Anker Nebula P1i Portable Projector with WiFi and Bluetooth by soundcore

Quick take

The Anker Nebula P1i is a portable 1080p (with 4K support) projector with Google TV built in, plus flippable 20W (2 x 10W) speakers that rotate to better aim sound. It is a strong fit for bedrooms, small den setups, and travel, but it is not designed for bright, daytime projection, and it does not include a built-in battery.

Pros and cons

Pros

  • Smart streaming built in with Google TV, Wi-Fi, and Bluetooth for connecting devices.
  • Quick setup features include autofocus and auto keystone correction, with obstacle avoidance.
  • All-glass lens and sealed optical engine are designed to resist dust and wear over time.
  • Flippable speakers help aim audio (90° horizontal, 200° up and down) for more flexible room placement.

Cons

  • Brightness is best in dim rooms, not bright daylight, and image brightness drops as throw distance increases.
  • No built-in battery, so you will need external power for camping or outdoor viewing.
  • Speakers can be weaker outdoors, and there can be occasional pairing or output glitches that may require a power cycle.
  • Durability over many hours is not something reviewers strongly confirm due to limited long-term evidence.

What buyers think

Reviewed productBuy on Amazon

Buyer-review evidence is limited in scope, but the recurring decision themes are clear. Many buyers like the overall picture quality for a portable projector, especially in dim or darkened rooms, with some also noting it can still work with ambient light (just not ideally in full brightness). Setup features like auto keystone and autofocus tend to be praised for reducing the hassle of leveling and alignment. The built-in flippable speakers are described as surprisingly good for indoor use, while outdoors is where expectations often change, with some buyers feeling bass is limited and volume can be less satisfying. Connectivity and responsiveness are mentioned positively, including cases where external devices like gaming consoles and streaming sticks worked well alongside the built-in Google TV. A small number of reviews mention occasional speaker pairing or audio output issues, typically solvable by powering the speaker off and back on.

Who this projector is for

  • Bedroom and small-room movie nights: With 1080p resolution and 380 ANSI lumens, it is aimed at comfortable viewing in dim-to-dark environments.
  • People who want quick setup: Autofocus plus auto keystone correction and obstacle avoidance can make it easier to go from “set it down” to “watch something.”
  • Travelers and flexible setups: Its portable form factor and built-in Google TV mean you can stream without adding a separate media player (though you will still need power).
  • Buyers who want usable built-in audio: The 2 x 10W speakers, designed to rotate for better aiming, can be enough for casual viewing indoors.

Who should skip it

  • Daytime or high-ambient-light viewing: If you regularly watch with windows fully open or in bright rooms, you will likely want a brighter option or a darker viewing approach.
  • Outdoor use without planning power: Since there is no built-in battery, you will need an external power source. (Power stations are commonly used for this purpose.)
  • Those expecting full home-theater audio: The integrated speakers are designed for convenience, but reviews suggest limited bass and less impressive outdoor sound.

Key features that matter in real use

Reviewed productBuy on Amazon

Smart streaming with google TV, Wi-Fi, and bluetooth

Google TV support makes it easy to stream popular apps directly, and Bluetooth lets you connect compatible audio devices if you want to upgrade the sound. Initial setup requires a Google account and internet connection for Google TV access.

Focus and keystone help reduce setup friction

Auto focus and auto keystone correction are built to simplify alignment when the projector is not perfectly positioned. Reviews repeatedly point to these automation features as a major reason buyers bought the P1i for easy, repeatable setup.

Brightness and image size, what to expect

With 380 ANSI lumens and 1080p native resolution, the P1i is positioned for crisp visuals in dim rooms. Brightness decreases as projection distance increases, so where you place it matters. For best clarity and a more satisfying image, plan for a shorter, darker setup rather than a long throw in ambient light.

Flippable speaker design for better audio aiming

The speakers rotate to help aim sound where people actually sit, with one described setup-friendly range for both horizontal and up-and-down angles. Indoor listening tends to be the sweet spot, and outdoors may benefit from an external soundbar or speaker if you want more punch.

Pros and cons, summarized

Good reasons to buy

  • You want a portable projector with built-in streaming, not a setup that depends on extra devices.
  • You care about easy alignment, autofocus, and keystone correction.
  • You value usable built-in audio for indoor viewing and flexible speaker direction.
  • You want an all-glass lens approach and a sealed optical engine meant to resist dust and wear.

Tradeoffs to plan for

  • Brightness is limited for daytime, and results will vary more than you might expect with ambient light.
  • External power is required, which adds planning for camping or outdoor use.
  • Speaker strength and bass may fall short for outdoor parties or immersive sound expectations.

Price and availability

Check the current price and availability on Amazon, since costs can change based on promotions and seller listings.

Buy on Amazon

Verdict

The Anker Nebula P1i is a practical pick for shoppers who want a smart, portable 1080p projector that is easy to set up and decent for indoor audio. It is most compelling for bedrooms, den movie nights, and travel where simplicity matters more than maximum brightness. If your priority is bright daytime projection, or you need a truly self-contained outdoor setup, you will likely need to adjust your expectations or consider a more purpose-built alternative.

FAQ

Does the Anker Nebula P1i have a built-in battery?

No. It does not include a built-in battery, so you will need external power. An external power station is often used to run it for a limited number of hours.

How bright is the Nebula P1i?

It is rated at 380 ANSI lumens. This generally means it is best for dim or dark rooms. Brightness can also drop with longer throw distances.

What resolution does it support?

It uses 1080p Full HD native resolution (1920 x 1080) and supports 4K content.

Is setup complicated?

Setup is designed to be quick. It includes autofocus and auto keystone correction, plus obstacle avoidance features intended to help get a properly shaped image without manual leveling.

Are the built-in speakers strong enough?

For indoor use, buyers describe the speakers as punchy and convenient. Outdoors, some buyers feel the sound can be weaker and may consider adding an external speaker or soundbar.

Can I use streaming apps without extra devices?

Yes. Google TV is built in, and popular apps like Netflix, YouTube, and Prime Video are available. You will need internet connection and a Google account for initial setup and access.

Does it work with gaming consoles or other devices?

It is compatible with devices like gaming consoles, laptops, smartphones, and TVs. Reviews also mention successful use with a gaming console and external streamers.

Specifications

Product TitleAnker Nebula P1i Portable Projector with WiFi and Bluetooth by soundcore, Flippable Design,1080P FHD, 4K Support, 380 ANSI Lumens, Auto Focus/Keystone, All-Glass Lens, Built-in Speaker
CategoryElectronics > Video Projectors
BrandSoundcore
ManufacturerAnker
Model NumberD2200
ColorBlack
Additional FeaturesAuto Focus, Auto Obstacle Avoidance, Built-In Wi-Fi
Connectivity TechnologyWi-Fi
Native Resolution1920 x 1080
Display Resolution Maximum1980 x 1080
Display TypeLCD
Form FactorPortable
Mounting TypeFloor Mount
Brightness380 Lumen
Wattage140 watts
Compatible DevicesGaming Console, Laptop, Smartphone, Television
Maximum Throw Distance4.78 Meters
Maximum Image Size150 Inches
Voltage110 Volts, 250 Volts
Hardware ConnectivityBluetooth 5
Minimum Throw Distance1.69 Meters
Minimum Image Size40 Inches
Video EncodingAVC
Projector Maximum White Brightness380 ANSI Lumens
Smart Home CompatibilitySmart Home Compatible
Antenna LocationHome Cinema
Built-In MediaRemote

Available variants

Set Name

  • P1
  • P1i

Recommended next