BonFook HiBloks USB C to AR Glasses Hub and Charging Adapter
Quick take
The BonFook HiBloks USB-C hub is built for users who want to output video and audio to compatible AR glasses while charging their host device at the same time. It supports up to 4K60Hz video over USB-C DisplayPort Alternate Mode and includes 65W fast-charging support (with the right PD charger). The main caveat is compatibility and setup, because some users report needing firmware updates and careful USB-C cable orientation.
Pros and cons
Pros
- Charge and play setup: designed to power the host while transmitting to AR glasses.
- Up to 4K60Hz video: targets smooth simultaneous video and audio output.
- Supports DP Alt Mode over USB-C: works with devices that can output DisplayPort via USB-C.
- Compact, durable build: frosted aluminum alloy shell with a protective silicone cover.
Cons
- Not every USB-C port works: your device must support USB-C DP Alt Mode for video output.
- May require firmware or setup tweaks: some buyers report it does not work immediately and needs updates and specific cable connection behavior.
- Charging requires adequate PD wattage: the hub calls for at least a ~45W PD adapter for Switch 1 and Switch 2 class use cases.
What buyers think
Buyer-review evidence is limited but points to a few practical themes. Many users highlight that the hub works well for Switch 2 and Steam Deck-style “plug in and output” scenarios, including charging while routing the display. Setup can be smoother after firmware or correct connection orientation, as a subset of buyers report initial non-working behavior that resolved after updating firmware and paying attention to how the USB-C connection is made. Overall, the feedback is most consistent around compatibility with Switch 2, and a handful of reports suggest support can depend on the current device software version.
What this hub is for
This adapter is meant to solve a specific workflow: you connect your AR glasses to a USB-C device that supports DisplayPort Alternate Mode, then you also keep the host powered while you play or watch. The product is positioned as a “2-in-1” approach, combining video/audio transmission with charging through a single hub.
Key specs that matter for buying
Video and audio transmission
The hub is designed for DisplayPort Alternate Mode over USB-C, with supported output up to 3840×2160 at 60Hz and 1920×1080 at 60Hz. It aims to keep video and audio synchronized for gaming and media use.
Charging while you use it
It supports fast charging up to 65W (performance depends on using a suitable PD charger). The connection concept is “simultaneous,” meaning the hub can transmit to the glasses while charging the host device, helping avoid the common “AR glasses drain the console battery” problem.
Power requirements and cable realities
The hub includes power input profiles compatible with common PD voltages. For certain handheld consoles like Switch 1 and Switch 2 class devices, it specifically calls out needing a 45W or higher PD adapter. If you plan to rely on weaker charging bricks, expect reduced charging performance.
Compatibility: when it should work, and when to double-check
This hub can be a great match if you have a setup that already supports USB-C DP Alt Mode. If your device only supports charging or data over USB-C but does not output DisplayPort signals, the hub will not be able to send the display to your AR glasses.
Switch 2 is a commonly referenced use case, and buyers also report success with Steam Deck-style workflows. AR glasses compatibility depends on whether the glasses require DP mode to be enabled, and some users report changes in behavior after updates to the host device. Translation for shopping: before buying, confirm your host device can output DP Alt Mode over USB-C, then verify that your glasses can accept DP signal input.
Pros and cons in plain language
Best for
- Switch 2 owners (and other DP Alt Mode USB-C devices) who want video output to AR glasses without losing all-day runtime.
- Users who already have a compatible AR glasses model that can work with DisplayPort input.
- People who want one compact hub rather than juggling separate cables or an external power solution.
Who should avoid it
- Anyone whose USB-C port does not support DP Alt Mode.
- Buyers who want guaranteed out-of-the-box behavior across all host software versions, since some reviews indicate firmware and setup tweaks may be needed.
- Users planning to charge from a low-watt USB-C charger, because the hub expects sufficient PD wattage for the charging mode it targets.
Setup tips to reduce frustration
- Confirm DP Alt Mode support on the host device before you connect anything.
- Use an adequate PD charger for your console class (the product guidance calls for at least 45W for Switch 1 and Switch 2 usage).
- If it does not work immediately, be prepared to try a firmware update path for Switch 2 style compatibility and pay attention to how the USB-C connection is made. Some buyers report that cable orientation matters.
Is it worth it?
It is worth considering if your priority is one-hub “charge and play” for a compatible USB-C DP Alt Mode setup, especially for Switch 2 users. If you are uncertain about DP Alt Mode support, or you are buying for a host device and glasses combo where DP mode requirements and firmware state are unknown, you may run into the same sort of setup friction that appears in a smaller portion of reviews.
If you are shopping in the video glasses accessory space, focus your comparison on three things: (1) whether your host supports DP Alt Mode over USB-C, (2) whether you need simultaneous charging, and (3) whether you have a high-watt PD charger available.
FAQ
Does the BonFook HiBloks hub work with any USB-C port?
No. It is designed for USB-C devices that support DisplayPort Alternate Mode (DP Alt Mode) so the hub can transmit video and audio to compatible AR glasses.
What video quality and refresh rate does it support?
It supports video output up to 4K (3840×2160) at 60Hz, and also supports 1080p at 60Hz.
Does it charge the console while displaying to AR glasses?
Yes. The hub is designed for simultaneous transmission and charging, helping you keep the host powered during use.
What charger do I need for fast charging?
The hub targets up to 65W, but for Switch 1 and Switch 2 usage it calls for a 45W or higher PD charger. Using a lower-watt charger can reduce charging performance.
Will it work with Switch 2 right away?
Some buyers report it works without updates, but others report needing firmware updates and careful connection steps to get it working. Compatibility can also be influenced by the current host software version.
How do I know my AR glasses will be compatible?
Check that your glasses support DisplayPort input and that they can use DP mode when connected. Also confirm your host device supports USB-C DP Alt Mode.
Specifications
| Product Title | BonFook HiBloks USB C to AR Glasses Hub and Charging Adapter, Charge and Play Adapter with 4K60Hz and 65W Fast Charging for Switch 1&2/Rokid/Xreal/RayNeo/VITURE/iPhone 15&16 |
|---|---|
| Category | Electronics > Television & Video > Video Glasses |
| Brand | BonFook |
| Manufacturer | BonFook |
| Model Number | BFK AR HUB2 |
| Color | Silver |
| Compatible Devices | Gaming Console，Laptop, Mobile Phone (Devices Support USB-C DP Alt Mode) |
| Connector Type | USB Type C |
| Number of Ports | 3 |
| Input Voltage | 20 Volts (DC) |
| Current Rating | 3.25 Amps |
| Power Plug Type | Type C |
| Smart Home Compatibility | Not Smart Home Compatible |
| Item Dimensions | 2.3 x 1.5 x 0.39 inches |
| Unit Count | 1.0 Count |
| Number of Items | 1 |
| Warranty Description | 1 Year |
| Item dimensions L x W x H | 2.3 x 1.5 x 0.39 inches |
Recommended next
XREAL 1S AR/XR Glasses, 500" Virtual Screen Smart Glasses with 52° FOV, Native 3DoF, REAL 3D, Powered by X1 Chip
XREAL 1S turns a USB-C DP display into a large 500-inch-style virtual screen you can lock (3DoF) or follow your eyes (follow mode), with multiple viewing modes including Ultrawide and REAL 3D. It is built for plug-and-play use on compatible USB-C DP devices, but the “big screen” effect is subjective and you will want the right lighting and expectations for comfort.
VITURE Pro XR/AR Glasses, 135" 120Hz 1000Nits Display, Harman Audio,Electrochromic Film,Myopia Adjustments,for iPhone 17/16/15/Android/Mac/PC/Steam Deck-Used Like New
VITURE Pro XR glasses aim to turn compatible phones and computers into a large, bright private display with edge-to-edge clarity, Harman-tuned audio, and electrochromic tint control. They are a strong fit for mobile gaming, media, and travel viewing, but the experience can depend heavily on device video output support and your IPD range for the best edge performance.
VITURE Luma Ultra AR Glasses, 152'', Full 6DoF Support, AR review
VITURE Luma Ultra AR glasses aim to deliver a bright, sharp, cinema-like virtual display with 6DoF tracking, hand gestures, and a real-time 2D-to-3D mode. They’re best for buyers who want a premium “virtual screen” experience on compatible iPhone, Mac, or PC setups, and who are okay with a more limited app and device ecosystem. If you need flawless 3D performance and consistent behavior across every device platform, buyer-review evidence suggests you should approach with caution.
XREAL One Pro AR Glasses with X1 Chip, Native 3 DoF
XREAL One Pro AR glasses turn a compatible USB-C device into a large, high-refresh virtual display with native 3DoF tracking and (optionally) 6DoF spatial anchoring for a more stable “screen in your space” feel. They’re best for portable entertainment and gaming on devices like Steam Deck, but the experience may be less forgiving for desktop work, active multitasking, and buyers who need the tightest comfort for long sessions.