BRCOVAN 1'' Ball Mount Base with Aluminum Alloy 4-Hole AMPS
Quick take
This BRCOVAN 1-inch ball mount base combines a CNC-machined 6061-T6 aluminum AMPS plate with a TPU over-molded 1-inch ball head, built for stable connections with RAM-style B-size 1-inch ball double-socket arms. It is a good fit for powering up tablet, GPS, phone, or accessory setups where you want a secure, non-slip ball interface. The main caveat is compatibility, make sure your arms (and any ecosystem like RAM-style kits) are for the 1-inch ball size.
Pros and cons
Pros
- 6061-T6 aluminum 4-hole AMPS plate with a hard anodized finish for durability.
- TPU over-molded ball head designed to be non-slip and wear-resistant.
- Stable, low-wobble fit reported by buyers when used as part of a mounting system.
- Works across vehicle types like car, truck, boat, ATV/UTV, and motorcycle.
Cons
- Ball size matters, it is built around a B-size 1-inch ball and RAM-style 1-inch ball arms.
- It is a base only, you will still need the right arm and device cradle for your setup.
- Buyer feedback on long-range load limits is limited, so heavier setups may need careful arm sizing.
What buyers think
Buyer-review evidence highlights three consistent themes: build quality, stability, and practical fit with existing RAM-style or similar systems. Many reviews describe the aluminum plate as solid and well-made, and they note that the mount secures cleanly with little to no wobble when installed as intended. Several buyers also call out compatibility in real-world builds, especially when pairing the base with shorter or correctly sized arms for tablets, GPS units, or other devices. Overall, buyer sentiment suggests this base performs best when it matches the correct 1-inch ball ecosystem components and when arm length and device weight are considered.
What is this mount base and how it fits your gear
This is a ball mount base designed to integrate into a RAM-style mounting ecosystem. The package combines a 2-inch x 1.69-inch square plate with a four-hole AMPS pattern and a B-size 1-inch ball head. That ball head is TPU over-molded to help with grip and wear resistance at the ball interface, while the aluminum plate provides a rigid anchor point to bolt into a dash, panel, or similar surface.
Key specifications that matter for buying
- Plate and drilling pattern: 4-hole AMPS pattern on a CNC-machined square plate (2" x 1.69").
- Materials: 6061-T6 aluminum plate with a hard anodized surface, paired with a TPU over-molded ball head.
- Ball size and compatibility: Designed for B-size 1-inch ball double-socket arms (RAM Mounts B compatible, and BRCOVAN any B-size 1-inch ball double socket arm).
- Use cases: Intended for vehicle installations including cars, trucks, boats, ATVs, UTVs, and motorcycles.
- Weather handling: Listed as waterproof.
Pros and cons for real-world setups
Best for
- RAM-style buyers who already use 1-inch ball double-socket arms and want a matching base plate.
- Dash and panel installs where you want a compact AMPS base you can bolt down securely.
- Device mounts for GPS, phones, tablets, or similar accessories that use a ball-and-socket system.
Who should be careful
- If you are unsure about ball size, verify you need a B-size 1-inch ball. A smaller ball system will not couple correctly.
- If you plan a long-reach arm with a heavier tablet or multiple devices, arm length and weight distribution become more important, and you may need to size the rest of the system accordingly.
- If you just need a plate mount without a ball interface, consider other AMPS-only mounts, because this one is specifically for the ball ecosystem.
Installation and compatibility tips
Because this is a base, successful results depend on pairing it with the correct arm and mounting pattern. Before you buy, confirm two things: (1) your arm is a B-size 1-inch ball double socket type, and (2) your planned mounting surface supports the 4-hole AMPS bolt pattern. If you are adapting an existing build, check whether your other RAM-style bases and arms are using the same 1-inch ball standard so your assembly stays snug at the joint.
Value: is it worth it?
With a 6061-T6 aluminum plate and a TPU over-molded ball head, this base is positioned as a durable, rigid anchor point for ball-and-socket mounting setups. It tends to make sense when you already plan to use a 1-inch ball double-socket arm, because then you are getting the key interface and the AMPS bolt base in one component. The value drops if you discover your system uses a different ball size or expects an AMPS plate that does not match the 4-hole pattern.
Alternatives to consider
- AMPS-only mounts (no ball interface): Better if you do not need multi-angle adjustments and want a simpler, fixed position.
- Different ball sizes: If your existing arms use a smaller or larger ball standard, switching to the matching size base can prevent fit issues and reduce wobble at the joint.
- Complete kit bundles: If you are starting from scratch, a full mount kit that includes arm and device cradle can reduce compatibility mistakes compared to mixing individual parts.
Verdict
The BRCOVAN 1-inch ball mount base is a strong choice for buyers building or upgrading a RAM-style mounting setup around B-size 1-inch ball double-socket arms. Its aluminum AMPS plate and TPU over-molded ball head are aimed at long-term durability and a stable connection. Just double-check compatibility and consider how arm length and device weight affect how solid your final tablet or GPS setup feels.
FAQs
Frequently asked questions
Is this base compatible with RAM Mounts?It is designed to be compatible with RAM-style B-size 1-inch ball double-socket arms.
What mounting pattern does it use?It uses a 4-hole AMPS pattern on a square plate.
Is it just the base or a complete mount?It is a base component. You still need the appropriate ball arm and device cradle for your specific accessory.
Will it work for tablets and GPS devices?It is intended for device mounts that use the ball-and-socket ecosystem and pair with the correct 1-inch ball double-socket arm.
Does it hold up outdoors?It is listed as waterproof, with a hard anodized aluminum finish intended for durability in demanding conditions.
Ready to compare your compatibility and lock in your setup? Buy on Amazon
Specifications
| Product Title | BRCOVAN 1'' Ball Mount Base with Aluminum Alloy 4-Hole AMPS Square Plate | Compatible with RAM Mounts B Size 1 Inch Ball Double Socket Arm |
|---|---|
| Category | Automotive > Motorcycle & Powersports > Accessories > Electronics > Electrical Device Mounts |
| Brand | BRCOVAN |
| Manufacturer | BRCOVAN |
| Model Name | 1'' Ball Mount |
| Model Number | R6-1-1PACK |
| Color | Black |
| Item Weight | 0.06 Kilograms |
| Compatible Devices | Compatible with RAM Mounts B size 1'' ball double socket arm |
| Compatible Phone Models | Compatible with RAM Mounts and BRCOVAN Any B Size 1 inch Ball Double Socket Arm |
| Mounting Type | 4-Hole AMPS / Drill Base |
| Additional Features | 4-Hole AMPS, B Size 1 Inch Ball Joint |
| Water Resistance Level | Waterproof |
| Compatible with Vehicle Type | Car, Truck, Boat, ATV, UTV, Motorcycle |
| Shape | Square |
| Mfr Part Number | R6-1-1PACK |
| Warranty Description | 1 Year |
| Enclosure Material | 6061-T6 aluminum alloy square plate base, TPU over-molded ball head |
Recommended next
Roam Universal Black Net Bike Phone Mount Holder, 360° Rotation
The Roam Universal net phone mount is a tool-free handlebar mount designed for phones up to about 3.6 in wide, with a 360-degree ball-socket style rotation for landscape or portrait GPS viewing. It’s a solid pick for cyclists and riders who want full phone access and reduced vibration on rough roads, with the main caveat being that bulky/wallet cases may prevent the included corner supports from reaching properly.
Lamicall Bike Phone Holder Mount
The Lamicall bike phone holder mount is a lockable, rotating handlebar clamp designed for 4.7 to 6.8-inch phones. Buyers like the sturdy grip and one-hand operation, but thicker cases can interfere with the fit and may require removing the phone from the case to get a secure hold.
BRCOVAN Aluminum Alloy Handlebar Mount Base with 1'' TPU Ball
The BRCOVAN 1-inch ball handlebar mount base is a compact, 6061-T6 aluminum and TPU-overmold option for RAM-style B-size 1-inch ball accessories. It uses interchangeable rubber ring inserts and a lock-bolt approach to clamp securely on round bars, with mixed feedback on vibration resistance that may require periodic re-tightening.
Lamicall Bike Phone Holder, Motorcycle Mount
The Lamicall bike and motorcycle phone holder is a clamp-style handlebar mount designed for 4.7 to 6.8-inch smartphones (up to 15mm thick, including most cases). It’s built around a corner-grip design with silicone pads, plus a red rear lock for added security on bumpy rides. The main caveat is fit, especially if your phone plus case is near the maximum thickness.