ART Splitcom Pro 2 Way Microphone Splitter and Combiner, Monitor
Quick take
The ART Splitcom Pro is a transformer-based microphone splitter/combiner designed to route one mic to two outputs, or combine two mics into one. It uses a direct-coupled output plus an isolated output, with phantom power blocked from the isolated side, which helps when you need one feed for FOH/main and another for monitoring or recording.
The main buying caveat is workflow fit: it is built for mic-level XLR routing, so if you need different signal formats, cabling, or more complex routing, you may need a different category of device.
Pros and cons
Pros
- Direct and isolated outputs support common live and studio split setups (main/FOH plus monitor or recorder).
- Phantom power passes to the direct side but is blocked from the isolated output.
- Includes practical controls like ground lift and a phase invert switch.
- Buyer feedback repeatedly mentions clean, quiet audio and consistent sound between outputs.
Cons
- It is a single-mic 2-way splitter/combiner, so multi-channel needs may require multiple units.
- Built around XLR mic routing, so it does not solve non-mic or non-XLR connection requirements.
- Limited review evidence makes it hard to confirm how it performs in every extreme live scenario, like very dense rack configurations.
What buyers think
Buyer-review evidence points to a consistent theme: the splitter stays out of the way. Multiple reviewers describe the audio as clean and quiet when used to send a microphone signal to separate destinations, including voice and live monitor applications. There is also recurring feedback that both outputs sound effectively the same in day-to-day use, suggesting the splitter does not force users into constant gain changes.
Beyond sound quality, reviewers commonly call out the transformer isolation as the reason they chose it, especially when they want to split a mic to both a live mixer and a recording interface without dealing with typical routing headaches. Some buyers also mention the unit’s physical design, noting it stacks vertically rather than being laid out for traditional side-by-side horizontal rack mounting.
How the ART Splitcom Pro works (and why that matters)
This device handles two common jobs:
- As a splitter: it takes one microphone input and provides two outputs.
- As a combiner: it can combine two microphone signals into one output.
Its standout feature for real-world routing is that one output is direct-coupled while the other is isolated. In practical terms, that isolated path is intended to help reduce the kinds of issues people often associate with mic routing across different systems, particularly when you need to send one mic signal to multiple devices.
Phantom power behavior
Phantom power can be necessary for condenser microphones. This unit is designed so phantom power passes to the direct mic output, while phantom power is blocked from passing to the isolated output. That means you can typically feed your main system as needed, then send an isolated feed to your monitor or recording chain without phantom voltage also showing up there.
Phase invert and ground lift
If you run into polarity or grounding-related quirks when routing the signal into multiple destinations, the built-in phase invert and ground lift controls give you adjustment options without needing to rework your setup.
Pros and cons for common buyer use cases
Best for live sound, monitoring, and “main plus record” workflows
If you want the same mic to go to both your live mixer and a recording or monitoring destination, the splitter design is built for that. Buyer feedback specifically mentions using it to feed separate systems, including monitor and main stage setups, and also pairing it with a recording interface for parallel recording levels.
Best for voiceover and consistency-focused recording
For voice and spoken-word work, the consistent, quiet behavior described in reviews is the kind of benefit that matters. If your goal is to capture the performance on separate channels (for example, to manage varying loudness or compare processing later), a splitter that keeps the signal clean can simplify your workflow.
Who should consider a different approach
- You need multi-channel distribution: this is a 2-way device for one mic input path, so larger systems may call for multiple units or a different hub-style solution.
- Your signals are not standard XLR microphone level: this unit is for mic routing, so it is not the right tool for line-level or other interface formats.
Key specifications to know before you buy
- Connector type: XLR (male-to-female), 6-pin.
- Core function: 2-way microphone splitter and combiner.
- Controls: phase invert switch and ground lift switch.
- Isolation power behavior: phantom power passes to the direct output and is blocked from the isolated output.
- Item weight: 13.28 ounces.
- Use environment: indoor.
- Warranty: 1 year.
Price and availability
Pricing can vary by seller and timing. If you want the most current cost and stock status for the ART Splitcom Pro, check the live listing here: Buy on Amazon.
Verdict
The ART Splitcom Pro is a practical, transformer-based microphone splitter/combiner that is especially compelling when you need a clean split to two destinations and phantom-power control across those paths. Based on buyer feedback, it tends to deliver consistent, quiet audio for both live monitoring and recording. If you are looking for straightforward single-mic routing with isolation and simple controls, it is a strong fit. If you need more complex routing or many channels, plan on using multiple units or looking at a broader signal-routing solution.
FAQ
Can the ART Splitcom Pro send phantom power to a condenser mic?
Yes for the direct path. Phantom power is designed to pass through to the main/direct mic input/output path, while phantom power is blocked from the isolated output path.
Is it only a splitter, or can it also combine microphones?
It can do both. The unit is designed to split one microphone signal into two outputs, and it can also combine two microphone signals into one output.
Will both outputs sound the same?
Review feedback commonly describes the outputs as sounding effectively consistent, with users reporting minimal to no audible coloration or noise when the box is inserted into the signal chain.
Do I need ground lift or phase invert in every setup?
Not necessarily. These are there for troubleshooting and adjustment if you run into grounding or polarity-related issues when routing the signal to multiple systems.
How many microphones can it handle at once?
It is a 2-way device for a single signal path. If you need to split multiple microphones, you will generally use multiple units.
Specifications
| Product Title | ART Splitcom Pro 2 Way Microphone Splitter and Combiner, Monitor |
|---|---|
| Category | Electronics > Power Accessories > Isolation Transformers |
| Brand | ART |
| Manufacturer | Tascam |
| Model Name | AR2MS |
| Color | Black |
| Item Weight | 13.28 ounces |
| Connector Type | XLR |
| Cable Type | XLR |
| Compatible Devices | Monitor |
| Other Special Features of the Product | Phase Invert Switch, Ground Lift Switch |
| Compatible Phone Models | audio |
| Connector Gender | Male-to-Female |
| Number of Pins | 6 |
| Maximum Current | 8 Amps |
| Recommended Uses For Product | studio use, live sound, monitor applications, drum kits, choirs, instrument amps |
| Specification Met | Multiple Specifications Met |
| Indoor Outdoor Usage | Indoor |
| Unit Count | 1.0 Count |
| Number of Items | 1 |
| Brand Name | ART |
| Customer Package Type | Standard Packaging |
| Model | SPLITCOMPRO |
| UPC | 840402018308 |
| Global Trade Identification Number | 00840402018308 |
| Warranty Description | 1 year |
| Part Number | Splitcom Pro |
Available variants
Style
- PROSPLIT
- SPLITCOMPRO
Recommended next
iFi LAN iSilencer - LAN Signal Noise Filter - Ethernet Isolator for Hi-Res Audio Systems (RJ45)
The iFi LAN iSilencer is a simple RJ45 Ethernet inline filter designed to isolate a network connection and reduce electrical noise that can interfere with digital audio and streaming devices. It supports gigabit Ethernet, includes surge protection (TVS), and is aimed at buyers who want a cleaner network link for a hi-fi streamer and also care about video stability. Expect the biggest gains in well-tuned systems, while some setups may see no audible change, and advanced audio workflows may not suit every Roon/streaming chain.
MG Electronics MGT-1240 Class II Transformer (12VAC, 40VA, UL/CSA Approved)
The MG Electronics MGT-1240 is a Class II 12 volt AC (12VAC) transformer rated for 40VA, designed for common low-voltage AC loads like security systems and small appliances that specify 12VAC. Buyers report it is solid and straightforward to replace, with a helpful power indicator LED, but it is heavy and buyers may need to confirm which terminals to use.
Tripp Lite IS1800HG Isolation Transformer 1800W Medical Surge 120V 6 Outlet TAA GSA
The Tripp Lite IS1800HG is an 1800W isolation transformer with 6 hospital-style outlets for powering sensitive, noise-prone devices. It’s designed for complete input line isolation (with Faraday shielding), surge suppression, and low leakage, making it a strong fit for studio or medical-grade power needs, with the main caveat that it is not meant to be overloaded or used like a general-purpose power conditioner for large loads.
Honeywell 1361-GT Transformer, 16.5Vac, 40VA, 2.4A
The Honeywell 1361-GT Transformer is a rail-mount isolation transformer intended for powering compatible security/control panels and related low-voltage equipment. Buyers consistently describe reliable operation and solid build quality, with one notable tradeoff: it can produce a loud buzzing sound in quiet spaces.