Compatible with Dymo LetraTag Refills, Plastic White Tape, 12mm x 4m (1/2 in x 13 ft), 5 Pack
Quick take
This compatible white plastic label tape is built for Dymo LetraTag-style label makers that accept refills like LT100H, LT100T/LT110 models, QX50, XR, and 2000 series variants. It’s designed to print clearly and stick well to everyday items, including curved surfaces, with a peel-away backing that should leave less residue behind. The main practical catch to watch for is that the backing paper can feel harder to remove for some users.
Pros and cons
Pros
- Made to fit multiple Dymo LetraTag-compatible machines (including LT100H and LT110-family models)
- White plastic tape format (12mm wide, 4m long) for clear, readable labeling
- Emphasis on strong adhesion that holds for longer use, including on curved surfaces
- Designed to be abrasion resistant and removable with reduced sticky residue
Cons
- Backing paper removal can be less convenient than with some refills
- Not a “one size fits all” option, so you’ll want to confirm your exact label maker model supports this refill type
What buyers think
Buyer feedback is broadly positive, with recurring themes focused on fit and day-to-day results. Many users say the tape matches their label maker well and prints cleanly. There is also consistent appreciation for label durability and adhesion, including use cases like folder labeling and organization for home or rental spaces. A smaller amount of feedback points to a usability annoyance around removing the backing paper, suggesting the tape works fine, but the peel process may require a bit more care.
What this tape is (and who it’s for)
This is a 5-pack of compatible Dymo LetraTag refill tape in white plastic, sized at 12mm wide by 4 meters long (commonly referenced as 1/2 inch by 13 feet). It’s intended for Dymo LetraTag label makers that take compatible plastic tape refills in this width class.
Best for: anyone organizing shelves, cabinets, storage bins, kitchen items, bathroom areas, or school supplies who wants durable, legible labels that hold up to normal handling.
Also a good fit for: buyers who care about labels that can be applied neatly to slightly curved surfaces (rather than only flat labels).
Who should avoid: shoppers who are unsure their specific Dymo LetraTag label maker model uses this refill type, or anyone who strongly prefers refills with the easiest backing-peel experience.
Compatibility and fit: the key buying checklist
Before ordering, confirm your label maker model matches the refill style this tape is designed for. It’s marketed as a replacement for several Dymo LetraTag machines and refill families, including models referenced such as LT-100H, LT-100T, LT-110T and LT110t PLUS style devices, as well as QX50, XR, and certain 2000-series variants.
If your device model is not on your compatibility list, treat this as a “check first” purchase, since labeling tapes are highly model-specific.
Performance for everyday labeling
Print quality
Reviewers frequently mention that the tape prints well with clear, easy-to-read output. That matters most when you’re doing lots of repetitive labels (like cabinet contents or folder IDs), because readability directly affects how quickly you can find and maintain organization.
Adhesion and durability
The tape is designed for strong adhesion and long-lasting use. Buyers describe it as sticking reliably, including on use cases that see frequent handling. It’s also framed as plastic and abrasion resistant, which is particularly relevant for labels on storage items, kitchen canisters, or frequently touched surfaces.
Removal and residue
The refill is positioned to be easy to peel off using a split backing, and to avoid sticky residue when removed. Still, user feedback includes at least one note that the backing paper can be difficult to remove, so consider this if you plan to swap labels often or want a very fast, effortless peel.
Pros and cons recap
- Pros: broad LetraTag-style compatibility, clear printing, strong adhesion for everyday organization, durable plastic construction, and reduced-residue removal design.
- Cons: backing paper peel can be less convenient, and buyers must verify exact machine compatibility.
Value: is it worth it?
If you’re looking to refill your LetraTag with a plastic white tape that balances clear print output and solid label staying power, this 5-pack refill format is a practical value play. It’s especially appealing for organization-heavy workflows, where the tape’s durability and adhesion can reduce re-labeling.
If you replace labels frequently and prefer the most effortless backing removal, you may want to compare other refill options in the same 12mm plastic tape category and prioritize the peel/handling experience.
How to get the best results
- Confirm machine model compatibility before you order, especially if your label maker is an older or less common variant.
- Surface prep helps: wipe surfaces clean and dry before applying for better adhesion.
- Take your time with the backing if you want a smoother experience, since some users find the peel step less convenient.
- Use it where durability matters (storage, cabinets, kitchen, bathroom, school labeling) to match the tape’s strengths.
FAQ
Will this work with my Dymo LetraTag label maker?
It’s intended for Dymo LetraTag refill compatibility for several listed models (including LT-100H and certain LT-110-family, QX50, XR, and 2000-series variants). Check that your exact model is compatible with this refill type before purchasing.
What is the tape size?
The tape is 12mm wide by 4m long (1/2 inch by 13 feet), supplied as a 5-pack.
Is the tape durable enough for everyday use?
Buyers commonly describe strong adhesion and good durability for organization tasks like folder labeling and labeling items that get handled regularly.
Does it leave sticky residue when you remove labels?
The refill is designed to peel off with reduced sticky residue. However, at least some buyers report that the backing paper can be difficult to remove, so removal convenience may vary by workflow.
Is it easy to apply to curved surfaces?
It’s marketed for sticking to dry, smooth, and slightly curved surfaces, which can make it useful for labeling storage containers or similar items.
Is this tape a good choice for kitchen and bathroom labeling?
It’s a solid fit for labeling kitchen cabinets, storage items, and bathroom organization, especially when you want durable plastic labels that stay readable and attached during day-to-day use.
Ready to compare or buy? Buy on Amazon
Specifications
| Product Title | Compatible with Dymo Letratag Refills, Plastic White Tape, 12mm X 4m (1/2inch X 13feet), Replacement for Dymo Label Maker Refills for Letra Tag LT100T LT100H QX50 XR, 5 Pack |
|---|---|
| Category | Electronics > Accessories & Supplies > Office Electronics Accessories > Labeling Tapes |
| Brand | Goldenlabel |
| Manufacturer | Goldenlabel |
| Model Number | 17 |
| Color | Black on Plastic White |
| Material | Plastic |
| Size | 12mm |
| Brand Name | Goldenlabel |
| UPC | 748253970571 |
| Unit Count | 1.0 Count |
| Number of Items | 5 |
| Manufacturer Part Number | 17 |
| Finish Type | Adhesive |
| Item Shape | Rectangular |
| Ink Color | Black |
| Number of Labels | 5 |
| Line Size | 12mm |
| Material Type | Plastic |
Available variants
Size
- 12mm
Color
- Black on Paper White
- Black on Plastic White
Recommended next
10Pack TZe-231 Compatible Brother Label Maker Tape 12mm 0.47 White (Black on White)
This 10-pack of 12mm TZe-231 style label tape (black on white) is designed for compatibility with many Brother P-touch machines that use TZ231/TZe-231 cartridges. It’s a value-focused option if you print lots of labels and want long-lasting, laminated durability, with the main caveat being compatibility limits for non-P-touch and Brother M-series style tapes.
Freshworld 6X Compatible for DYMO Label Maker Refills D1 1/2 in 23 Ft White
Freshworld’s 6-pack D1 1/2-inch (45013) white label tape refills are made for DYMO LabelWriter/LabelManager models that accept D1 cartridges. Buyers highlight easy loading, strong adhesion, and crisp print clarity at a lower cost per roll than many OEM options, with the main caveat being compatibility, especially if your specific DYMO model is not listed.
Compatible with Dymo LetraTag Label Maker Refills 91331 Plastic White Tape 12mm x 4m (1/2" x 13'), for Labeler Letra Tag 200B, LT 100T 100H Plus, 5-Pack Label KINGDOM Cartridges
A 5-pack of compatible Dymo LetraTag 91331-style black-on-white plastic labels in 1/2 inch width (12mm) designed for everyday, indoor organization. Buyers like the fit, clear printing, and strong peel-and-apply adhesive, with the main tradeoff being slightly less “solid” tape feel versus official refills.
Brother Genuine TZe231-1/2 2PK Black Print on White Label Tape
Brother Genuine TZe231 black-on-white laminated label tape in a 2-pack (12 mm x 8 m each) for compatible Brother P-touch label makers. Buyers highlight crisp, readable print and durable, laminated results, with the main tradeoff being a backing that can be harder to remove.