Beats Headphones Replacement Audio Cable Wire 3.5mm to 3.5mm Aux Cord

Quick take

This 3.5mm to 3.5mm replacement aux cable is designed to work with specific Beats models (and several other select 3.5mm-jack headphones) using gold-plated connectors and OFC wire. It is a solid “backup cord” option for listening on devices with a headphone jack, but you need to match compatibility closely since it has no microphone or volume controls and is not for Bose or JBL.

Pros and cons

Pros

  • Built for select Beats and Sony headphones with listed 3.5mm-jack compatibility
  • Gold-plated, corrosion-resistant 3.5mm plugs for stable connection
  • Uses OFC wire and flexible, tangle-resistant TPE cable material
  • No-mic cable, which can be ideal if you only need audio passthrough

Cons

  • Not compatible with Bose and JBL headphones
  • No built-in microphone or volume control
  • Only works if your headphone model’s port matches the intended plug design, so fit matters

What buyers think

Reviewed productBuy on Amazon

Buyer-review evidence is limited but consistently points to correct fit when the cable is intended for the matching headphone port, with multiple reviews describing easy installation and secure connection (no wiggle or static during movement). The audio experience is also described as clear, and several buyers specifically purchased it after losing or damaging an original cable.

What you are really buying

This is a straight 3.5mm male-to-male auxiliary audio cable meant to replace a lost or damaged cord and restore wired playback. With a length of about 5.02 ft (153 cm), it is long enough for typical desk, couch, or travel setups where you want flexibility without a heavy trailing cable.

Compatibility is the main factor

Unlike a generic aux cord, this cable is built to fit specific headphone models. It is positioned for Beats by Dr. Dre headphones such as Solo2, Solo3, Studio2, Studio3, Wireless/HD/Pro/Mixr (among others listed), plus certain Sony WH-1000XM models (including WH-1000XM4 and WH-1000XM5) and additional brands with a matching 3.5mm jack design. It is explicitly not for Bose and JBL.

If your goal is to use this as a replacement, start by double-checking that your exact headphone model appears in the compatible list. Review feedback also reinforces that some Beats ports can be picky, so an “almost right” cable can still fail to fit.

Sound quality and build, in plain terms

Reviewed productBuy on Amazon

The cable focuses on connection stability and transmission quality, using 24K gold-plated corrosion-resistant plugs and oxygen-free copper (OFC) wire. The outer jacket uses premium TPE material, and the cable is described as tangle free and flexible for everyday handling.

In real buyer language, the most repeated outcomes are a snug connection and clear audio, suggesting the main purpose of a replacement cable is met when compatibility is correct.

Length and everyday usability

At 5.02 ft (153 cm), the cord strikes a practical balance. It is useful for wired listening when your player is not right next to you, and it should be easy to pack for travel. The straight design also tends to lay more predictably in bags or around your desk than coiled options.

Keep in mind this is a no-mic, no-volume-control cable. If you are trying to use it for calls or inline controls, you will need a different cable designed with those features.

Who should buy this cable

  • You need a wired replacement for a compatible Beats or listed Sony model
  • You want a backup cord for commuting, travel, or use with airplane-seat audio adapters (where a 3.5mm input is available)
  • You do not need inline controls and only care about audio passthrough
  • You prefer a more stable connector and a flexible, tangle-resistant cable feel

Who should skip it

Reviewed productBuy on Amazon
  • You have Bose or JBL headphones (this cable is not for them)
  • You need a microphone or volume controls (this cable is explicitly no-mic)
  • Your exact model is not on the compatibility list, since the “fits” outcome depends on the headphone port design

Price and availability

It is listed as an in-stock accessory with pricing shown on Amazon. Since replacement cables are small and compatibility-specific, check the current listing price and confirm the connector and headphone model match before purchasing.

Alternatives to consider

If you are not sure this will fit your headphone model, the best alternative is usually the same category item that is explicitly matched to your brand and model. For example:

  • Look for a model-specific replacement cable when your headphone is known to use a recessed or nonstandard jack fit.
  • If you need call control, prioritize a cable with a microphone and inline controls instead of a no-mic aux cord.
  • If your device has Bluetooth needs, a different approach may be better (for example, using the headphone’s wireless mode instead of relying on a wired aux cable).

Verdict

Reviewed productBuy on Amazon

This replacement 3.5mm to 3.5mm aux cable is a straightforward buy if, and only if, it matches your specific headphone model’s port requirements. When compatibility is right, buyers describe a snug fit and clear audio, and the construction is designed for daily wear. If you need a mic or you are using Bose or JBL headphones, you should look for a different cable built for your setup.

FAQ

Does this 3.5mm cable have a microphone?

No. This cable is designed for audio only, with no built-in microphone and no volume control.

Will it work with any headphones that have a 3.5mm jack?

Not automatically. It is intended for select headphone models listed for compatibility, and fit depends on the headphone port design. If your exact model is not included, compatibility may be an issue.

Is it compatible with Beats Solo2, Solo3, and Studio3?

It is specifically listed as compatible with multiple Beats models including Solo2, Solo3, and Studio3 (as well as related models listed on the product’s compatibility notes).

Is this cable compatible with Bose or JBL?

No. It is explicitly not for Bose and JBL headphones.

How long is the cable?

The cable length is about 5.02 ft (153 cm).

Buy on Amazon

Specifications

Product TitleBeats Headphones Replacement Audio Cable Wire 3.5mm to 3.5mm Aux Cord Compatible with Beats Solo2 Solo3 Studio3 Wireless HD Pro by Dr. Dre Sony WH-1000XM4 WH-1000XM5 WH-CH720N Headphones (No Mic)
CategoryElectronics > Headphones, Earbuds & Accessories > Extension Cords
BrandCallez
ManufacturerCallez
Model NameWC35-35B
Connectivity Technologywired
Item Weight0.04 Pounds
ColorBlack
Connector TypeAuxiliary
Cable TypeAUX
Compatible DevicesCompatible with Beats Studio 3 Studio 3.0 Studio 3 Wireless Studio 2 Studio 2.0 Studio 2 Wireless Solo2 Solo2 Wireless Solo3 Solo3 Wireless Headphones, Laptop, Personal Computer, Smartphone, Xbox
Other Special Features of the ProductDurable, Lightweight, Long Life-span, Short Circuit Protection, Tangle Free
Compatible Phone ModelsCompatible with Beats Studio 3 Studio 3.0 Studio 3 Wireless Studio 2 Studio 2.0 Studio 2 Wireless Solo2 Solo2 Wireless Solo3 Solo3 Wireless Headphones, Compatible with Skullcandy Audio Technica and more Headphones, Compatible with Sony WH-1000XM3 WH-1000XM4 WH-1000XM5 Headphones
Connector GenderMale-to-Male
Number of Pins3
Maximum Voltage3 Volts (DC)
Compatible Amazon Tablet ModelsAmazon Fire 7 5th Generation, Amazon Fire 7 7th Generation, Amazon Fire 7 9th Generation, Amazon Fire HD 10 5th Generation, Amazon Fire HD 10 7th Generation, Amazon Fire HD 10 9th Generation, Amazon Fire HD 8 5th Generation, Amazon Fire HD 8 6th Generation, Amazon Fire HD 8 7th Generation, Amazon Fire HD 8 8th Generation
Recommended Uses For ProductListening to music; Gaming; Watching TV
Indoor Outdoor UsageIndoor, Outdoor
Item ShapeRound
Brand NameCallez
Customer Package TypeFFP
ModelWC35-35B
UPC796914367994
Part NumberWC35-35B
Included ComponentsPremium TPE Materials, 24K Gold-plated Straight Plug and OFC Wires
Unit Count1.0 Count

Available variants

Color

  • Red
  • Blue
  • Black
  • White

Recommended next