6 Pack Desk Grommet 2 Inch (50 mm) Bi-Metal Hole Saw Kit (Cable Sleeve Organizer)

Quick take

This kit combines six 50 mm desk cable grommet inserts with a 2 m cable sleeve organizer and a 50 mm bi-metal hole saw setup, making it practical for DIY desks and tables where you want cables to disappear through a clean round opening. Buyers tend to like the finished look and fit of the inserts, but cutting clean holes depends on drilling technique and steady control.

Pros and cons

Pros

  • Includes the key pieces to install: 50 mm bi-metal hole saw blade with drill bit, plus a hex key
  • Designed for a tidy desk build, with grommets that create a clean, finished look around the hole
  • Includes a 2 m cable sleeve and is intended to help route and bundle cables under or through the desk
  • ABS plastic grommets for long-lasting day-to-day use

Cons

  • Hole cutting quality can be inconsistent if you rush, use too much pressure, or drill at the wrong speed
  • The hole saw blade is not universally loved, with some buyers feeling it is less strong than expected for the cutting bit

What buyers think

Reviewed productBuy on Amazon

Buyer feedback centers on two themes: the inserts fit well and the end result looks more polished than an uncovered desk hole. Several reviews describe using the included hole saw to get a clean round cut and then getting cables routed more easily with the cable sleeve. There is also limited but notable feedback that the cutting bit may not meet expectations for everyone, even though the overall package is still seen as good value for small projects.

Who this kit is for

This is a good match if you want an organized desk setup and you are comfortable doing basic DIY installation, especially if your goal is to route power cords, monitor cables, or other desktop leads through a dedicated opening with a finished grommet insert.

  • Best for: people building or upgrading desks, end tables, or workstations who want a neat, rounded cable pass-through (50 mm hole size).
  • Great for: cable runs that need to be bundled and managed underneath the tabletop using a cable sleeve.
  • Works well when: you can measure and mark hole location carefully and drill slowly for a clean edge.

Design and compatibility basics

The key compatibility factor is the hole size: these grommets are made to fit 2 inch (50 mm) openings. The kit includes a 50 mm M42 bi-metal hole saw blade with drill bit and additional small hardware to help with installation.

For the cable management portion, you get a 2 m cable sleeve organizer sized for bundling cables going under the desk or to a pass-through opening. The grommets are ABS plastic, which is aimed at durability for frequent desk use.

Installation flow (and where things can go wrong)

Reviewed productBuy on Amazon

Installation is straightforward in concept: drill the correct-size hole in your tabletop, install the grommet into the opening, then use the included sleeve to bundle and guide cables.

Where you will make the difference: buyers who report clean results often take their time with drilling. Expect that your technique matters, particularly for avoiding splintering and keeping the hole edge smooth.

  • Mark the hole location accurately before drilling.
  • Drill slowly and maintain steady pressure.
  • After the cut, install the grommet to create the finished look and then route/bundle cables with the sleeve.

Pros and cons in plain English

Pros

  • Finished look: the inserts help cover a raw desk cutout for a cleaner appearance.
  • Complete kit for a common task: you get the grommets, hole saw components, and a cable sleeve in one bundle.
  • Useful for cable bundling: the sleeve helps reduce loose cable hanging and makes cable routing more organized.
  • Material choice: ABS plastic is used for the grommets, supporting everyday durability.

Cons

  • Drilling execution affects results: clean, smooth holes depend on careful drilling, slow speed, and steady pressure.
  • Cutting bit expectations vary: some buyers feel the hole saw blade part is not as strong as they hoped, though the overall kit is still considered worth it by several reviewers.

Price and availability

This kit is positioned as a low-cost DIY bundle, with a listing price shown below the typical higher list price. Availability is currently marked as in stock, so it may be a convenient option when you are trying to finish a desk build without sourcing separate components.

Buy on Amazon

Verdict

If you are installing a desk cable management solution that requires 50 mm (2 inch) pass-through holes, this kit is a practical, all-in-one option. The most convincing buyer-driven advantages are the fit and tidy finished look of the grommets and the included cable sleeve that helps bundle and route cables. Just be prepared to drill carefully, because the quality of the hole you end up with is a major driver of how “clean” the installation will look.

FAQ

What size desk hole do these grommets fit?

They are designed for 2 inch (50 mm) holes.

Does this kit include the hole saw bit?

Yes. It includes a 50 mm M42 bi-metal hole saw blade with drill bit and a hex key for installation.

How long is the cable sleeve organizer?

The included cable sleeve is 2 m in length.

Is it easy to get a clean hole in wood?

It is doable, but drilling technique matters. For the smoothest results, drill slowly and keep steady pressure to avoid rough edges or splintering.

Is the kit worth it if I only need one hole?

The kit includes six grommets, so it is most cost-effective if you plan multiple pass-throughs (for example, a built workstation or several cable routes). If you only need a single grommet, a smaller quantity option may be a better fit.

Specifications

Product Title6 Pack Desk Grommet 2 Inch (50 mm) Bi-Metal Hole Saw Kit | 2 m Cable Sleeve Organizer, ABS Plastic, Countertop, Desktop,Table Hole Cover
CategoryElectronics > Accessories & Supplies > Cord Management > Cable Sleeves
BrandBicafa
ManufacturerBicafa
ColorBlack
MaterialPlastic
Product Dimensions2.48"L x 1.97"W
Number of Pieces6
UPC739713398127
Unit Count6.0 Count
Warranty Description1 year manufacturer
Enclosure MaterialPlastic
Item Dimensions L x W2.48"L x 1.97"W
Installation TypeDIY
Style NameModern
StyleModern

Recommended next