Car Truck Windshield Super Suction Cup Mount for UNIDEN R8 R7 R4 R3 R1 DFR3 DFR6 DFR7 DFR8 DFR9 Radar Detector
Quick take
This windshield suction cup mount is built for select Uniden radar detector models, using a cradle and adjustable locking mechanism to help keep the detector steady while driving. Buyers tend to like that it holds firmly in heat and cold, but the biggest buying caveat is compatibility, including a clear note that it is not for a specific Uniden model. If you have one of the supported detectors, it can be a practical replacement or upgrade option, especially if you want a cleaner windshield setup.
Pros and cons
Pros
- Designed for a specific set of compatible Uniden radar detectors (cradle fit matters).
- Reusable suction cup intended to hold to the windshield, with guidance to rinse and air-dry to restore suction.
- Adjustable metal slide cradle meant to reduce shake or vibration while driving.
- Setup uses an adjustment knob to lock the detector into position.
Cons
- Strict model compatibility, including an explicit “not compatible” note for one Uniden radar detector model.
- Assembly can be fiddly, with reports that small parts may need to be seated correctly for the mount to function smoothly.
- Review evidence is mixed across use cases, including at least one account of suction failing quickly under specific conditions.
What buyers think
Buyer-review evidence is somewhat mixed, but the recurring decision theme is holding power. Multiple reviews describe the mount staying secure on the windshield through long drives and across hot and cold conditions. Others focus on fit and usability, particularly that the cradle can hold the detector tightly once properly assembled, and that locking and adjustment help prevent movement while driving. There are also a limited number of negative experiences tied to suction strength and the importance of correct setup, but overall review detail suggests the mount performs best when it is matched to the correct radar detector model and installed carefully.
What this mount is for
This is a windshield super suction cup mount made to hold select Uniden radar detectors in a stable cradle. It is meant for drivers who want their detector mounted directly on the windshield, with an adjustable mechanism to position it for visibility and access. The design is centered on fit to certain Uniden models, including multiple R-series and DFR-series units listed as compatible.
Compatibility matters (and it’s not universal)
Before you buy, confirm your exact radar detector model. The mount is intended for specific Uniden models such as R1, R2, R3, R4, R6, R7, R8, and several DFR and LRD models listed on the product details. There is also an explicit incompatibility note stating it is not for a particular Uniden model, so this is not a generic detector mount you can safely assume will work with any Uniden unit.
Design and installation basics
The core hardware includes a reusable suction base for the windshield and a metal slide cradle meant to lock the detector into position. An adjustment screw knob is used to secure the detector placement. If suction performance ever seems weaker, the product guidance recommends rinsing the base under warm water and allowing it to air-dry to restore suction.
Some buyers mention that getting the cradle attachment fully seated can take a bit of attention, including cases where small parts do not stay in place during initial setup. If you’ve had other mounts feel “almost locked” but still allow rotation, it can help to double-check that all included components are correctly positioned before you tighten everything down.
Pros and cons for real-world driving
Best fit for
- Drivers who already own a compatible Uniden radar detector and want a windshield suction mount replacement.
- People who prefer a fixed, adjustable mounting angle rather than relying on looser, less-stable mounting solutions.
- Shoppers in climates with wide temperature swings, since multiple reviews reference performance through hot and cold conditions.
Who should avoid it
- Anyone whose Uniden radar detector model is outside the listed compatible range, especially if you are the “not compatible” model called out in the details.
- Buyers who want a fully universal mount that will fit multiple detector brands or models without careful checking.
- Shoppers who are unwilling to take a few extra minutes during setup to ensure the cradle attachment and locking pieces are properly seated.
Price and availability
The price can vary over time, so check the latest listing for the most current cost and shipping details. If you are replacing an older mount, compare this option against generic suction mounts by factoring in fit, stability, and whether the detector cradle alignment matches your specific Uniden unit.
How to decide if it’s worth it
Consider this mount “worth it” if your priorities are a windshield suction base, a cradle that is built for your detector model, and a locking mechanism designed to limit movement. It is less attractive if you need a universal mount or if you frequently re-mount and remove the detector in a way that could compromise suction performance. As with any suction-based setup, installation matters, including cleaning the windshield area and ensuring the suction cup is in good condition.
FAQ
Will this mount fit any Uniden radar detector?
No. It is designed for select Uniden models listed as compatible, and it includes at least one explicit “not compatible” note. Check your exact model number before buying.
How do I restore the suction if it weakens?
Rinse the suction cup base under warm water, then allow it to air-dry. This is intended to help restore suction performance.
Does the cradle keep the detector from shaking on the road?
The mount uses an adjustable metal slide cradle and a locking knob to secure detector position. Buyer feedback generally supports that it holds tightly once properly assembled and locked.
Is installation difficult?
Installation is designed to be straightforward, using the suction cup and an adjustment knob. However, some users report that small parts during attachment can require careful seating to get everything to lock smoothly.
Where should I mount the detector?
This is a windshield mount, so you should place it in a location that gives you a clear view and convenient access while driving. Clean, dry glass helps suction perform better.
Specifications
| Product Title | Car Truck Windshield Super Suction Cup Mount for UNIDEN R8 R7 R4 R3 R1 DFR3 DFR6 DFR7 DFR8 DFR9 Radar Detector (not for Models not listesd) |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Radar Detectors |
| Brand | ChargerCity |
| Manufacturer | ChargerCity |
| Model Name | ChargerCity Car Truck Windshield Super Suction Cup Mount |
| Model Number | RX3+UN01 |
| Color | Black |
| Item Weight | 0.02 Kilograms |
| Compatible Devices | Uniden R1, R2, R3, R4, DFR3, DFR6, DFR7, DFR8, DFR9 |
| Compatible Phone Models | UNIDEN R8 R7 R6 R5 R4 R3 R1 DFR3 DFR6 DFR7 DFR8 DFR9 Radar Detector |
| Mounting Type | Windshield Super Suction Cup Mount for UNIDEN R1 R2 R3 R4 R7 R8 DFR3 DFR6 DFR7 DFR8 DFR9 Radar Detector |
| Additional Features | Adjustable |
| Water Resistance Level | Water Resistant |
| Compatible with Vehicle Type | Automobile |
| Item Dimensions | 3 x 3 x 3 inches |
| Enclosure Material | R8 Extreme Fitting Cradle |
| UPC | 186589001796 |
| Mfr Part Number | Arkon SM427 |
| Warranty Description | 1 Year Warranty |
Recommended next
UNIDEN R8 Extreme Long-Range Radar/Laser Detector, Dual-Antennas Front & Rear review
The Uniden R8 is a long-range radar/laser detector built around dual antennas with directional arrows, built-in GPS alerts (including red-light and speed-camera databases), and programmable voice announcements. It’s especially compelling for frequent drivers who want fewer repeat false alarms thanks to GPS-based muting and memory features, with a large OLED display for at-a-glance situational awareness.
Uniden R3 EXTREME LONG RANGE Laser/Radar Detector, Record Shattering Performance, Built-in GPS w/ Mute Memory, Voice Alerts, Red Light & Speed Camera Alerts, Multi-Color OLED Display , Black
The Uniden R3 is a long-range laser/radar detector built for daily use, featuring built-in GPS with mute memory, voice alerts, red light & speed camera alerts, and a multi-color OLED display. It’s commonly chosen by first-time buyers who want fewer repetitive alerts and solid detection distance, with the main tradeoff being that you may need time to fine-tune settings for your area.
Uniden R7 Extreme Long-Range Laser-Radar Detector, Built-in GPS w/ Real-Time Alerts
The Uniden R7 is a long-range radar/laser detector built around dual front-and-rear antennas, directional arrows, and a large OLED display. Built-in GPS supports red-light/speed camera alerts plus GPS-based muting of repeat false alerts, but the device isn’t “set it and forget it”, it typically needs tuning for quieter day-to-day use.
Radenso DS1 Extreme Range Radar Detector - Magnet Mount, Bluetooth, Color OLED Display
The Radenso DS1 is a feature-rich radar detector aimed at drivers who want long-range alerts and fewer annoying false alarms. It combines an auto-learning GPS lockout system, a color OLED display with customizable colors, Bluetooth app connectivity, and USB-C power, plus a magnetic quick-release mount.