A1484 A1474 Tablet Battery Replacement for iPad 5th 6th 7th 8th 9th Generation
Quick take
This replacement battery is built for select iPad models that use A1484 or A1474 battery part compatibility, spanning iPad 5 through iPad 9 and iPad Air 1. It can be a good DIY option if you are comfortable with a careful, heat-assisted screen and connector reassembly process. The main catch is that installation is fiddly and time-consuming, and success depends heavily on your tools and patience.
Pros and cons
Pros
- Specific electrical specs listed (3.73V, 8827mAh, 32.9Wh) to help you match the right replacement.
- Compatibility includes multiple iPad 5th-9th gen and iPad Air 1 models, with guidance to verify your iPad model number.
- Battery includes safety protections described (over-charge, over-discharge, short-circuit) and is stated to be tested before shipping.
- Supports DIY repair by providing the battery (1 unit) for the repair job.
Cons
- DIY installation is difficult, commonly requiring 2 to 3 hours and a heat source to release the screen adhesive safely.
- Included tools may not work well for every repair setup, and tiny screws are easy to mishandle.
- You may also need extra items for the job, such as screen adhesives, beyond the battery itself.
What buyers think
Buyer-review evidence is limited, but the available feedback centers on two themes: fit and install difficulty. Reports describe the battery fitting the iPad housing correctly and aligning well with the power connector once the device is opened. At the same time, multiple comments emphasize that replacing the iPad battery is not a quick swap, it involves heat, careful separation of the screen, and meticulous handling of small components and cables. Overall sentiment suggests the battery performs well when the installation is done carefully, but success is highly dependent on repair experience, tools, and patience.
Battery specs and what they mean for compatibility
For replacement parts, the electrical match matters. This battery lists:
- Voltage: 3.73V
- Capacity: 8827mAh
- Wattage: 32.9Wh
It’s also described as a lithium-ion rechargeable cell. When choosing a replacement, use these specs plus your exact iPad model number, since the housing and connector placement have to line up correctly for a safe, working repair.
Compatibility: which iPads this battery is meant for
This battery is marketed for iPad models that align with the following compatibility list. Before buying, check the model on the back of your iPad, since iPad model numbers vary even when the external design looks similar.
- iPad Air A1474, A1475, A1476
- iPad 5th Gen: A1822, A1823
- iPad 6th Gen: A1893, A1954
- iPad 7th Gen: A2197, A2200, A2198, A2199
- iPad 8th Gen: A2270, A2428, A2429, A2430
- iPad 9th Gen and related: A2602, A2603, A2604
The associated part numbers are listed as A1484 (and a referenced compatible code of 6712-6700). If you are unsure, double-check your iPad’s model identifier before committing to the purchase.
Installation is the real decision factor
With iPad battery replacements, the battery itself is only half the story. The other half is accessing the battery safely (typically involving heat to loosen adhesive and careful cable handling). The most consistent buyer takeaway is that this is a multi-step repair, not a quick DIY task.
- Plan on time and a heat source. Some buyers report spending roughly 2 to 3 hours, and describe the adhesive release as the challenging part.
- Expect very small hardware. Tiny screws and delicate steps can slow you down, and mishandling can cause setbacks.
- Think about what else you might need. Screen adhesives may be required for a complete repair, so budget for additional materials if they are not already part of your setup.
Who this suits: people who have already repaired electronics, understand iPad internal layouts, and can follow careful, model-specific teardown guidance.
Who should avoid DIY here: if you lack the right tools, are uncomfortable working with adhesive and fragile connectors, or prefer having the device professionally serviced.
Safety and durability considerations
The battery is described as having built-in protection features (over-charge, over-discharge, and short-circuit protection). It is also stated to be tested prior to shipping, and it references compliance labeling such as CE/FCC/RoHS. While these are positive signals, your safety during the repair still depends on correct installation, avoiding damage to cables, and using appropriate precautions for working with lithium-ion cells.
Pros and cons recap
Best for
- Replacing a worn or unstable iPad battery for models that match the listed compatibility IDs.
- DIY repairers who are comfortable with heat-assisted screen access and careful reassembly.
- Buyers comparing replacement batteries and prioritizing listed voltage and capacity specs.
Not ideal for
- People who want a simple plug-and-play swap, because the iPad teardown is complex.
- Anyone without fine tools and patience, especially for handling tiny screws and connectors.
- Shoppers who are not prepared to buy extra materials such as replacement adhesives if needed.
Price and availability
The listing shows a current price and also indicates limited stock (“Only 6 left in stock”). If you are ready to repair soon, it may be worth checking the latest price and availability before you start gathering your tools and additional supplies.
FAQs
Which iPad models are compatible with this battery?
It’s listed for iPad Air models with A1474/A1475/A1476 and iPad 5th through 9th generation models with model numbers including A1822/A1823, A1893/A1954, A2197/A2200/A2198/A2199, A2270/A2428/A2429/A2430, and A2602/A2603/A2604. Confirm your model number printed on the back before purchasing.
What are the key battery specs I should match?
The battery lists 3.73V, 8827mAh, and 32.9Wh. Those values are important when matching a replacement, but you should still rely on the model and part-number compatibility to ensure the physical fit and connector alignment.
Is this a simple DIY swap?
No. Buyer feedback consistently points to a challenging, time-consuming install that involves heating adhesive and careful handling of small screws and connectors. If you are not comfortable with iPad repairs, a professional service is often the safer choice.
Do I need extra parts besides the battery?
Many battery replacements require additional materials for reassembly, especially screen adhesives. Reviews also note needing more than just the battery for a successful repair, so plan accordingly.
Does it include tools for the repair?
The listing mentions that tools are packaged with the battery. However, some buyers report that the included toolset may not be ideal for working with tiny screws, so consider whether you have a reliable repair tool set already.
Specifications
| Product Title | A1484 A1474 Tablet Battery Replacement for iPad 5th 6th 7th 8th 9th Generation A1822 A1823 A1893 A1954 A2197 A2198 A2200 A2270 A2428 A2429 A2430 A2602 A2603 A2604 A1474 A1475 for iPad 5/6/7/8/9/Air 1 |
|---|---|
| Category | Electronics > Computers & Accessories > Tablet Replacement Parts > Batteries |
| Brand | MULS |
| Manufacturer | MULS |
| Model Name | A1484 |
| Model Number | A1484 |
| Item Weight | 50 Grams |
| Number of Batteries | 1 Lithium Ion batteries required. (included) |
| UPC | 765951777868 |
| Warranty Description | 12 Months |
| Battery Cell Type | Lithium Ion |
| Battery Capacity | 8827 Milliamp Hours |
| Voltage | 3.73 Volts |
| Reusability | Rechargeable |
| Amperage | 1 Amps |
| Compatible Phone Models | Fit for iPad (5th generation)/iPad (6th generation)/iPad (7th generation)/iPad (8th generation)/iPad (9th generation)/iPad Air(just for Air 1) |
| Unit Count | 1.0 Count |
| Battery Weight | 0.6 Pounds |
| Antenna Location | Tablet |
| Battery Cell Composition | Lithium Ion |
| Recommended Uses For Product | Tablet |
Available variants
Size
- 10.04*5.83*0.98 in A1484
- 6.50*4.41*0.79 in A1512
- 8.86*6.50*1.18 in A1664
- 12.80*6.85*1.18 in A1577
Recommended next
Replacement Battery for Microsoft Zune 80gb 120gb 2nd Gen 850mAH (Battery ONLY)
A battery-only replacement for Microsoft Zune 80GB and 120GB (2nd Gen) that targets dead or failing units. It uses an 850mAh Li-ion cell (3.7V), and while the install can be fiddly because the battery is soldered, buyers report it can bring a non-working Zune back to life.
for iPad 7 | 8 | 9 (7th Gen | 8th | 9th) Battery Replacement A1484 Premium Kit (A2197 A2198 A2200 A2270 A2428 A2429 A2430 A2602 | A2603 | A2604 | A2605) + Tools + Adhesive
This iPad battery replacement kit is designed for 10.2-inch iPad 7th, 8th, and 9th gen models and includes a pre-installed battery adhesive plus a tool bundle to help with an at-home repair. The main tradeoff is that battery replacements are detail-sensitive, and some buyers report issues if the battery is defective or if the install does not go smoothly.
Dinow A1484 Battery Replacement Kit for iPad Air 1 iPad 5th 6th 7th 8th 9th Generation
The Dinow A1484 battery replacement kit is a one-battery Li-ion polymer pack intended for iPad Air 1 and specific iPad 5th through 9th generation models. Reviewers report it can restore basic day-to-day runtime after a failing or swollen battery, but DIY success depends heavily on careful disassembly since tools are not included.
DGFTB A1484 Tablet Battery for iPad Air(A1474 A1475 A1476)
DGFTB’s A1484 replacement battery is designed for specific iPad Air and iPad (5th to 8th gen) models, offering a 3.73V, 32.9Wh/8827mAh capacity pack with built-in protection. It’s a budget-friendly option for buyers comfortable installing a replacement battery, but fitment must be verified carefully because some A-models are excluded by design.