Antennas Direct VHF Indoor Outdoor TV Antenna Reception Accessory Kit, Weatherproof - w/Built-in Combiner, 3’ Coaxial Cable, Zip Ties, VHF-1 (Black)
Quick take
This Antennas Direct VHF-1 accessory kit is meant for people who already have a UHF antenna but need help receiving hi-VHF TV channels (channels 7 to 13). It adds a weatherproof VHF element with a built-in combiner and a short RG6 coax lead, and it can be attached to compatible UHF reflector screens or mast-mounted for broader use.
The main caveat is that it targets hi-VHF only (174 to 216 MHz). If you are specifically trying to pull VHF-low channels, you may need a different antenna approach.
Pros and cons
Pros
- Targets hi-VHF channels 7 to 13 (174 to 216 MHz), filling a common gap in UHF-only setups.
- Weatherproof housing supports indoor, outdoor, or attic use, making it practical for many mounting locations.
- Designed to integrate with compatible UHF reflector screens (and can be mast-mounted), so you can combine VHF with your existing system.
- Includes a 3 ft RG6 coax cable and zip ties for installation basics.
Cons
- Not a universal solution for all VHF reception, it is focused on hi-VHF (174 to 216 MHz).
- Reception improvements depend on distance, terrain, foliage, building materials, and local tower placement, so results can vary.
- Install fit can be awkward if your UHF antenna’s reflector geometry does not line up well with the intended mounting method.
What buyers think
Buyer-review evidence suggests this kit is a strong fit when the missing stations are hi-VHF (often channels 7 to 13) and your primary antenna is otherwise handling UHF channels well. Multiple reviewers describe noticeable improvement after adding the VHF accessory, particularly for stations that are VHF while others remain available on UHF. The installation experience is frequently described as straightforward when used with compatible Antennas Direct UHF reflectors.
There is also limited but important evidence that outcomes vary by location. In cases where the goal includes VHF-low reception, results have been disappointing, and buyers moved to other solutions such as a station-specific antenna for VHF-low. Overall, the pattern points to this kit being most effective as a targeted hi-VHF add-on rather than a catch-all replacement.
Who this is for
This is a good match if:
- You already have a UHF antenna (for example, a UHF-only reflector-based setup) and you want hi-VHF stations added to the mix.
- Your market includes VHF channels in the 7 to 13 range that are inconsistent or missing.
- You need a weatherproof accessory you can mount outdoors, in an attic, or in a similar environment.
- You want to enhance your existing antenna system instead of buying a completely new multi-band antenna.
Who should avoid it
You may want to skip (or plan on alternative hardware) if:
- Your priority is VHF-low channels. This kit is designed for hi-VHF (174 to 216 MHz), and that distinction matters.
- You expect one accessory to solve all reception problems regardless of obstructions or tower distance. Even with the right bands, signal quality still depends on line-of-sight and local conditions.
- Your current UHF antenna is not compatible with the intended attachment method, and you are not comfortable with mast-mounting instead.
Key features and how the kit fits into your setup
It’s a hi-VHF add-on, not a full antenna replacement
The VHF-1 is built to provide hi-VHF TV signal reception for channels 7 through 13. If your stations in that range are struggling, adding the correct band coverage can reduce pixelation or missing channels in areas where UHF reception is already solid.
Weatherproof design for flexible mounting
The housing is weatherproof for indoor and outdoor use. That matters because antenna performance can change with seasons (for example, foliage), and a mount that is exposed to the elements helps keep your setup consistent year-round.
Built-in combiner for integrating with a UHF system
The kit includes a built-in combiner so you can integrate the VHF accessory with your existing antenna approach. In practical terms, it is aimed at people building a combined VHF and UHF reception system rather than running VHF and UHF completely separate.
Compatibility and mounting options
It is designed to attach to UHF reflector screens from Antennas Direct and can also be mast-mounted for universal TV antenna applications. If you are using a compatible reflector, you typically get the easiest alignment. If not, expect a bit more trial-and-fit (zip ties are included).
Range and real-world reception expectations
The kit’s specified range is 25 to 50+ miles from broadcast towers for hi-VHF performance. In real homes, “miles” is only part of the story. Terrain, trees, foliage, building materials, and the exact location of towers relative to your antenna mounting point can strengthen or weaken the signal you receive.
If your UHF channels are already stable, adding hi-VHF coverage is more likely to help. If you are far from towers or heavily obstructed, you may still need to adjust antenna position, consider additional signal processing, or use a more location-specific antenna strategy.
Pros and cons recap
- Best at: adding hi-VHF (channels 7 to 13) capability to a UHF-based setup.
- Most likely to disappoint: shoppers who specifically need VHF-low coverage, or who expect a simple add-on to overcome heavy obstructions and distance.
- Value angle: it can be a lower-cost path to band coverage than replacing your entire antenna, especially when your UHF antenna already works well for most stations.
Verdict
Consider the Antennas Direct VHF-1 if your antenna problem is clearly band-specific, you are missing hi-VHF stations (channels 7 to 13), and you want a weatherproof add-on that integrates with a compatible UHF reflector setup. Skip it if your goal is VHF-low, because that is a different frequency range and buyers who tried to cover low-band stations found they still needed a different solution.
Price and availability
Check current pricing and stock status for the VHF-1 kit before buying, since availability can change. You can also compare against the cost of a full multi-band antenna if you discover you need more than hi-VHF.
FAQ
Does this kit help with VHF-low channels?
This kit is designed for hi-VHF, covering 174 to 216 MHz (channels 7 to 13). If you need VHF-low, you will likely need a different antenna approach.
Will it work with any UHF antenna?
It is intended to attach to compatible UHF reflector screens and can also be mast-mounted for universal use. If your antenna does not match the intended attachment method, installation may take extra effort and results may vary.
Is it only for outdoor installations?
No. It is weatherproof and can be used indoors, outdoors, or in an attic.
What range should I expect?
The kit is specified for about 25 to 50+ miles from broadcast towers for hi-VHF performance. Actual reception depends on local terrain, foliage, building materials, and tower placement.
Do I still get UHF channels with this kit?
This is an accessory meant to add VHF coverage to a UHF-based system. Your UHF reception depends on your existing UHF antenna, while this kit is meant to help with hi-VHF channels.
Specifications
| Product Title | Antennas Direct VHF Indoor Outdoor TV Antenna Reception Accessory Kit, Weatherproof - w/Built-in Combiner, 3’ Coaxial Cable, Zip Ties, VHF-1 (Black) |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Marine Electronics > Marine Antennas |
| Brand | Antennas Direct |
| Manufacturer | Antennas Direct Inc. |
| Model Number | VHF-1 |
| Color | Black |
| Item Weight | 6.4 Ounces |
| Product Dimensions | 31.3"L x 2"W x 3.1"H |
| AntennaDescription | Television |
| UPC | 817848011088 |
| Global Trade Identification Number | 00817848011088 |
| Number of Items | 1 |
| Mfr Part Number | VHF-1 |
| Warranty Description | 90-Day Manufacturer Accessory Warranty |
| Unit Count | 1.0 Count |
| Impedance | 75 Ohms |
| Maximum Range | 50 Miles |
| Item Dimensions L x W x H | 31.3"L x 2"W x 3.1"H |
| Antenna | Television |
| Number of Packs | 1 |
Available variants
Style
- 35 Mile VHF Add-On
Recommended next
Tram 1600-HC Pretuned 35-Inch VHF Fiberglass Antenna with RG58 Cable and PL-259 Connectors
The Tram 1600-HC is a pretuned, fiberglass marine VHF antenna built around a low-profile, bottom-loaded coil and a 35-inch stainless steel whip. It’s designed for marine-band listening and communication across VHF frequencies, and it ships with RG58 coax plus PL-259 connectors to simplify installation for many boat setups.
Shakespeare 4' Centennial VHF Antenna, White
The Shakespeare 4' Centennial VHF Antenna (model 5104) is a compact, 50-ohm marine VHF antenna designed for boats that need a shorter mast height for bridge clearance. Buyers generally report solid reception for near-range use and a generally straightforward install, with the main caveat being that the connector work can be a bit fiddly depending on how you prefer to terminate coax.
Shakespeare 5101 8' Classic VHF Antenna
The Shakespeare 5101 is an 8-foot classic VHF marine antenna designed for VHF radio use, with brass and copper elements, a chrome-plated brass ferrule, and a 15-foot RG-58 cable plus PL-259 connector. It can be a straightforward replacement if you are comfortable with connector setup, and it is best suited for buyers using compatible marine mounting options.
Waveform DualMini: Low-Profile 2x2 MIMO Window Antenna Kit | Omnidirectional 4G/5G Routers & Hotspots for Netgear M5 & M6, Verizon, AT&T
The Waveform DualMini is a low-profile 2x2 MIMO window antenna kit designed to improve 4G/5G home internet performance by getting your router a stronger, cleaner cellular signal. It is built for shoppers with Verizon or AT&T/T-Mobile compatible gateways and wants an easier “no aiming” installation, with multiple mounting options and a bundled window entry cable.