Aqara Presence Sensor FP2 Bracket Set, mmWave Radar Wired Motion Sensor
Quick take
The Aqara Presence Sensor FP2 Bracket Set is a wired mmWave radar presence sensor built for zone-based automations, including multi-person detection. It is a strong fit if you want more reliable presence detection than typical PIR sensors and you plan to use ecosystems like HomeKit or Home Assistant. The main tradeoff is practical setup: it needs constant power, and some capabilities depend on mounting mode, which can complicate configuration.
Pros and cons
Pros
- MmWave radar supports precise movement detection (including subtle motion) and privacy-friendly monitoring (no camera).
- Zone positioning lets you split a room (up to 30 zones) for different automations by area.
- Multi-person detection can identify up to 5 people at once for scenario control.
- Works without an Aqara hub, and is exposed to multiple ecosystems, including HomeKit, Alexa, and Home Assistant.
Cons
- Wired sensor that should be constantly powered, which limits placement options versus battery sensors.
- Some features are mode-dependent, and the device placement/mounting affects what you can use (sleep vs fall detection).
- Home Assistant setup can feel fiddly, with binding steps that may require Apple Homekit during setup.
- Cable included in the box is described by some buyers as short and not ideal for wall mounting.
What buyers think
Buyer feedback is generally positive around accuracy and the ability to create automations that are harder to achieve with standard PIR motion sensors. Multiple buyers highlight strong performance with zone-based logic, and note that it can reliably detect people moving within rooms for lighting control.
Home Assistant experiences appear mixed but still workable. Some shoppers report smooth integration after setup, while others mention that binding or setup steps can be confusing or require additional effort. A few buyers also point to networking factors, suggesting that connectivity quality may depend on adequate router coverage for IoT devices.
Overall, buyer-review evidence is consistent that the FP2 delivers on presence and zoning, but the setup pathway and wiring practicality are the main friction points.
What the Aqara Presence Sensor FP2 bracket set actually does
This sensor is designed to detect presence and movement using millimeter-wave radar rather than relying solely on infrared changes. That matters for automation because radar-based presence can support more nuanced “people in the room, people in this zone, everyone left” style routines.
Key capabilities include:
- Multi-person detection, supporting up to 5 people simultaneously.
- Zone positioning, with the ability to divide a room into up to 30 zones and trigger different automations per zone (for example, bed area versus desk area).
- Sleep monitoring mode and fall detection mode, both intended to generate notifications and reports rather than medical-grade monitoring.
- Privacy-focused sensing, with no camera monitoring.
Zone positioning and multi-person automation, in practical terms
If you are tired of motion sensors that trigger too easily or fail to differentiate “someone is here” from “someone just passed through,” the FP2’s zoning approach is the differentiator. Instead of treating an entire room as one detection area, you can map zones and tie automations to those zones.
Buyers who use multiple units often do so to support room-level presence plus zone logic, using the sensor to drive lighting behavior (like turning lights off when everyone has left) rather than simple on/off motion triggers.
Mounting, wiring, and why it affects your setup
This FP2 is a wired presence sensor, meaning it should remain powered. That impacts where you can place it, especially if you were considering ceiling-mounted battery sensors.
Placement also matters because the sensor supports different detection modes. Some features are intended for specific mounting choices, so it is worth planning ahead:
- Corner mounting is supported with an included angle mount, which can reduce dead zones caused by angle and rotate the room layout by 45 degrees (useful if wall placement is awkward).
- Sleep monitoring and falling detection are described as separate modes, and buyers note they are not designed to be used interchangeably without considering mounting and mode selection.
Some shoppers mention the included cable is short and may not be ideal for wall mounting, so you may want to think about cable routing before you install.
HomeKit, Alexa, and Home Assistant: where it works well and where to watch
The FP2 is designed to be exposed as multiple sensors to major smart home ecosystems. One advantage is that it can be integrated without requiring an Aqara hub, which can simplify deployment for users who already manage smart devices through Home Assistant or Apple Home.
For Home Assistant specifically, buyers report that it can work well once it is properly connected, but setup steps may require extra care. Some users describe a workflow that relies on Apple Homekit binding before Home Assistant integration can “see” the device properly. If you are building a Home Assistant automation stack, this is a key consideration before you buy.
For stable connectivity, the sensor is designed for 2.4 GHz Wi-Fi, and placement within a certain distance of your router can affect reliability. If your home’s IoT coverage is spotty, that can impact results.
Privacy and “wet environment” use
The sensor uses mmWave radar technology for presence detection, which avoids camera-based monitoring. It is also described as having an IPX5 rating, which suggests it can handle wet environments better than many indoor-only devices, making it potentially more flexible for areas like bathrooms or covered entryways (as long as installation still meets your electrical and mounting needs for a wired unit).
It also includes a built-in light sensor for automations, with this capability noted as available through certain platforms.
Pros and cons summary
- Best for: people who want zone-based presence automations, multi-person detection, and more nuanced “presence” behavior than basic PIR motion sensors.
- Good fit if you use: HomeKit and/or Home Assistant, and you are comfortable with the idea that setup may involve ecosystem-specific binding steps.
- Who should consider another option: shoppers who need battery-powered placement, want a single-purpose always-on motion trigger (no zoning), or are looking for the simplest possible Home Assistant onboarding without Apple Homekit involvement.
Price and availability
The FP2 bracket set is listed at a premium compared with typical motion sensors, reflecting its radar presence and zoning features. If you are cost-sensitive, you may want to compare how much you will actually use zone automations, multi-person scenarios, and the mode-specific sleep or fall detection features.
Verdict: should you buy the Aqara Presence Sensor FP2?
Choose the Aqara Presence Sensor FP2 bracket set if presence detection accuracy and room zoning are your priorities, especially for automations like “people in zone” and “everyone left” behaviors. It is also appealing if you want privacy-friendly sensing without cameras and you can handle wired power and planning placement for the modes you care about.
If you primarily need basic motion alerts, or you want the easiest possible smart home setup with minimal binding steps, you may be happier with a simpler PIR motion sensor. But for shoppers committed to smarter presence automations, the FP2 is one of the more capable options in the category.
Compare by your use case
If you want smarter lighting schedules
The FP2’s zones and presence-style logic are a better match than single-area PIR motion, particularly in rooms where people move slowly or where “passing through” and “staying” need different outcomes.
If you need effortless Home Assistant setup
Expect that integration may require an Apple Homekit binding step during setup. If that extra workflow sounds inconvenient, consider whether you are comfortable with it, or choose a different presence sensor designed for simpler onboarding in your setup.
FAQ
Is the aqara presence sensor FP2 a camera?
No. It uses mmWave radar for presence and movement detection, designed to avoid camera monitoring.
Does the FP2 work without an Aqara hub?
Yes. It can be integrated into smart home ecosystems like HomeKit, Alexa, and Home Assistant without requiring an Aqara hub.
Is the FP2 a battery sensor?
No. It is a wired sensor that should be constantly powered.
Can it detect multiple people at once?
Yes. The FP2 supports detection of up to 5 people simultaneously.
How does zone positioning help with automation?
Zone positioning lets you divide a room into multiple zones (up to 30), then trigger different automations based on which zone is occupied.
Does Home Assistant integration require extra steps?
Some buyers report that binding through Apple Homekit may be part of the workflow before Home Assistant can recognize the device integration. If you use Home Assistant heavily, plan for that possibility.
Get the latest price
Specifications
| Product Title | Aqara Presence Sensor FP2 Bracket Set, mmWave Radar Wired Motion Sensor, Zone Positioning, Multi-Person & Fall Detection, Supports HomeKit, Alexa, and Home Assistant, 2.4 GHz Wi-Fi Required |
|---|---|
| Category | Electronics > Security & Surveillance > Motion Detectors |
| Brand | Aqara |
| Manufacturer | Lumi United Technology Co., Ltd |
| Mounting Type | Wall Mount |
| Smart Home Compatibility | Smart Home Compatible |
| Item Dimensions | 2.51 x 2.51 x 1.14 inches |
| Brand Name | Aqara |
| Model | PS-T02E |
| UPC | 192784002124 |
| Included Components | Metal Plate × 1, Presence Sensor FP2 & Bracket×1, Sticker × 1, Screw Kit × 1, USB-C to USB-A Cable × 1, User manual ×1 |
| Item dimensions L x W x H | 2.51 x 2.51 x 1.14 inches |
Recommended next
Westek MLC12BC-4 Indoor Plug-in Corded Motion Activated Light Control, Single, White
The Westek MLC12BC-4 is a plug-in motion-activated light control meant for indoor use. It can turn a lamp or small appliance on when motion is detected (up to 25 ft) and then shut it off after a programmable delay from 1 to 20 minutes.
Driveway Alarms Wireless Outside Weatherproof
A plug-in outdoor motion detector system designed for driveways, yards, and entry paths. It pairs quickly with weatherproof sensors, offers adjustable detection settings, and includes many ringtones plus volume control, with the main caveat being that placement and sensitivity affect false alerts.
BESTOONE Motion Sensor Alarm, Long Range Wireless Driveway Alarm, Indoor Home Security System Electric Doorbells
The BESTOONE wireless motion sensor alarm kit combines multiple PIR motion detectors with an AC-powered chime receiver. It is designed for quick entry alerts across garages, driveways, porches, and indoor rooms, with a choice of 38 chime tunes plus LED-only “quiet” mode. The main tradeoffs are that the detector placement matters (sensitivity and false-alert prevention) and outdoor use needs protection since it is not waterproof.
HTZSAFE wireless driveway alarm (1 receiver + 2 motion sensors)
An outdoor/indoor wireless driveway alarm kit with weather-resistant motion sensors, a plug-in receiver, and long-distance transmission (up to 1/2 mile in ideal conditions). It’s designed for larger properties where Wi-Fi or cellular coverage is limited, with adjustable detection sensitivity and expandable coverage if you add more sensors.