Arducam for Raspberry Pi Camera Ribbon Flex Extension Cable Set (7Pcs)
Quick take
This 7-piece ribbon flex cable kit helps you extend Raspberry Pi camera connections with multiple pre-cut lengths, so you can route wiring inside cases and custom enclosures more easily. It includes both 15-pin 1.0mm pitch cables (Raspberry Pi camera) and 22-pin 0.5mm pitch options (Pi Zero camera), which is the key detail to get right for compatibility.
The main buying caveat is choosing the correct pitch and the right end type for your exact camera/display connector.
Pros and cons
Pros
- Multiple lengths for Raspberry Pi camera builds (15cm, 20cm, 30cm, 50cm, 100cm) for flexible cable routing.
- Includes Pi Zero-specific lengths (shorter options) with the matching 22-pin 0.5mm pitch interface.
- Designed specifically for Raspberry Pi camera and compatible camera/display connection setups.
- Buyer feedback highlights “just as advertised” quality and that the cables work well for projects that need extension.
Cons
- Compatibility depends on connector pitch (1.0mm for Raspberry Pi camera versus 0.5mm for Pi Zero), so mismatches are possible if you pick the wrong cable.
- Flex ribbon cables can be sensitive to handling and routing, so planning the run matters in tight enclosures.
What buyers think
Buyer-review evidence for this cable set is largely consistent on basic expectations. Multiple reports describe the kit as matching what was advertised, with buyers using different lengths for different projects (including longer runs for reworking cable paths in an enclosure). Reviews also commonly point to the usefulness of having several options in one set, especially when you do not know the ideal routing distance ahead of time. Evidence on build durability is limited but generally positive, with comments indicating the cables arrived in good condition and were fit for ongoing project use.
What’s in the kit and which connections it’s for
This is a ribbon flex extension set meant for Raspberry Pi camera-related wiring. The main value is having multiple cable lengths, paired with two connector/pitch types so you can match the camera (and compatible display) interface you are working with.
Raspberry Pi camera cable lengths (15-pin, 1.0mm pitch)
- Five lengths for Raspberry Pi camera setups: 15cm, 20cm, 30cm, 50cm, and 100cm.
- Both ends use a 15-pin 1.0mm pitch interface.
Pi Zero cable lengths (22-pin, 0.5mm pitch on one end)
- Two lengths for Pi Zero camera setups: 7.3cm and 15cm.
- One end uses a 15-pin 1.0mm pitch interface, and the other end uses a 22-pin 0.5mm pitch interface.
Pros, cons, and the buyer-fit details that matter
When this cable set is a strong match
- You are building a Pi camera project with a distance between the camera and your main board. The range of lengths makes it easier to avoid awkward bends or tight routing.
- You want flexibility for monitoring and enclosure builds. This type of extension is commonly used for setups like OctoPrint monitoring or other camera monitoring projects.
- You have different enclosure layouts. Having several lengths in one kit reduces the chance you need to reorder cable pieces mid-build.
When you should think twice
- If you are unsure which pitch your camera connector uses. The set includes both 1.0mm pitch and Pi Zero-related 0.5mm pitch ends, but using the wrong cable type for your specific device can lead to a non-fit setup.
- If your build requires extremely tight routing. Flex ribbon cables are convenient, but they still require careful handling and planning around corners and clamping areas.
How it compares to buying single-length cables
If you only need one extension length, a single cable can seem simpler and cheaper. But for Pi camera enclosures, the “right” length is often determined by how you route around standoffs, cable channels, and access points. This kit tends to be a better fit when you want to iterate on cable runs, because you can start with a shorter option and only switch to a longer length if the layout demands it.
Verdict: is it worth it?
The Arducam Raspberry Pi camera ribbon flex extension cable set is a practical choice for builders who want multiple routing options for Raspberry Pi camera (plus Pi Zero-compatible lengths) in one purchase. It is most worth it when your project needs extension and you want the flexibility to choose the best run length. Just be careful to match the correct connector pitch to your camera or display interface before you commit to cable routing.
FAQs
What lengths are included in the Arducam Raspberry Pi camera ribbon extension kit?
The kit includes multiple Raspberry Pi camera extension lengths (15cm, 20cm, 30cm, 50cm, and 100cm) plus two shorter Pi Zero-related lengths (7.3cm and 15cm).
Do I need the 1.0mm pitch or the 0.5mm pitch cables for my setup?
Use the correct pitch for your camera interface. The set includes 15-pin 1.0mm pitch cables for Raspberry Pi camera connections, and Pi Zero-related lengths that include a 22-pin 0.5mm pitch interface on one end.
Will these cables work with Raspberry Pi camera and compatible displays?
The kit is intended for Raspberry Pi camera projects and compatible camera/display connection setups, where the ribbon flex interface is the relevant connector type. Matching connector pitch and pin configuration is the key to getting a proper fit.
Is this cable set suitable for projects like OctoPrint monitoring?
Yes, the kit is commonly used for Raspberry Pi camera monitoring builds where you need extra reach from the camera module to the Raspberry Pi.
How many cables are included?
There are 7 cables in the set.
Specifications
| Product Title | Arducam for Raspberry Pi Camera Ribbon Flex Extension Cable Set (7Pcs), 5.9” 7.87” 11.8” 19.69” 39.37” for Raspberry Pi, 2.87” 5.91” for Pi Zero |
|---|---|
| Category | Electronics > Camera & Photo > Accessories > Cables & Cords |
| Brand | Arducam |
| Manufacturer | Arducam |
| Model Name | B0177 |
| Color | Camera Ribbon Flex Extension Cable Set |
| Item Weight | 0.01 Kilograms |
| Connector Type | Fpc Connector (1.0mm Pitch for Raspberry Pi Camera, 0.5mm Pitch for Raspberry Pi Zero Camera) |
| Cable Type | flex ribbon |
| Compatible Devices | Raspberry Pi |
| Other Special Features of the Product | Tangle Free |
| Compatible Phone Models | Raspberry Pi |
| Connector Gender | Male-to-Female |
| Number of Pins | 15 |
| Maximum Current | 9 Amps |
| Maximum Voltage | 5 Volts |
| Recommended Uses For Product | Home Security,Monitoring |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Item Shape | Round |
| Brand Name | Arducam |
| Customer Package Type | Coiled/Bundled in Protective Packaging |
| Model | B0177 |
| Part Number | B0177 |
| Unit Count | 7.0 Count |
| Number of Items | 7 |
| Outer Material | Flexible plastic/rubber |
| Special Feature | Tangle Free |
Recommended next
Travel Essentials for Apple Watch Charger,iPhone Charger,3 in 2 Type C/Lightning/Magnetic Travel Charging Cable
A compact 3-in-2 travel charging cable that combines USB-C and Lightning charging with a magnetic Apple Watch connector. Best for travelers who want one cord for an iPhone plus an Apple Watch, with the main tradeoff being that the watch magnet works best when the charger is kept still on a flat surface.
Travel Essentials for Apple Watch Charger,iPhone Charger,3 in 2 Type C/Lightning/Magnetic Travel Charging Cable
A compact, travel-focused 3-in-2 charging cable designed to power an iPhone, USB-C device, and a magnetic Apple Watch charger from one cord. It aims for safe, multi-device convenience, with a key tradeoff being watch magnet alignment (best on flat, stationary surfaces).
Travel Essentials for Apple Watch Charger,iPhone Charger,3 in 2 Type C/Lightning/Magnetic Travel Charging Cable,Portable Multi Charging Cable for Apple Watch, iPhone 17‑11,Samsung S26,Car,iPad-5FT
A compact 3-in-2 charging cable designed for travel, combining a USB-C/Lightning charging cable with a magnetic Apple Watch-style connector. It’s built for daily grab-and-go use, with braided nylon and metal connectors, but the watch magnet strength may be better for stationary charging than for movement.
Travel Essentials for Apple Watch Charger,iPhone Charger,3 in 2 Type C/Lightning/Magnetic Travel Charging Cable
A compact 3-in-2 charging cable designed to keep an Apple Watch magnetic charger and iPhone Lightning plus USB-C charging in one travel-friendly cord. It’s built with braided materials and safety protections, but the watch magnet strength and travel portability are the two main factors to consider before buying.