6.35mm 1/4 inch Male Plug Stereo to 2 Dual 1/4 "TRS Female Jack Connector Audio Speaker Cable, Y Splitter Adapter Cable (20CM / 8Inch)
Quick take
This 6.35mm (1/4 inch) stereo TRS Y-splitter cable takes one male stereo plug and duplicates it into two 6.35mm female TRS jacks, which can be useful when you want two headphones or two endpoints playing the same stereo signal. It uses fully molded construction with EMI/RFI shielding and gold-plated connectors for corrosion resistance. The key catch: it is a splitter only, it cannot combine two outputs into one input.
Pros and cons
Pros
- Splits one stereo 6.35mm TRS output into two 6.35mm TRS female jacks.
- Fully molded and shielded for EMI/RFI interference resistance.
- Gold-plated connectors help resist corrosion and support stable connections.
- Short 20cm (8 inch) cable length is convenient for desk and rack-adjacent setups.
Cons
- Not designed to combine two signals into one, it is strictly split-only.
- Only as useful as your gear’s 6.35mm TRS compatibility, it will not adapt other plug types.
What buyers think
Buyer-review evidence is limited in detail, but the recurring themes are straightforward. People generally report that the cable works as described for splitting one stereo connection to two devices, and they like that it solves the “single output, two headphones” setup problem. Several comments also point to solid overall quality for the price and mention practical use in setups like audio and recording environments. Overall sentiment centers on functionality and value, with no clear recurring pattern of hardware failure described in the available snippets.
What this cable is for
This Y-splitter is built for one common job: duplicating a stereo signal. It uses a 6.35mm (1/4 inch) male plug on one end and provides two separate 6.35mm (1/4 inch) female TRS jacks on the other end. That means you can plug two compatible devices in parallel to receive the same left/right stereo mix.
Typical use cases include sharing a headphone/line output between two headphones, or sending the same stereo feed to two destinations where duplication is what you want.
Key specs that matter in real setups
Split-only design
The most important limitation is also the simplest to remember: it splits one stereo output into two outputs. It does not combine two outputs into one input, so if your goal is routing two sources into a single input, you will need a different type of cable or adapter.
Shielding and connector choices
The cable is described as fully molded and shielded to help prevent EMI/RFI interference. It also uses gold-plated connectors, which are typically chosen for better corrosion resistance and reliable contact over time. These features matter most in setups with lots of nearby electronics, or when you care about keeping noise low.
Length and placement
At 20cm (8 inches), it is best for short runs, like from a headphone jack or audio device port to two nearby headphone positions, or within a compact desk or studio layout.
Pros and cons for different buyers
Best for
- Anyone with a single 6.35mm TRS stereo output who needs to feed two 6.35mm TRS devices.
- Headphone-sharing situations (for example, two listeners using two separate headphone plugs).
- Studio or home recording setups where you want a short, split-only adapter cable.
Who should avoid it
- Buyers who need a combiner (two outputs into one input), since this cable is split-only.
- Those whose devices use different connector types (for example, 3.5mm headphone plugs) and would prefer a universal adapter solution.
- Anyone needing a long run, since this one is designed for a short 20cm connection.
Is it worth it?
If your goal is simple and compatible, it usually makes sense. When you have one 6.35mm stereo TRS jack and you want two devices to play the same stereo signal, a splitter cable like this can clean up cabling and reduce the hassle of swapping plugs. The value proposition is strongest when your setup fits its requirements: 6.35mm TRS compatibility, short distance, and split-only signal flow.
On the other hand, if you need to combine signals, extend far beyond a short distance, or adapt mismatched plug types, you will likely get better results with a different adapter category.
Alternatives to consider
If you need to combine instead of split
Look for a solution designed for summing or combining inputs, since a Y-splitter will not accomplish two-source mixing into one input.
If your devices use different plug sizes
Consider a dedicated 3.5mm to 6.35mm adapter (or the appropriate conversion) paired with a splitter only if you truly need two endpoints. This keeps the cable chain compatible end-to-end.
If you need a longer run
Choose a splitter option with the length you need to avoid pulling strain on connectors and to keep the cable where it will not get tugged.
FAQs
Does this cable combine two outputs into one?
No. It duplicates one stereo output into two 6.35mm female TRS jacks. It is not designed to combine two signals into one input.
What connectors does it use?
It has a 6.35mm (1/4 inch) male stereo TRS plug on one end and two 6.35mm (1/4 inch) TRS female jacks on the other end.
How long is the cable?
The cable length is 20cm (about 8 inches).
Is it meant to reduce noise?
It is described as fully molded and shielded (EMI/RFI shielding), which can help resist interference in typical audio setups.
Is it suitable for headphones?
It is intended to adapt a 6.35mm stereo output for use with devices like headphones, as long as your headphones and connections use 6.35mm TRS plugs.
Ready to check pricing for your setup? Buy on Amazon
Specifications
| Product Title | 6.35mm 1/4 inch Male Plug Stereo to 2 Dual 1/4 "TRS Female Jack Connector Audio Speaker Cable, Y Splitter Adapter Cable (20CM / 8Inch) |
|---|---|
| Category | Electronics > Home Audio > Home Audio Accessories > Cables > Stereo Jack Cables |
| Brand | SiYear |
| Manufacturer | CHSM |
| Model Name | 4330401920 |
| Color | 6.35M-TRS-2x6.35F |
| Connector Type | RCA |
| Cable Type | Balanced |
| Compatible Devices | Speaker |
| Other Special Features of the Product | EMI/RFI Shielding, Gold Plated Connectors |
| Compatible Phone Models | Compatible with smartphones, specific models not listed |
| Ethernet Cable Category | Cat 5 |
| Connector Gender | Male-to-Female |
| Number of Pins | 2 |
| Recommended Uses For Product | Adapting headsets to audio devices, Splitting stereo signals into two |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Unit Count | 1 Count |
| Number of Items | 5 |
| Outer Material | Plastic/Rubber |
| Brand Name | SiYear |
| Customer Package Type | FFP |
| Model | 4330401920 |
| Item Length | 6 Inches |
| UPC | 734010037021 |
| Part Number | 4330401920 |
| Item Shape | Round |
| Special Feature | EMI/RFI Shielding, Gold Plated Connectors |
Available variants
Size
- 6.35M-3.5F-2PACK
- 6.35M-2x6.35F(2pack)
- 6.35F-3.5M-2PACK
- 6.35M-TRS-2x6.35F
- 6.35-TRS-2RCAM
Recommended next
(Apple MFi Certified) iPhone AUX Cord,Lightning to 1/8 Inch Audio Cable,3.3ft, Headphone Jack Adapter Male Aux Stereo Audio Cable Compatible for iPhone 14/13/12/11/XR/X/8/7 (White)
This 3.3 ft Lightning-to-3.5mm (1/8-inch) AUX cable is designed to let you connect compatible iPhones to car stereos, speakers, and headphone jacks without needing a separate adapter. It focuses on MFi compatibility, a flexible design, and plug-and-play use, but buyer-review evidence includes mixed quality experiences, so it’s best for straightforward AUX output needs.
J&D 3.5mm to 1/4 Headphone Adapter Cable, Gold Plated Audiowave Series 3.5mm 1/8 inch Female TRS to 6.35mm 1/4 inch Male TRS Stereo Audio Cable for Mixer Guitar Piano Amplifier Speaker, 9FT
The J&D 3.5mm to 1/4 headphone adapter cable (9 ft) is a straightforward way to connect devices with a 3.5mm headphone output to gear that uses a 6.35mm (1/4 inch) stereo TRS input. It focuses on a simple plug-and-play connection, with oxygen-free copper conductors, gold-plated connectors, and multi-layer shielding to help reduce interference for clearer audio.
Cable Matters 2-Pack Headphone Extension Cable - 10ft, 3.5mm Extension Cable, Aux Cord Extender, Black
The Cable Matters 2-Pack 3.5mm headphone extension cable is a simple, flexible way to add reach between your headphones (or aux device) and a laptop, PC, smartphone, or in-car audio jack. It’s a good fit when you need extra cable length for comfort and convenience, with durability-focused build details like a braided jacket and gold-plated connectors.
2-Pack 3.5mm to 2.5mm Aux Audio Cable (5FT)
A budget-friendly 2-pack of braided 5-foot AUX cables for headphones that use a 2.5mm jack. Built for secure 3.5mm-to-2.5mm connections, with tangle-resistant nylon braiding and a gold-plated copper core design. Best for buyers replacing a lost cable and anyone who wants a longer reach for home or travel.