Bingfu Dual Band WiFi 2.4GHz 5GHz 5.8GHz 9dBi Magnetic Base MIMO RP-SMA Male Antenna 4-Pack
Quick take
This 4-pack of dual-band WiFi antennas is designed to help you reposition antennas with a magnetic base and a long 3m RG174 coax cable. It targets setups that use RP-SMA male connectors and supports 2.4GHz plus 5GHz/5.8GHz bands, making it a practical choice for routers, APs, and some IP security camera and wireless video use cases. The main catch is that antenna upgrades do not automatically translate into faster speeds everywhere, so compatibility and placement matter a lot.
Pros and cons
Pros
- Magnetic base mount for easier placement than fixed router antennas.
- Dual-band coverage (2.4GHz and 5GHz/5.8GHz) with specified omni-directional design.
- 3m RG174 coax to move antennas where signal can be better.
- RP-SMA male connector option suited to compatible routers, APs, and WiFi adapters.
Cons
- Compatibility is critical: it is RP-SMA male (with a connector-center hole and no pin), not standard SMA.
- Real-world range gains are inconsistent across different home layouts and device combinations, with some buyers seeing limited improvement.
What buyers think
Buyer-review evidence is mixed, but a few practical themes show up around installation flexibility and whether performance improves versus stock antennas.
- Setup and placement flexibility: Several reviews highlight that the long cable and magnetic strength make it easier to position the antennas for better reception.
- Reception improvement for some setups: Some buyers report better connectivity after swapping in these antennas.
- Performance may not beat stock antennas: Other reviews describe cases where these antennas performed the same or worse than original equipment in a specific network and location scenario, suggesting that results depend heavily on your router model, antenna ports, and where the antennas end up.
Overall, buyer-review evidence suggests this is a “placement-first” antenna upgrade, not a guaranteed speed booster, so you should plan to experiment with antenna positioning.
What this antenna set is for
This Bingfu dual-band antenna 4-pack is intended for devices that can use external WiFi antennas with RP-SMA male connections. It’s commonly relevant for:
- Home routers and WiFi access points that accept replaceable antennas.
- WiFi USB adapters and compatible network cards with RP-SMA antenna ports.
- Some WiFi IP camera and wireless video links, especially when the goal is improving signal by relocating antennas.
- FPV/AV receiver or extender-type use cases operating in 5GHz/5.8GHz.
Key specs that affect real-world use
Band support and antenna type
- 2.4GHz: 2400–2485 MHz
- 5GHz/5.8GHz: 5150–5850 MHz
- Gain: 9dBi (as specified)
- Pattern: omni-directional (as specified)
Because it’s omni-directional, it’s typically a good match when you need coverage without strict aiming. If you are able to point antennas toward a specific receiver, other directional antenna types can sometimes outperform, depending on your setup.
Mounting and cable length
The magnetic base and 3m (10 ft) RG174 coax cable are the practical differentiators. They let you move antennas away from metal enclosures or awkward router locations, and closer to windows, ceilings, or open areas where the wireless signal path is cleaner.
Connector compatibility (do not skip this)
This set uses an RP-SMA male connector. That means it must match your device’s antenna port, which may not be the same as “SMA.” If your router or adapter expects a different connector style, it will not thread on correctly, and using adapters can be necessary.
Pros and cons breakdown
Pros
- Flexible antenna placement thanks to magnetic mounting and a longer cable run.
- Broad dual-band coverage across 2.4GHz and 5GHz/5.8GHz bands.
- Simple shopping bundle: four antennas for multi-antenna routers, APs, or multiple devices.
Cons
- Not universally compatible if your ports are not RP-SMA male.
- Performance is not guaranteed, with review reports indicating outcomes can range from improved reception to no noticeable improvement in certain environments.
Who should buy (and who should avoid)
Best for
- People with RP-SMA male antenna ports who want to improve placement without permanently mounting antennas.
- Households trying to improve coverage in rooms where the router’s stock antenna positions are less ideal.
- Buyers who want a 4-pack for multi-antenna equipment or to standardize antennas across a few devices.
Skip it if
- Your device uses a different antenna connector standard (for example, SMA rather than RP-SMA).
- You expect a guaranteed speed boost with no experimentation. If your signal path is blocked by distance, walls, or interference, placement and device settings matter as much as the antenna.
Price and availability
The listed price for this 4-pack can change over time. If you are ready to compare your setup’s connector type and you want a cable-and-magnet placement upgrade, it can be worth checking the current cost before ordering.
Simple buying checklist before you order
- Confirm RP-SMA male support on your router, AP, or adapter.
- Decide where you can place antennas more effectively (ceiling, open areas, higher surfaces, or away from metal).
- Plan to test a few antenna positions. Omni-directional antennas help, but placement still drives results.
- If your goal is outdoor or very long-distance coverage, consider whether a directional antenna might better match your use case.
FAQs
Is this antenna set compatible with SMA connectors?
No. This kit uses RP-SMA male. If your device uses SMA (not RP-SMA), you will need to confirm compatibility or use the right type of adapter.
Does the “9dBi” spec mean I will get faster speeds everywhere?
Not necessarily. Antenna gain and performance depend on your router model, radio configuration, and especially antenna placement. Reviews include cases where performance improved, as well as cases where the results were disappointing versus stock antennas.
How long are the antenna cables?
The cables are 3m (10 feet) RG174 coaxial leads.
What bands do these antennas support?
They cover 2.4GHz (2400–2485 MHz) and 5GHz/5.8GHz (5150–5850 MHz).
Are these omni-directional antennas?
Yes, they are specified as omni-directional, which typically helps with more general coverage without requiring precise aiming.
Specifications
| Product Title | Bingfu Dual Band WiFi 2.4GHz 5GHz 5.8GHz 9dBi Magnetic Base MIMO RP-SMA Male Antenna 4-Pack for WiFi Router Wireless Network Card USB Adapter Security IP Camera |
|---|---|
| Category | Electronics > Computers & Accessories > Networking Products > Network Antennas |
| Brand | BINGFU |
| Manufacturer | Bingfu |
| Model Number | BFN00213 |
| Product Dimensions | 4.3"L x 11.4"W x 1.7"H |
| Color | 4-Pack [RP-SMA] Male Antenna |
| AntennaDescription | Dual Band WiFi Antenna |
| UPC | 790404680051 |
| Number of Items | 1 |
| Mfr Part Number | BFN00213 |
| Warranty Description | Bingfu |
| Unit Count | 4.0 Count |
| Impedance | 50 Ohms |
| Item Dimensions L x W x H | 4.3"L x 11.4"W x 1.7"H |
| Antenna | Dual Band WiFi Antenna |
Available variants
Color
- 4-Pack [RP-SMA] Male Antenna
- 2-Pack [RP-SMA] Male Antenna
- 1-Pack [RP-SMA] Male Antenna
Recommended next
TP-Link WiFi 6 USB Adapter for Desktop PC (Archer TX20U Plus) AX1800
The TP-Link Archer TX20U Plus is a USB WiFi 6 adapter designed to add dual-band (2.4GHz and 5GHz) wireless to a desktop PC. It supports WPA3 security and uses adjustable dual high-gain antennas for better signal, with MU-MIMO and OFDMA features intended to reduce network congestion. Biggest buying caveat: it relies on a USB 3.0 port for best performance and some setups may take extra time to connect.
NETGEAR Omnidirectional MIMO Antenna (6000451)
The NETGEAR Omnidirectional MIMO Antenna (6000451) is a plug-in upgrade for select NETGEAR hotspot routers, designed to improve cellular performance in buildings or other low-signal areas. It is best for buyers who need stronger, more consistent 4G/5G connectivity outdoors or near windows, with the key caveat that it only fits compatible NETGEAR M5 and M6 hotspot models.
Bingfu Dual Band WiFi 2.4GHz 5GHz 5.8GHz 3dBi MIMO RP-SMA (2-Pack)
A budget-friendly 2-pack dual band WiFi antenna set for RP-SMA equipped routers, PCs, and compatible IP camera or surveillance setups. Buyers commonly mention easier installation and a noticeable signal improvement, especially when replacing weak internal antennas.
Eightwood WiFi 6E Tri-Band Antenna 6GHz 5GHz 2.4GHz Gaming WiFi Antenna
The Eightwood WiFi 6E tri-band antenna is designed to improve Wi‑Fi signal strength and stability across 2.4GHz, 5GHz, and the 6GHz band for compatible Wi‑Fi 6E setups. It uses an RP-SMA male connector and includes a 6.5 ft extension cable plus a magnetic base for easier positioning.