CD Slot Mount for Carplay Screen 17mm Ball Adapter with 4-Button Lock
Quick take
This CD-slot mount is built for portable CarPlay, Android Auto, and similar dash screens that accept a 17mm ball-style connection. It uses a CD tray style installation plus a ball-and-socket joint for wide 360° aiming, and buyers report it can feel very stable once secured. The main catch is compatibility with your CD slot shape and spacing, and in some cars it may block nearby dashboard controls.
Pros and cons
Pros
- Designed for portable 7 to 10.26 inch CarPlay and related displays with a 17mm ball mounting bracket.
- Adjustable viewing angles with a 17mm swivel ball and rotation for dialing in screen position.
- CD-slot style mounting is quick for the right cars, and many buyers describe minimal shake or vibration while driving.
- Includes a mounting bracket, and uses a locking mechanism to help keep the screen steady.
Cons
- Not compatible with curved CD slots, hidden CD slots, or CD slots positioned too close to the shift.
- Depending on your dash layout, the screen placement can interfere with buttons (for example, volume or AUX).
- If you frequently re-aim the screen, some users report the tension/locking hardware may need re-tightening to prevent sag.
What buyers think
Buyer-review evidence is mostly consistent around stability and fitment. Many reports describe a snug fit into the CD tray, straightforward installation, and little to no movement while driving for common CarPlay/Android Auto setups (including several users mounting around similar-size portable screens). Angle adjustment is generally appreciated, especially for getting the screen where it’s easy to see. The main recurring concerns are practical fit, since CD slot layouts vary by vehicle, and hardware tension, with at least some users noting they may need to re-tighten if they adjust the angle often.
What this mount is for
This is a CD-slot dashboard mount intended for portable replacement displays like CarPlay and Android Auto units that connect using a 17mm ball mounting system. If you want a clean alternative to windshield suction cups or adhesive mounts, a CD-slot mount can help keep the screen lower and more integrated into the center stack, as long as your car has a suitable CD tray geometry.
Compatibility and screen fit
Key compatibility points to check before buying:
- Screen size range: meant for portable wireless CarPlay car stereos and similar monitors in the 5 inch to 10.26 inch class (the product also references 7 inch and 9 inch setups).
- Connection type: standard 17mm ball mount. The ball head diameter is listed at about 0.67 inches (17mm).
- Installation requirement: you need a car with a CD player and a compatible CD slot.
- Not compatible with certain CD slots: curved CD slots, hidden CD slots, or a CD slot that is too close to the shift.
Weight capacity is specified at a maximum of 1.5 kg, which should cover many portable screens designed for this kind of bracket connection, but it’s still worth confirming your specific monitor’s weight and mounting requirements.
Angle adjustment and how it feels in use
The mount uses a ball-and-socket style design with a 17mm swivel ball, allowing rotation up to 360° (clockwise and counter-clockwise). Buyers commonly describe the setup as stable once the mount is tightened down, and several mention no noticeable vibration during driving. That said, angle adjustment can involve tensioning parts, so if you frequently move the screen, expect you may need to re-tighten the locking hardware to keep it from gradually sagging.
Pros and cons for specific buyer types
Best for
- Drivers who want a CD-tray mount solution for portable CarPlay/Android Auto screens, especially if suction-cup mounts slide.
- People whose dashboard buttons are not directly in the screen’s reach once installed.
- Shoppers using a 17mm ball-style bracket on their display and looking for a simple way to aim the screen.
Who should avoid it
- Anyone with a curved, hidden, or poorly positioned CD slot (including cases where the slot is too close to the shift).
- Drivers whose CD slot places the screen in front of frequently used controls, making everyday button access annoying.
- Shoppers who plan to constantly re-aim the screen throughout the day, since some users report needing periodic re-tightening to maintain posture.
Alternatives to consider
If your car doesn’t have a compatible CD slot, you may need a different mounting approach. Use these decision criteria to narrow alternatives:
- Suction-cup dash mounts: better for cars without CD trays, but depend on windshield surface and can lose hold over time.
- Vent mounts: usually easy to install, but can affect airflow and may not fit larger portable screens depending on bracket design.
- Adhesive mounts: stable once set, but they are harder to remove or relocate if you change devices.
The key is matching both your screen’s connection (17mm ball in this case) and your car’s mounting surface geometry (compatible CD slot shape and spacing).
Bottom line
The CD Slot Mount for Carplay Screen with the 17mm ball adapter is a solid option if your vehicle has a compatible CD slot and your portable screen supports a 17mm ball mounting head. Buyers tend to like the stable hold and the wide angle adjustment, but fit can make or break the experience, especially if the screen ends up blocking nearby dash buttons. If your CD slot layout is a known match, this is a straightforward way to keep your CarPlay-style screen accessible without relying on suction or adhesive.
FAQs
What screen sizes is this mount compatible with?
It’s intended for portable wireless CarPlay and similar monitors in the 5 inch to 10.26 inch range, with specific references to 7 inch and 9 inch setups. It’s also described as compatible with displays that use a 17mm ball-style mounting connection.
Is this compatible with a 17mm ball mount on my CarPlay screen?
Yes. The mount is built around a standard 17mm ball mounting bracket, with a ball head diameter listed at about 17mm (about 0.67 inches).
Will it fit curved or hidden CD slots?
No. It’s explicitly not compatible with curved CD slots, hidden CD slots, or a CD slot that sits too close to the shift.
Does the screen wobble or shake while driving?
Many buyers describe the mount as snug in the CD tray and steady on the road, with minimal bounce. As with any dash setup, stability depends on proper tightening and fit to your specific car’s CD slot.
What’s the biggest downside to watch for?
Dash layout. Depending on where your CD slot sits, the mounted screen can land in front of controls like volume or AUX, making them harder to reach. Also, frequent angle changes may require re-tightening to prevent sag.
Specifications
| Product Title | CD Slot Mount for Carplay Screen 17mm Ball Adapter with 4-Button Lock Compatible with 7-10.26 Inch Portable Car Play Baby Camera Monitors Cell Phone Replacement Cd Mount |
|---|---|
| Category | Electronics > GPS, Finders & Accessories > GPS System Accessories > Vehicle Mounts |
| Brand | Epronic |
| Manufacturer | Epronic |
| Model Name | CDK |
| Model Number | CDKEU |
| Color | Black |
| Item Weight | 68 Grams |
| Compatible Devices | ★Note: it is not compatible with curved cd slot, hidden cd slot, or cd slot that too close to the shift. |
| Compatible Phone Models | ALL |
| Mounting Type | CD Slot Mount |
| Additional Features | Adjustable / Adhesion |
| Weight Capacity Maximum | 1.5 Kilograms |
| Compatible with Vehicle Type | Car |
| Item Dimensions | 4.53 x 3.35 x 1.81 inches |
| Unit Count | 1.0 Count |
| Mfr Part Number | PSCB-EU0224 |
| Warranty Description | 1 year |
| Built-In Media | Bracket body |
| Enclosure Material | Acrylonitrile Butadiene Styrene |
Available variants
Model
- Z2007EU
- CDKEU
Recommended next
Garmin 010-10908-02 Portable Friction Mount
The Garmin 010-10908-02 is a portable dash friction mount designed to hold compatible Garmin nüvi and StreetPilot devices securely on stable surfaces. It focuses on quick in-and-out mounting, adjustable viewing angles, and a grip-on-dash approach that avoids common windshield suction issues.
RAM Mounts Tough-Claw Mount Cup Holder, Level Cup 16oz Self-Leveling Drink Holder
The RAM-B-132-400U is a compact, tool-less cup holder that uses a self-leveling (two pivot) gimbal to keep drinks upright. It clamps to rails and tubes in a wide range and is designed for outdoor use on bikes, kayaks, boats, and more, with a coozie included.
TUSITA Seat Post Quarter Turn Mount Compatible with Garmin Varia RTL510 RTL515 RVR315, RearVue 820 Rearview
The TUSITA seat post quarter turn mount is a tool-free way to secure a compatible Garmin Varia Rearview radar or tail light to your bike seat post. It uses a quarter-turn style clamp for quick adjustment, includes spacers for multiple seat-post diameters (27.2, 30.9, 31.6 mm), and reviews commonly highlight a secure fit and easy setup. The main caveat is fit, especially if you do not have one of the supported seat-post sizes or if your bike uses a different mounting geometry than a standard seat post.
RAM MOUNTS B Size 1" Double Socket Mount Arm – Medium Composite (RAP-B-201U)
The RAM-B-201U is a medium-length RAM double-socket arm for B size (1-inch) ball-and-socket systems. It gives you flexible positioning with “near-infinite” angle adjustment and quick pivot setup using a spring inside the arm. Best for riders and vehicle setups that need a compact arm length and strong, marine-grade composite construction, with the main caveat that you must build the rest of your mount with compatible B size components.