Bigger 2 1/4 in x 150 ft Calculator Paper Rolls (10 Rolls)
Quick take
Bigger’s calculator paper rolls come in a 2 1/4 in (57 mm) width with 150 ft per roll, packaged as 10 rolls for longer stretches between reorders. They are designed for compatible adding machine models, and buyers consistently report clean, legible printing with easy loading. The main caveat is fit, make sure your calculator uses standard 2 1/4 in 1-ply bond rolls before purchasing.
Pros and cons
Pros
- 2 1/4 in (57 mm) x 150 ft rolls, with 10 rolls included for stock-up convenience
- Designed for smooth, legible printing on compatible calculator and adding machine models
- Reviewers report the tape fits their specific machines and loads easily
- Paper quality is described as not thin, with ink not bleeding on the tape
Cons
- Compatibility depends on your machine accepting 2 1/4 in width 1-ply bond rolls
- Review evidence is limited to general fit and print impressions, not detailed performance testing
What buyers think
Buyer-review evidence centers on practical day-to-day use. Many reviewers say the rolls matched their calculator models and fit correctly, with smooth loading and well-aligned tape feed. Printing quality is described in straightforward terms, with expectations like sharp, readable output and minimal ink bleed. Several buyers also appreciate the value of having multiple rolls on hand, especially because it reduces how often they need to reorder. Overall, the feedback pattern points to reliable compatibility within the supported tape size, plus consistent handling during install.
What these paper rolls are for
These are adding machine and calculator tape rolls sized at 2 1/4 in (57 mm) wide and 150 ft (45.7 m) long. They are intended for calculators that use standard 2 1/4 in 1-ply bond paper rolls, including listed models such as Sharp HR-10RC, HR-170RC, HR-200RC, Sharp EL-1197PIII and EL-1801V, Canon P23-DHV-3, Casio HR-170RC, Victor models like 1208-2 and 1212-3A, and several others with the same tape format.
Key specifications that matter when you buy
Size and length
Each roll measures 2 1/4 in (57 mm) wide and 150 ft (45.7 m) long. This is the primary dimension to verify against your machine’s tape requirement, because even small width differences can cause feed or print issues.
Paper type and print feel
The tape is described as smooth and built for clear, legible printing. Buyers also comment that the paper does not feel thin and that ink output does not bleed on the paper pulp in normal use.
Quantity and packaging
You get 10 rolls total. The listing also emphasizes sealed packs of five for easier storage and inventory management, which can be helpful in office environments where supplies are tracked.
Pros and cons for different buyers
Best for
- Offices, small businesses, and home users who want longer stretches between orders (10 rolls total)
- Anyone replacing paper tape on a compatible model that takes 2 1/4 in (57 mm) 1-ply bond rolls
- Shoppers who prefer straightforward tape that loads easily and produces readable output
Who should avoid
- Buyers whose calculator requires a different tape width or a different paper format (double-check width first)
- People shopping for a specific “specialty” paper effect, since the emphasis here is standard smooth adding machine tape
Compatibility checklist before you order
To avoid wasted time and reinstallation, confirm these points match your machine:
- Your calculator or adding machine accepts 2 1/4 in (57 mm) wide tape
- Your machine uses 1-ply bond style calculator paper rolls
- Your model appears in the general compatibility list (or otherwise matches the same tape format)
Verdict
Bigger’s 2 1/4 in x 150 ft calculator paper rolls are a practical choice if you need standard 57 mm calculator tape for compatible adding machine models. The main strengths are fit for supported machines, smooth handling during load-in, and printing that buyers describe as clean and readable. If your calculator’s tape size is different, this is not the right roll format, so width verification is the key buying step.
FAQ
Is this calculator tape 2 1/4 in wide?
Yes. The roll width is 2 1/4 in (57 mm), which is the main dimension to confirm against your calculator’s paper specification.
How long is each roll?
Each roll is 150 ft (45.7 m) long.
How many rolls are included?
There are 10 rolls total.
What machines is it compatible with?
It’s intended for calculators that use standard 2 1/4 in 1-ply bond paper rolls, including several models listed for common brands such as Sharp, Casio, Canon, and Victor, as well as other compatible units using the same tape format.
Will it bleed ink or produce fuzzy text?
Buyers describe legible, sharp output and say ink does not bleed on the tape in normal use. If you notice print quality issues, the most common cause is a mismatch in tape format or machine ink/ribbon conditions.
Specifications
| Product Title | 2 1/4 in x 150 ft Calculator Paper Rolls 2 1/4 Adding Machine Tape Paper Rolls, for HR-10RC, HR-170RC, HR-200RC, EL-1197PIII, EL-1801V, P23-DHV-3, CP-90A, MP11DX-2, 1280-2, 53 GSM, 10 Rolls |
|---|---|
| Category | Electronics > Accessories & Supplies > Office Electronics Accessories > Calculator Accessories |
| Brand | Bigger |
| Manufacturer | TIAN WEI IMAGE PRODUCTS MANUFACTURER |
| Color | white |
| Item Weight | 53 Grams |
| Paper Size | 2 1/4 inches (57mm) wide, 150 feet (45.7m) long |
| Sheet Count | 1360 |
| Paper Weight | 48 |
| Item Dimensions L x W | 2.25"L x 2.25"W |
| Paper Finish | Smooth |
| Material Features | Biodegradable |
| Brand Name | Bigger |
| UPC | 850048784505 |
| Unit Count | 10.00 Count |
| Sheet Size | 2 1/4 inches (57mm) wide, 150 feet (45.7m) long |
Available variants
Size
- 32
- 10
Style
- 3" x 150'
- 2 1/4" x 150'
Recommended next
ienza USB Power and Data Cable for Texas Instruments Calculators
A replacement USB power and data cable designed for specific Texas Instruments graphing calculators (TI-84 Plus CE, TI-84 Plus C Silver Edition, TI-89 Titanium, and TI-Nspire CX/CX CAS). It’s built for charging and computer syncing, with a cable length around 2.5 to 3 feet, so the main tradeoff is reach.
BOVKE Hard Carrying Case for Texas Instruments TI-84 Plus CE/TI-84 Plus/TI-83 Plus CE/TI-83 Plus/Casio fx-9750GIII Graphing Calculator
A slim, EVA hard-shell case designed for TI-84 Plus CE and related graphing models, with a zippered mesh accessory pocket and straps to keep cables and small items organized. Best for students and exam-day travel, with the main tradeoff being that it is a case only, so you still need your calculator and accessories separately.
(24 Rolls) 2 1/4 x 150 ft White Adding Machine Tape Paper Rolls Premium One Ply Register Adding Machine/Calculator Paper Rolls Printing Calculator 10 Key
These white one-ply adding machine tape rolls are sized for common register and calculator machines (2 1/4 in wide) and are designed for straightforward, day-to-day print use. Based on buyer feedback, they’re a practical choice for people who still run adding machine or calculator paper regularly, with an emphasis on fitting well and offering solid value.
FouceClaus Power Adapter Charger for Texas Instruments TI-84 Plus CE/TI-84 Plus/TI-Nspire CX/CX CAS/TI-89 Titanium Calculators
A budget-friendly replacement power adapter kit for select Texas Instruments graphing calculators (including TI-84 Plus CE and TI-Nspire CX/CX CAS). It delivers DC 5V (1000mA) with a 5-foot USB cable and includes multiple protection features, but you should double-check model compatibility before ordering.