BOSS Audio Systems MRANT12 Marine Rubber Antenna Compatible with Marine Receivers
Quick take
The BOSS Audio Systems MRANT12 is a weather-resistant rubber ducky style marine antenna meant for use with marine receivers. Buyers generally describe it as a practical, low-fuss upgrade or replacement for boats and custom installs, with solid reception feedback. The main buying caveat is to confirm base compatibility, since at least some setups require attention to what’s included.
Pros and cons
Pros
- Weather-proof, rubber “ducky” style design aimed at marine use.
- Commonly used for custom installations, with buyers reporting strong reception and minimal interference.
- Flexible rubber construction helps with corrosion resistance and a cleaner look.
- Universal-style marine radio antenna for receiver-based setups.
Cons
- It can be a replacement antenna, so base/included hardware may not match every installation.
- Some buyers note small hardware-fit details (like pivot screw length), which may require minor adjustment for best tightening.
- It’s designed for a typical receiver antenna application, so it may not be ideal if you need a different mounting style or antenna type.
What buyers think
Buyer-review evidence points to a generally positive experience centered on practicality and reception. Multiple buyers describe the MRANT12 as working well after installation, including custom setups where they mounted the antenna through a roof or positioned it under boat hardware. Rubber construction is a recurring theme, with feedback that it looks good, resists wear better than exposed metal styles, and is easier to work with during install and travel. Some review detail also suggests the antenna may be sold as a replacement component rather than a full assembly, and that a couple of installs needed attention to small mounting hardware or included parts fit. Overall, the review pattern supports the idea that this is a straightforward, budget-leaning marine antenna that prioritizes weather resistance and install flexibility over specialized performance features.
What the MRANT12 is, and how it fits marine setups
The MRANT12 is a marine rubber antenna in a ducky form factor, designed to pair with marine receivers. With an impedance of 50 ohms and a radio-focused antenna design, it’s meant for typical marine receiver antenna applications where you want something that is weather-resistant, compact, and easy to route or mount without a long whip.
Design and build: why the rubber ducky style matters
- Weather-resistant rubber construction: The rubber housing is intended to handle outdoor conditions more gracefully than bare metal antenna styles, helping it stay presentable over time.
- Flexible, low-profile look: Buyers frequently mention liking the rubber form factor for custom installs, including mounting through roof surfaces or keeping the antenna out of sight.
- Adjustability at the mount: The antenna design allows for positioning adjustments (for example, loosening to re-angle), which can help with routing and fit in tighter spaces.
Installation considerations before you buy
This is where the MRANT12 can make or break your experience, depending on your current setup. Review evidence includes one important caution: the product may function as a replacement antenna rather than including a full base for every mount style. Before ordering, check:
- Whether your current base is compatible with this antenna’s connection and mounting method.
- Mounting clearance and hardware length for your roof or panel thickness. Some installs may require minor hardware adjustments to avoid stripping or to achieve a proper tight fit.
- Where you will route the cable so the antenna angle works for your deck or roof layout.
Reception and everyday performance
Across buyer feedback, reception performance is described as working well, including installs where the antenna was used in a camper and in a boat setting. Several buyers also mention no obvious static or interference after installation. That said, antenna performance can vary based on placement, receiver sensitivity, and local conditions, so the best results usually come from mounting in a position that matches your existing setup’s expectations.
Pros and cons summary
If you want a marine rubber ducky antenna that blends into outdoor setups, holds up visually better than exposed metal styles, and is relatively straightforward to install, the MRANT12 fits the use case. If your priority is a fully bundled replacement kit with guaranteed base compatibility, you should double-check that what you’re replacing matches what you’re buying, since some buyers report base-related surprises.
Who should buy the MRANT12
- Boat owners or marine users who want a compact, rubber antenna for a marine receiver.
- DIY installers doing a custom panel or roof mount and prefer a flexible, weather-friendly antenna shape.
- Buyers replacing an existing rubber ducky-style marine antenna who already have a base or compatible mounting setup.
Who should avoid it
- Shoppers who need a complete, base-included antenna kit and cannot confirm compatibility with their current mount.
- People looking for a very specific antenna type or mounting system outside the typical marine receiver rubber antenna category.
Verdict
The BOSS MRANT12 is a solid budget-minded marine rubber antenna choice for most receiver-based setups, with buyer feedback emphasizing workable reception and practical installation in real-world projects. The main thing to verify is that it matches your installation requirements, especially if you are expecting a full base assembly rather than a replacement antenna.
FAQs
Is the MRANT12 compatible with marine receivers?
It’s designed for use as a marine radio antenna with marine receivers, with a 50 ohm impedance rating intended for typical receiver antenna applications.
Does the MRANT12 come with a base?
Some buyers indicate it may be sold as a replacement antenna and not as a complete kit with a base. If your installation requires a specific base, verify compatibility before purchasing.
Is this antenna weather resistant?
Yes. It’s described as a weather-proof marine rubber antenna, built for outdoor conditions.
How hard is it to install on a boat or camper?
Many buyers describe successful custom installs. However, fit and hardware details can vary by mounting location and panel thickness, so it helps to plan for secure tightening and cable routing.
Will it work well if I mount it in an out-of-the-way spot?
Buyer feedback includes installs where the antenna was positioned out of sight on a boat and still worked well. Best results usually come from mounting placement that matches your receiver’s needs and minimizes signal obstructions.
Specifications
| Product Title | BOSS Audio Systems MRANT12 Marine Rubber Antenna Compatible with Marine Receivers |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Marine Electronics > Marine Antennas |
| Brand | BOSS Audio Systems |
| Manufacturer | Boss Audio |
| Model Number | MRANT12 |
| Color | Black |
| Item Weight | 0.35 Pounds |
| Product Dimensions | 20"L x 3"W x 20"H |
| AntennaDescription | Radio |
| UPC | 163120502486 999998497858 182682353794 808112382676 601000755725 151903367339 001910647859 779421301057 757139873790 070071264083 014444733899 826713763755 012301393576 014444953747 807031754120 012951682945 001910027378 523161277918 732233429432 666670148451 601000394184 796793725502 088022139403 680808236612 701002645779 168141276026 041114405749 809386472773 137189551662 123848643120 088022253499 088037966421 115970706354 041114900701 791489310468 809187121917 033173092831 808112566991 806293553496 885417265767 999993760377 100177403625 767887443329 971475303166 031111198140 999994335857 015568996023 100010960643 611105163523 088021712355 983151513554 999994342701 887185890578 053786366754 872182698227 755034030584 755034039532 071030153363 |
| Global Trade Identification Number | 00041114900701, 00791489310468 |
| Number of Items | 1 |
| Mfr Part Number | MRANT12 |
| Built-In Media | BOSS AUDIO |
| Warranty Description | Manufacturer Warranty |
| Item Type Name | ANTENNA |
| Unit Count | 1.0 Count |
| Number of Channels | 1 |
| Impedance | 50 Ohms |
| Item Dimensions L x W x H | 20"L x 3"W x 20"H |
| Antenna | Radio |
Recommended next
Shakespeare 5206-N 8' VHF Antenna
The Shakespeare 5206-N 8' VHF antenna is designed for marine VHF radio setups where reliable range and straightforward installation matter. Buyers frequently describe solid performance after install, confident radio checks at distance, and a build quality that holds up over years.
Shakespeare 4' Centennial VHF Antenna, White
The Shakespeare 4' Centennial VHF Antenna (model 5104) is a compact, 50-ohm marine VHF antenna designed for boats that need a shorter mast height for bridge clearance. Buyers generally report solid reception for near-range use and a generally straightforward install, with the main caveat being that the connector work can be a bit fiddly depending on how you prefer to terminate coax.
Tram® Pretuned VHF 3-dBd-Gain Marine Rachet-Mount 46-in. Fiberglass Antenna with RG58 Cable and FME-Female Connector with PL-259 Adapter
The Tram 46-inch pretuned VHF marine antenna is designed for dependable, across-the-marine-band coverage, with a 3 dBd gain fiberglass element and a nylon ratchet mount that can lower for storage or low-bridge situations. It’s a practical choice for buyers who want an easier install with included stainless hardware, a 20 ft RG58 run, and connectors that aim to simplify small-hole routing.
Tram 1600-HC Pretuned 35-Inch VHF Fiberglass Antenna with RG58 Cable and PL-259 Connectors
The Tram 1600-HC is a pretuned, fiberglass marine VHF antenna built around a low-profile, bottom-loaded coil and a 35-inch stainless steel whip. It’s designed for marine-band listening and communication across VHF frequencies, and it ships with RG58 coax plus PL-259 connectors to simplify installation for many boat setups.