Cell Phone Signal Booster for All Carriers on Band 5/12/13/17 | ANNTLENT (N30-PY)
Quick take
This ANNTLENT cell signal booster is designed for carriers that operate on bands 5, 12, 13, and 17, using an outdoor directional antenna plus indoor antenna to help pull a stronger LTE and 5G signal indoors. It can make a clear difference in rural and low-signal locations, but performance is highly dependent on correct band match and antenna aiming, and the installation app experience can be frustrating for some.
Pros and cons
Pros
- Supports bands 5, 12, 13, and 17 (check your local bands before buying).
- Includes an outside directional Yagi-style antenna and indoor panel antenna for targeted coverage.
- Automatic level adjustment (ALC) helps maintain stable operation based on existing signal.
- Buyer reports describe improved bars, fewer disruptions, and usable speeds in weak-signal areas.
Cons
- Coverage estimates depend on outside signal strength, so “up to” area may not match your home.
- Outdoor antenna setup and aiming are the hardest part, and results can disappoint if trees or hills block the path to the tower.
- App assistance for calibration/pointing is reported as unreliable or time-consuming by some users.
What buyers think
Buyer-review evidence is mixed but generally points to one theme: the booster can work well when the installation is done thoughtfully and the local cell bands match what the device supports. Multiple reviews describe meaningful improvements in call stability and signal bars after setting up the outdoor antenna and indoor hardware properly, especially in rural locations. At the same time, a smaller portion of reviews report no indoor improvement when the outdoor antenna could not get an effective view of the serving tower, suggesting that placement and line-of-sight (or at least a workable signal path) matters. Setup difficulty is a recurring topic, with the outside antenna aiming being the most time-consuming step. The companion app is also a recurring frustration for some, even when the hardware itself is otherwise straightforward to assemble.
What this booster is (and what it isn’t)
This is a band-specific, two-antenna booster system built to enhance mobile signal indoors by capturing an outdoor signal with a directional antenna and retransmitting it inside through an indoor antenna. It is not a “universal for every carrier everywhere” booster, so the key buying step is confirming that your area uses bands 5, 12, 13, and 17.
It also does not guarantee full-home coverage. Coverage depends on your starting outdoor signal and on how effectively the outdoor antenna can be aimed to the correct tower direction.
Key specs and features that matter for shopping
Supported bands
The booster supports frequency bands 5, 12, 13, and 17. This is the most important spec for compatibility. If your local network primarily uses different bands, you may not see improvements.
Coverage claim (and why your results may differ)
The system is marketed for large coverage (up to about 4,500 sq ft), but coverage is tied to outside signal strength. In other words, you should think of this as “up to” and plan around your outdoor reception quality.
Outdoor directional antenna and indoor coverage
The included outside directional Yagi-style antenna is meant to focus reception in a specific direction. Inside, a panel antenna rebroadcasts the signal for indoor use. Reviews frequently highlight that outdoor antenna positioning and aiming are decisive for whether you get strong indoor bars.
Automatic level control
The booster includes ALC (automatic level control) that detects existing signal strength and adjusts for best performance, with the goal of preventing inconvenient shutdowns caused by signal mismatch or instability.
What’s included
The kit includes the N30 booster, outside directional antenna, inside panel antenna, window entry cable, power supply, waterproof tape, and several cable lengths (including 16 ft and 33 ft cables), plus cable management tape.
Installation and setup experience
Most of the work comes down to where you place the outdoor antenna and how you aim it. Indoors, the system is generally plug-and-go once the indoor antenna is positioned. Outdoors, you may need to run cable through a window or entry point and mount the antenna securely, then fine-tune direction to maximize outdoor signal without accidentally favoring the wrong tower.
The included app is intended to help locate tower direction, but buyer feedback is not consistent. Some people report the app as difficult or unreliable and rely on alternative tower-location tools and mapping to get a bearing, then aim using signal strength feedback.
Pros and cons for different home situations
Best for
- Rural or mountainous properties where indoor signal is weak (especially when outdoor reception is at least workable).
- Homes where you can mount the outdoor directional antenna at a height that can “see” toward the serving tower area (even if that requires a pole, roof mount, or mounting near the exterior).
- Buyers willing to spend time on antenna aiming, not just quick mounting.
Who should avoid it
- Buyers who skip band verification. If your carrier does not use bands 5, 12, 13, or 17 in your location, you are likely to waste time and effort.
- Homes where the tower path is completely blocked by thick obstacles, and the outdoor antenna cannot pick up a strong directional signal.
- Buyers who want a “no calibration” experience, since antenna aiming and app-based direction help can be inconsistent.
Performance expectations: what reviews suggest
When this booster is a good match, review evidence points to noticeable improvements such as stronger signal bars indoors and fewer call disruptions. Some users also describe the ability to support typical data activities like streaming or browsing. Upload performance appears more limited in some cases, so if your priority is consistently high upload speeds from inside a weak-signal home, your mileage may vary based on tower conditions and the strength of the uplink path.
If the outdoor antenna cannot effectively capture the right signal direction, some buyers report little to no indoor improvement, even with careful installation steps.
Verdict: is it worth buying?
This ANNTLENT cell phone signal booster is worth considering if you confirm band compatibility (bands 5, 12, 13, and 17) and you can mount and aim the outdoor directional antenna in a way that captures a usable outdoor signal. It can be a strong option for rural homes that need help stabilizing calls and improving general connectivity indoors. If you cannot get workable outdoor reception due to obstacles, or you want an effortless setup with minimal aiming, you may be better off exploring a different solution strategy before committing to this one.
Alternatives to consider
- If your area uses different bands: Look for a booster that specifically supports the bands your carrier actually uses locally, rather than switching based on carrier name alone.
- If you need broader indoor distribution across many rooms: Consider a solution approach that emphasizes better indoor antenna placement and coverage strategy, since cable length, indoor placement, and signal decay can limit multi-room performance.
- If app guidance is a deal-breaker: Choose a booster ecosystem where alignment can be done reliably using signal strength feedback and mapping tools, even without relying on app calibration.
FAQs
What carriers will this booster work with?
It’s intended for carriers operating on bands 5, 12, 13, and 17. Instead of relying only on the carrier name, you should confirm which bands your local tower uses.
Do I need to know my cell band before buying?
Yes. This booster is band-specific (5, 12, 13, and 17). If your area uses different bands, you may not get meaningful results.
How much coverage will I get?
The system is marketed for up to about 4,500 sq ft, but real coverage depends on your outside signal strength and how well the outdoor antenna is aimed.
Is setup difficult?
Many steps are straightforward indoors, but the outdoor antenna placement and aiming are commonly the hardest part. Plan time for fine-tuning.
Does the booster work if my outdoor signal is very weak?
It may help if you can still pick up a directional signal outdoors. If the outdoor antenna cannot capture an effective signal path toward the tower, indoor improvement may be limited.
Is the included app helpful?
The app is meant to assist with installation direction, but some buyers report it as unreliable or difficult to use. Be prepared to use other mapping and alignment methods if needed.
Specifications
| Product Title | Cell Phone Signal Booster for All Carriers on Band 5/12/13/17 | Up to 4,500 Sq Ft | Boost 5G 4G& LTE Signal for Verizon, AT&T, T-Mobile & More | FCC Approved |
|---|---|
| Category | Cell Phones & Accessories > Accessories > Signal Boosters |
| Brand | ANNTLENT |
| Manufacturer | ANNTLENT Ltd. |
| Model Number | N30-PY |
| Color | Grey |
| Frequency Band Class | Tri-Band |
| Special Features | APP Help Install, LED Indicator |
| Compatible Devices | Smartphone |
| Frequency Bands Supported | 5,12,13 and 17 |
| Range | 3500 Square Feet |
| Smart Home Compatibility | Not Smart Home Compatible |
| Connector Type | N-type |
| Built-In Media | N30 Booster, Outside Directional Antenna, Inside Panel Antenna, Window Entry Cable, 3 Loger Cables (2 x 16', 1 x 33'), Power Supply, Waterproof Tape, Cable Management Tape |
| Mfr Part Number | AN-CL70VA-01 |
| Unit Count | 1.0 Count |
| Warranty Description | 3 Year Manufacturer |
| Special Feature | APP Help Install, LED Indicator |
| Included Components | N30 Booster, Outside Directional Antenna, Inside Panel Antenna, Window Entry Cable, 3 Loger Cables (2 x 16', 1 x 33'), Power Supply, Waterproof Tape, Cable Management Tape N30 Booster, Outside Directional Antenna, Inside Panel Antenna, Window Entry Cable, 3 Loger Cables (2 x 16', 1 x 33'), Power Supply, Waterproof Tape, Cable Management Tape See more |
Available variants
Color
- Grey
- Black
- Dark Grey
- White
Recommended next
SureCall Flare 3.0 Cell Phone Signal Booster for Home & Office (up to 3500 sq ft)
The SureCall Flare 3.0 is a home-and-office cell signal booster kit built around a directional Yagi-style outdoor antenna and a simple indoor base unit. It can improve weak 4G/LTE and 5G signal when you already have some outdoor signal to work with, but performance depends heavily on antenna placement, exterior signal strength, and proper separation to reduce interference.
weBoost Drive Reach Overland cell phone signal booster
The weBoost Drive Reach Overland is a rugged, off-road-focused booster designed to improve 5G/4G LTE coverage inside an overland vehicle when there’s at least some usable outside signal. It’s carrier-compatible across major U.S. networks and pairs a durable outdoor antenna with a versatile mounting setup, but it won’t create service where none exists, and results vary by carrier and signal conditions.
Diaclara Magnetic Designed for iPhone 17 Pro Max Case Full
The Diaclara Magnetic Designed for iPhone 17 Pro Max case is a full-body, dual-layer bumper style cover with a built-in PET screen protector and MagSafe-compatible magnet ring. It’s positioned for drop protection and everyday durability, but it is not water resistant and some finishes can show dirt more easily.
SureCall Fusion4Home Cell Phone Signal Booster up to 2000 sq ft
The SureCall Fusion4Home is an all-carrier, FCC-approved home signal booster designed to improve call quality and LTE/5G data in small homes and offices. Review themes point to real coverage gains for dead or weak indoor signal, but results depend heavily on outdoor signal and antenna placement, and some buyers report voice failures even when bars improve.