AGVEE 1ft Lightning Extension Cable, Braided Female to Male Extender
Quick take
The AGVEE 1ft Lightning extension cable is a short, braided extender that adds reach between your iPhone or iPad and a Lightning accessory. It is best for setup changes like charging in a case, studio or desk positioning, or making an included cable long enough to use comfortably.
Two caveats matter: it needs a specific connection order for iOS devices, and charging speed can be slower (about 10% to 20%) when you use it for power.
Pros and cons
Pros
- 1-foot length is useful when you only need a little extra reach to position your phone or accessory.
- Compatible with a wide range of Lightning iPhone and iPad models, including older Lightning devices.
- Designed to work with charging and data functions, including support for common Lightning accessory types (for example, audio and ethernet adapters).
- Braided, reinforced build with a TPE jacket intended for flexibility and cold resistance.
Cons
- Requires a specific plug-in order on iOS devices (connect the extender and peripherals first, then plug into the iPhone/iPad).
- Charging performance may be reduced by roughly 10% to 20% versus charging directly.
- Because it is an extender, it adds another connection point, so it is not the best choice if you need the most rugged, single-piece cable solution.
What buyers think
Buyer-review evidence points to the extension cable being genuinely helpful for everyday “reach” problems, especially setups where an iPhone keeps slipping or where a standard cable is simply too short for desk stands or recording positions. Several shoppers also emphasize that it works without forcing them to remove a protective case, which is a major quality-of-life benefit for charging and accessory use.
Review patterns also suggest the braided cable design feels flexible and “premium” in day-to-day handling. At the same time, buyer-review evidence is limited on long-term durability in every use scenario, so it is reasonable to treat it as a practical accessory for typical home, studio, or desk use rather than something you would abuse like a heavy-duty industrial tether.
What this cable actually does (and where it fits)
This is a Lightning extender with an 8-pin connection, meant to sit between your iOS device and a Lightning accessory or cable. The “full function” claim translates to supporting more than just power, including data use cases. In practical terms, that can mean compatibility with Lightning adapters such as lightning-to-3.5mm audio adapters, Lightning ethernet adapters, and other Lightning-based accessories that require the Lightning port.
Compatibility you should verify before buying
It is intended for Lightning socket iPhones and iPads. The supported lineup includes iPhone 14 and iPhone 13 series, iPhone 12 series, iPhone 11 series, iPhone XS and XR, and iPhone 8 through iPhone 5 models. It also lists support for iPad Pro 10.5 (2017) and iPad Pro 12.9 (2015, 2017), plus iPod models with a Lightning connector.
If your device uses USB-C (for example, many newer iPad models and some iPhones), this will not be the right connection type.
Connection order on iOS devices is the big “gotcha”
This extender includes specific guidance for iOS device detection. The workable approach is to connect the extension cable to the peripheral or accessory first, then plug the other end into the iPhone or iPad. If you plug into the phone first and then attach the accessory, detection may fail.
That detail matters if you plan to swap accessories often, because it affects how quickly you can get going after changes.
Charging speed and data expectations
When used for charging, charging speed can drop compared with plugging in directly. The expected reduction is around 10% to 20%. For data transmission, it is positioned as having almost no negative effect.
So if you need the fastest possible charging, you might prefer charging directly. If you primarily need extra cable length for positioning while still charging, this can still be a practical solution.
Build quality, flexibility, and cable handling
The cable uses a braided design with a TPE jacket and a reinforced terminal structure intended to handle stress at the Lightning connector area, which is typically where extenders experience the most wear. The jacket is also described as suitable for very cold temperatures (down to -50°C) without cracking, and the internal construction is built around tinned copper conductors.
For buyers, the most relevant takeaway is the combination of a flexible braid and a strengthened connector section, which generally improves day-to-day usability when you are moving your phone or routing the cable around a stand.
Who should buy it
- People who need a short Lightning extender because their current Lightning cable is too short for a phone stand, charging nook, or studio mount.
- Buyers who want to charge or connect accessories without removing a protective case (the output end is described as slim enough for most waterproof cases).
- Those using Lightning accessories that rely on data and audio/video functions, not just power.
- Shoppers with older Lightning iPhone and iPad models who prefer a compact extender over replacing an entire accessory or cable.
Who should skip it
- If you want maximum charging speed and never need extra length, a direct cable may be the better choice.
- If you frequently hot-swap accessories and hate any extra connection-order steps, the iOS detection requirement may feel inconvenient.
- If you are trying to extend a connection for non-Lightning devices, double-check your port type first.
Price and availability
The price can vary, but it is positioned as an affordable, small upgrade compared with replacing higher-cost devices or specialized accessory cables. Availability may be limited at times, so if this fits your exact iPhone or iPad setup, it can be worth checking stock status before you wait.
Bottom line verdict
The AGVEE 1ft Lightning Extension Cable is a good match when you need a small amount of extra reach for Lightning charging and accessory use, especially if you are working around phone cases and desk or studio positioning. The main tradeoffs are the required connection order on iOS and a modest charging speed reduction. If those two points are acceptable for your use, it is a straightforward way to make your existing setup more usable.
FAQ
Is this compatible with iPhone 14, iPhone 13, and iPhone 12?
Yes. It is listed as compatible with iPhone 14, iPhone 13, and iPhone 12 series Lightning models.
Does it support data transfer or just charging?
It is designed for both charging and data functions, and it is intended to work with Lightning accessory use cases beyond power.
Will charging be slower with this extender?
Charging speed can be reduced by about 10% to 20% when used for charging, compared with plugging in directly.
Do I need to connect it in a specific order on iOS?
Yes. To help with iOS detection, connect the extension cable to the accessory/peripheral first, then plug the extender into the iPhone or iPad.
Will it work with phone cases, including waterproof cases?
The design is described as slim enough to compatible with most waterproof cases, so you can typically charge without removing the case.
How long is the cable?
It is a 1-foot Lightning extension cable.
Specifications
| Product Title | AGVEE 1ft Lightning Extension Cable, Braided Female to Male Extender Full Function Cord Compatible with iPhone iPad, Data Sync Video Audio & Charging Connector Adapter, Dark Gray |
|---|---|
| Category | Electronics > Computers & Accessories > Tablet Replacement Parts > Flex Cables |
| Brand | AGVEE |
| Manufacturer | AGVEE |
| Color | Dark Gray |
| Connector Type | Usb |
| Cable Type | USB |
| Compatible Devices | iPad Pro 10.5 (2017) [A1701 A1709 A1852] iPad Pro 12.9(2015 2017) [A1584 A1652 A1670 A1671 A1821], iPhone 11 Pro Max, 12 Pro, 12 [A2342 A2410 A2412 A2411 A2341 A2406 A2408 A2407 A2172 A2402 A2404 A2403], iPhone 13 12 Pro Max A2160 A2217 A2215 A2161 A2220 A2218 A2111 A2223 A2221, iPhone xs xr x 8 7 6 5, iphone 14 13 Pro max |
| Other Special Features of the Product | Data |
| Compatible Phone Models | iPhone 5, iPhone 6, iPhone 7, iPhone 8, iPhone X, iPhone XR, iPhone XS, iPhone 11, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 14, iPad Pro 10.5 (2017), iPad Pro 12.9 (2015, 2017) |
| Connector Gender | Male-to-Female |
| Number of Pins | 8 |
| Maximum Voltage | 5 Volts (DC) |
| Recommended Uses For Product | Data Transfer, Charging |
| Specification Met | UL |
| Indoor Outdoor Usage | Indoor |
| Brand Name | AGVEE |
| Model | CLEX-GBB30 |
| Item Length | 1 Feet |
| Part Number | CLEX-GBB30 |
| Unit Count | 1.0 Feet |
| Special Feature | Data |
Available variants
Size
- 3.3ft
- 1ft
- 3.3ft+3.3ft
- 6.6ft
- 1ft+1ft
- 4 inch+4 inch
Color
- Dark Gray
- Black
Recommended next
Tab A9+ 11.0 X210 USB Charging Port Flex Cable Replacement
The Tab A9+ 11.0 X210 USB Charging Port Flex Cable Replacement is a niche repair part made for Samsung Galaxy Tab A9+ 11.0 (SM-X210, Wi‑Fi). It’s designed to restore a loose, damaged, or non-working USB Type-C charging port, and buyers report a good fit and straightforward charging-port fixes, with one common caveat: screen access and adhesive removal can be the hardest part.
Dock Connector for Samsung Galaxy Tab A9 Plus Charging Port Flex Cable
A replacement USB charging port flex cable for the Samsung Galaxy Tab A9 Plus (11-inch, X210). It’s designed for DIY repairs when the dock connector, charging, or USB data connection becomes unreliable, but expect a careful screen removal and verify tool fit before starting.
Ear Speaker Sensor Proximity Light Flex Cable Incl Mic Replacement for iPhone 13
A purpose-built flex cable replacement designed to restore proximity sensor related behavior on the iPhone 13 (6.1-inch). It installs without soldering, but flex parts can be delicate, and review evidence is mixed, so fit and careful installation matter.