specifically not intended to fit, and the closure may not secure properly if your case is too bulky.
Does it carry two phones in the same compartment?
No. It has two separate compartments with a middle partition to help prevent the phones from colliding against each other.
How does the closure work?
It uses a magnetic flip closure intended to hold the pouch shut once both phones are seated.
Is there room for cards?
Yes. It includes built-in card slots on the holster for keeping a few cards or a debit/business card.
Does the belt clip alone keep it secure?
It is designed to use belt loops plus belt clip hardware. Reviews suggest that stability is better when the belt-loop threading is done correctly, especially since the pouch carries two phones.
Specifications
| Product Title | Dual Phone Holster Pouch Case for 2 Phones, Double Decker Belt Clip Case for iPhone (17 16 15 14 13 12 11) Pro Max/Plus, Samsung Galaxy (S25 S24 S23 S22 S21 S20) Ultra/Plus/Fe (Large) |
|---|---|
| Category | Cell Phones & Accessories > Cases, Holsters & Sleeves > Holsters |
| Brand | aubaddy |
| Manufacturer | aubaddy |
| Model Number | DPH130G-BLACK=AUBADDY |
| Color | Black |
| Material | Nylon |
| Item Weight | 130 Grams |
| Mfr Part Number | DPH130G-BLACK=AUBADDY |
| Built-In Media | Belt Clip, Belt Loops, Card Holder |
| Item Type Name | Cell Phone Holster Pouch |
| Unit Count | 2.0 Count |
| Compatible Phone Models | Google Pixel 9 Pro XL, Google Pixel 8 Pro, Google Pixel 7 Pro, Google Pixel 7, Google Pixel 7 Pro, Google Pixel 9 Pro XL, Pixel 8 Pro, Google Pixel 7, Google Pixel 6 Pro, Google Pixel 6, Google Pixel 6A, Google Pixel 5A 5G, Google Pixel 4 XL, Google Pixel 4A 5G, Google Pixel 3A XL, Google Pixel 3 XL, Google Pixel 2 XL, Google Pixel XL,, Samsung Galaxy S25 Ultra, Galaxy S24 Ultra, Galaxy S23 Ultra, Galaxy S22 Ultra, Galaxy S21 Ultra, Galaxy S20 Ultra, Samsung Galaxy S25 Plus, Galaxy S24 Plus, Galaxy S23 Plus, Galaxy S22 Plus, Galaxy S21 Plus, Galaxy S20 Plus, Galaxy S10 Plus Galaxy S9 Plus, Galaxy S8 Plus, Samsung Galaxy S25 FE, Galaxy S24 FE, Galaxy S23 FE, Galaxy S22 FE, Galaxy S21 FE, Galaxy S20 FE,, iPhone 17 Pro Max, iPhone 16 Pro Max, iPhone 16 Plus, iPhone 15 Pro Max, iPhone 15 Plus, iPhone 14 Rro Max, iPhone 14 Plus, iPhone 13 Pro Max, iPhone 12 Pro Max, iPhone 11 Pro Max, iPhone Xs Max, iPhone 8 PLus, iPhone 7 PLus, iPhone 6s PLus, iPhone 6 PLus, |
| Fastener Type | Clip On,Magnetic |
| Compatible Cellular Phone Models | Apple iPhone 16, Samsung Galaxy S23 |
| Enclosure Material | Nylon |
| Item Dimensions W x H | 3.62"W x 6.77"H |
Recommended next
INGIDO leather phone holster with belt clip (iPhone 17/16/15/14 Pro Max, 16/15/14 Plus, and select Galaxy models)
INGIDO’s faux leather phone holster is designed for everyday carry on a belt, with a belt clip plus double belt loops and a magnetic closure. It’s a solid pick for buyers who prioritize quick one-hand access and scratch protection, but you will likely want a plan for limited access to buttons and charging cables while the phone is holstered.
ACCKUO Phone Holster for Belt with Metal Clip and Magnetic
The ACCKUO belt phone holster uses a nylon shell, a soft interior lining, and a strong N52 magnetic closure to keep your phone secure during outdoor or workday use. It offers multiple carry options (belt clip plus vertical and horizontal belt loops, plus a carabiner) and is designed to fit iPhone 12 to 17 models and Samsung Galaxy S22 to S26 (with notes for thicker cases). Main tradeoffs to consider: the fit depends on phone case thickness, and the metal belt clip can be tougher to attach and remove than some alternatives.
Dual Phone Holster, Large Smartphone Pouch, Belt Clip Tool Pouch (XL) by KATOLK
The KATOLK XL dual phone holster is a nylon, belt-worn organizer designed to carry two phones plus everyday essentials like an ID, cash, pens, and small tools. It uses hook-and-loop (Velcro) closure and includes a belt clip plus elastic side bands, but its bulk and clip behavior when sitting may be a deal-breaker for some users.
OtterBox Defender Pro Series Case & Holster for Apple iPhone 13 - Black
OtterBox Defender Pro Series Case & Holster is a rugged iPhone 13 case with a built-in belt clip that can also act as a hands-free kickstand. It focuses on protection, port access (with covered openings), and raised-edge safeguarding for the camera and screen, with wireless charging compatibility. The main caveat is compatibility is iPhone 13 only.