Callez ear cushions for Plantronics headset replacement ear pads (4 pack)
Quick take
This 4-pack of leatherette ear cushions is built to replace worn earpads on select Plantronics, Jabra, and other standard-size office headsets that match a 50mm mounting spec. Buyers commonly describe the pads as comfortable and good value, and many report the fit is close to OEM once installed. The biggest buying caveat is compatibility, these pads are not for certain headset lines, and fit depends on your exact model.
Pros and cons
Pros
- Leatherette, soft and breathable feel for longer wearing comfort
- No tools required for installation, designed for quick swap-outs
- Includes 4 mic windscreen foam covers (as gifts)
- Comes as a 4-pack, convenient for keeping spares or refreshing multiple headsets
Cons
- Compatibility is model-specific, not a universal replacement for every headset
- Some installations can feel a bit tedious, you may need patience to stretch and seat the pads
- Not intended for certain Jabra Evolve and Evolve2 series models
What buyers think
Buyer-review evidence focuses on comfort, fit, and how straightforward the replacements are to install. Many shoppers report the ear cushions restore comfort and look closer to the original parts, especially when the headset model is actually compatible. Fit feedback is generally positive, with some noting the pad may require stretching to seat properly. Installation time is also mentioned, most report it is workable but not always instantaneous.
What these ear cushions are for
These are replacement ear pads designed for office headsets that use a specific cushion size and mounting diameter. They are meant to refresh headsets where the original pads have hardened, flaked, or simply stopped feeling comfortable. If you use a compatible Plantronics or Jabra work headset, these pads are positioned as a simple way to extend the practical life of your existing headset rather than replacing the full headset unit.
Size and fit you should verify before ordering
To avoid a mismatch, check the cushion dimensions and your headset’s pad mounting spec. This set lists:
- Overall diameter: 50mm (1.97 inches)
- Mounting diameter: 35mm (1.38 inches)
- Thickness: 15mm (0.60 inches)
Review themes also suggest fit improves when your headset model is on the supported compatibility list, because the cushions are not positioned as a one-size-fits-all option.
Compatibility notes (important)
These replacement ear cushions are compatible with some specific headset models from Plantronics, Jabra, and several other office headset lines that match the stated specs. They explicitly note exclusions for certain Jabra Evolve models and the Evolve2 series, so double-check compatibility if your headset is from those lines.
If you do not see your exact model in the compatibility list, the safer approach is to message the seller for a compatibility guide before purchasing.
Comfort and material feel
The cushions use leatherette and are described as soft and breathable, aimed at all-day comfort for calling. Buyers commonly mention comfort improvements after replacing worn pads, and some also comment that the replacements look like they belong on the headset, which matters for everyday office use.
Installation and daily usability
Installation is described as tool-free. Practically, the cushions are designed to stretch and seat over the headset’s ear loop area, then rotate firmly so they sit securely. Some shoppers find the process slightly tedious at first, but once installed, the pads are described as soft and stable for regular use.
Each pack includes 4 ear cushions and 4 mic windscreen foam covers included as gifts, which can help you refresh both the ear-contact comfort and the mic area together.
Pros and cons in plain terms
Good fit if you want
- Replacement ear pads for a compatible office headset model
- A comfortable leatherette feel for long call sessions
- A convenient kit that also includes mic windscreen foam covers
Less ideal if
- You need truly universal compatibility across many headset brands
- Your headset is from excluded model families (including certain Jabra Evolve and Evolve2 lines)
- You strongly prefer “instant” installation with no stretching or seating adjustment
Verdict
If your headset model matches the listed Plantronics, Jabra, or supported standard-size spec, these Callez ear cushions are a straightforward comfort upgrade. The strongest reasons to buy are the soft leatherette design, tool-free swap approach, and the inclusion of mic windscreen foam covers. If you are unsure about compatibility, do that quick model check first, because the product is not intended for every headset.
FAQ
Are these ear cushions universal for any headset?
No. They are compatible with select headset models and rely on a specific cushion size and mounting diameter. Confirm your exact headset model and the 50mm spec before buying.
What size are the ear pads in this 4-pack?
The set lists an overall diameter of 50mm (1.97 inches), a mounting diameter of 35mm (1.38 inches), and a thickness of 15mm (0.60 inches).
Do they include mic windscreen foam covers?
Yes. The kit includes 4 ear pads and 4 mic windscreen foam covers included as gifts.
How hard is the installation?
Installation is designed to be tool-free, but it may take a few minutes and some stretching and seating effort to get the pads fully set and secure.
Do these work with Jabra Evolve or Evolve2 headsets?
They explicitly state they are not for Jabra Evolve 20/30/40/65/75 and the Evolve2 series. Check compatibility for your specific model.
How can I confirm compatibility if my exact model is not listed?
If your model is not clearly included, reach out for a compatibility guide before ordering, since fit depends on the headset’s specific design and pad mounting.
Specifications
| Product Title | Ear Cushions for Plantronics Headset Replacement Ear Pads Compatible with Plantronics HW251N HW261N HW510 HW520 Blackwire C320 3210 3220 3320 Jabra Biz 1500 GN2000 PRO 920 9450 Headphones (4 Pack) |
|---|---|
| Category | Electronics > Headphones, Earbuds & Accessories > Earpads |
| Brand | Callez |
| Manufacturer | Callez |
| Model Name | WE06-4P |
| Model Number | WE06-4P |
| Form Factor | Over Ear |
| Connectivity Technology | Wired |
| Noise Control | None |
| Item Weight | 0.1 Ounces |
| Color | Black |
| Brand Name | Callez |
| Built-In Media | Ear Cushions |
| Age Range Description | Adult |
| Warranty Description | 45 days free replacement and 12 months warranty. Any questions please contact with us via Email:[email protected], we're glad to serve you all the time. |
| Number of Items | 4 |
| UPC | 796914367246 |
| External Testing Certification | Não aplicável |
| Style Name | Minimalist |
| Control Method | Push Button |
| Enclosure Material | Leather |
| Specific Uses For Product | Calling |
| Antenna Location | Calling |
| Compatible Devices | Headphones |
| Cable Features | Retractable |
| Water Resistance Level | Not Water Resistant |
| Additional Features | Sweatproof |
Recommended next
SoloWIT Replacement Earpads Cushions for Bose QuietComfort 35 (QC35) & Quiet Comfort 35 II (QC35 II)
SoloWIT replacement earpads are designed specifically for Bose QC35 and QC35 II headphones, aiming to restore comfort and a better seal for improved noise isolation. Buyers highlight a close fit, softer “protein leather” feel, and straightforward installation, with durability that varies by use.
3 Pairs Replacement Ear Tips for AirPods Pro and 2nd Generation with Noise Reduction Hole, Silicone Ear Tips for AirPods Pro with Portable Storage Box and Fits in Charging Case (S/M/L, Black)
These YUWAKAYI silicone ear tips are designed as a drop-in replacement for AirPods Pro (1st gen and 2nd gen), aiming to restore a close seal for comfort and sound isolation. The standout detail is a dual noise reduction hole design plus a dust-guard screen, and the set includes S/M/L tips with a portable storage box that fits the charging case.
Meenova Original A2083 Right Earbud Replacement for Air Pro 1st review
This Meenova A2083 right earbud replacement is designed to restore one lost or not-working AirPods Pro 1st generation earbud when used with the compatible OEM-style charging case (A2190). It’s a good fit if you want a simple one-side swap, but pairing can take patience, and it is not compatible with AirPods Pro 2nd generation cases or other earbud model numbers.
Comply TrueGrip MAX Premium Memory Foam Replacement Earbud Tips for Apple AirPods Pro 1 & 2 (Black, Medium)
Comply TrueGrip MAX memory-foam ear tips are designed as a replacement for Apple AirPods Pro (1st and 2nd gen) to improve comfort, help form a stronger seal, and reduce outside noise. They are latex-free, come in a Medium size (1 pair), and include care guidance to help the foam last. The main tradeoff: foam tips tend to need more size experimentation and can wear down sooner than silicone if you handle them loosely or use them heavily.