5 MP CCTV Security Camera Tester, 5" AHD TVI CVI CVBS CCTV Analog Video PTZ Control & Cable Tester (HDMI input)
Quick take
This handheld CCTV tester is designed for field installers who need to verify common surveillance video types, including 5 MP TVI and AHD HD coaxial cameras, 4 MP CVI coaxial cameras, plus analog CVBS. It also supports audio input testing, UTP/BNC cable checks, and RS485 PTZ control (PELCO-D/P), with a 5-inch display for on-site troubleshooting.
The main buying caveat is that buyer-review evidence is limited, so it is smart to double-check your required signal formats, resolutions, and control protocol needs before purchasing.
Pros and cons
Pros
- Supports multiple camera signal families for testing, including TVI, AHD, CVI (and CVBS analog).
- 5-inch screen built into a handheld form factor for quick connection checks on site.
- Includes audio input testing plus a 12V DC output to help power cameras during troubleshooting.
- Built for cabling and control work, with UTP/BNC cable testing and RS485 PTZ control (PELCO-D/P).
Cons
- Reviewer feedback is limited in volume, so patterns on long-term reliability and edge-case behavior are hard to confirm.
- Some HDMI/VGA input behavior requires using the menu to select the correct input mode (VGA mode selection is mentioned).
- PTZ cable testing distance is specified broadly, so real-world performance may vary by run and cable quality.
What buyers think
Buyer-review evidence for this tester is relatively limited, but the feedback that is available is generally consistent on practical use. Multiple comments indicate it performs as expected for installers needing a monitor-style tool to check connections and service CVI or similar analog video systems. Reviewers also describe the display/monitor function as working normally and note overall satisfaction with results during setup and troubleshooting.
There are no strong, recurring reports in the available review snippets about major feature failures, but one review mentions an accessory cable connector issue (BNC end coming off) and describes it as a minor inconvenience rather than a systemic defect. Overall, the evidence suggests it can be a useful service tool for connection verification, with buyer-review patterns still not extensive enough to fully characterize durability over time.
How this CCTV tester helps during installation and service
When you are troubleshooting security systems, the fastest path to an accurate diagnosis is being able to confirm three things at the worksite: video signal type, audio presence (when your camera supports it), and cabling integrity. This handheld unit is built around those workflows. It combines a built-in 5-inch display with multi-format camera testing and supporting inputs, so you can validate feeds without hauling a full bench setup.
Video signal testing: TVI, AHD, CVI, and analog CVBS
The tester is targeted at coax HD and classic analog systems. It is specified to support 5 MP TVI and AHD HD coaxial camera testing, 4 MP CVI high-definition coaxial camera testing, and it is compatible with CVI/TVI/AHD coax resolutions listed as 720p, 960p, and 1080p. It also supports CVBS analog camera testing.
It can automatically identify video formats and switch tests as part of its camera testing behavior. That matters in the field, because it reduces the amount of manual mode switching you need while verifying whether a camera is outputting the expected signal.
HDMI/VGA troubleshooting input and display
In addition to testing cameras over the coax connections, it supports digital input so you can route a different video source into the tester. The unit supports 1080p HDMI input and also supports VGA input. VGA mode requires using the selector/menu to choose VGA mode, and the supported VGA resolutions are listed as 1024×768 and 1280×1024.
Audio test and camera power output
If your installations include cameras with audio, this tester includes an audio signal input test to help verify sound is normal. It also includes a DC 12V output, which can supply power to the camera during troubleshooting. That can reduce dependency on a separate power source when you are testing a camera at the junction box or during initial commissioning.
PTZ control and cable testing
For systems that use pan-tilt-zoom cameras, the tester includes RS485 PTZ control. It is compatible with PELCO-D and P protocols and supports a baud rate range listed as 1200 to 115200 bps. It also supports UTP cable and BNC cable testing with indicator light guidance.
UTP/BNC testing and PTZ control can help you confirm that both the video path and the control wiring are behaving correctly, which is a common cause of “camera is powered but won’t respond” troubleshooting loops.
Battery life and portability
The tester is battery powered with a long-life lithium-ion polymer battery. Charging time is listed as about 4 hours for normal use. There is also a USB 2.0 interface that provides 5V/1A emergency power output, described as being usable for Android phones.
For field work, the provided travel bag and included wrist band reinforce the intended use case: carrying the tool comfortably between jobs.
Pros and cons for the right buyer
Best for
- Installers and service technicians troubleshooting TVI, AHD, CVI, and CVBS camera systems.
- Work that requires both video verification and quick cabling checks (UTP/BNC).
- Jobs that include audio-enabled cameras and RS485 PTZ devices (PELCO-D/P).
- On-site commissioning where you want a compact 5-inch tester instead of a full monitor setup.
You might want to look elsewhere if
- You need extensive buyer feedback and long-term reliability proof, since review evidence is limited.
- Your workflow depends on inputs and mode switching that are not well aligned with HDMI/VGA selection requirements.
- You plan to use it primarily for non-coax workflows or formats outside the listed TVI/AHD/CVI/CVBS testing targets.
How it compares by feature priorities
Without naming specific brands, you can judge alternatives using these categories:
- Multi-format signal support: prioritize testers that explicitly cover TVI, AHD, CVI, and analog CVBS if your client base includes mixed systems.
- On-board display: a built-in screen saves time versus tools that require an external monitor.
- Control and cabling tools: if you routinely service PTZ and need RS485 control plus UTP/BNC indicators, choose a tester that includes those functions.
- Inputs for troubleshooting: HDMI/VGA input support can be valuable when you need to compare signals from a different source.
If you mainly troubleshoot analog only, you may find lower-cost testers that focus narrowly on CVBS. If you routinely work with HD-over-coax formats and PTZ, this style of all-in-one handheld unit tends to reduce your time per job.
Bottom line
The 5-inch handheld design, multi-format coax testing (TVI/AHD/CVI plus CVBS), and built-in support for audio input, UTP/BNC cable testing, and RS485 PTZ control are the core reasons to consider this tester. With limited review volume, it is best suited to buyers who want a practical field tool for common surveillance installation and service workflows and who can confirm their exact signal and control requirements match what it supports.
FAQ
What camera formats does this tester support?
It supports testing for 5 MP TVI and AHD HD coaxial cameras, 4 MP CVI high-definition coaxial cameras, and compatible 720p, 960p, and 1080p resolutions. It also supports CVBS analog cameras.
Does it have an HDMI input?
Yes. It supports HDMI input for video troubleshooting, including 1080p HDMI input.
Can it test audio signals?
Yes. It includes audio signal input testing to check whether audio is normal.
Is there power output for cameras?
Yes. It includes a DC 12V output that can provide camera power during testing.
Does it support PTZ control?
Yes. It offers RS485 PTZ control compatible with PELCO-D and P protocols, with a baud rate range listed as 1200 to 115200 bps.
Can it test network cables?
It supports UTP cable testing, and it also supports BNC cable testing with indicator lights.
How long does it take to charge?
Charging for normal use is listed as about 4 hours.
Specifications
| Product Title | 5 MP CCTV Security Camera Tester,5" AHD TVI CVI CVBS CCTV Analog Video PTZ Contorl &Cable Camera Tester with HDMI Interface（HDMI in）- 5900S |
|---|---|
| Category | Electronics > Camera & Photo > Video Surveillance > Installation Services |
| Brand | ANQIA |
| Manufacturer | Qisheng ltd |
| Power Source | Battery Powered |
| Style Name | 5900S |
| Brand Name | ANQIA |
| UPC | 753421462697 |
| Style | 5900S |
Recommended next
Triplett 8075 CamView IP Pro-X CCTV Camera Tester with PoE
The Triplett 8075 CamView IP Pro-X is a field-focused CCTV installation tester that combines IP camera network checks, SD/analog HD/HD over coax testing, and PoE power in one handheld unit with a 7-inch touchscreen. It is a strong all-in-one option for installers who need quick connectivity, audio/video signal checks, and common cable/PTZ controls, with the main tradeoffs being limited Wi‑Fi support details, occasional interface hangs, and buyer-fit questions around certain camera brands or firmware update expectations.
Triplett 8073 CamView IP Pro-D CCTV Camera Tester with Built-in DHCP Server
The Triplett CamView IP Pro-D (8073) is an all-in-one CCTV installation and troubleshooting tester for ONVIF IP cameras plus common analog HD standards (AHD 2.0, HD-TVI 3.0, HD-CVI 3.0). Its built-in DHCP server, IP/network test tools, and 1080P display are geared toward faster onsite setup, verification, and reporting.
Viking Electronics VK-VE-5X5 SURF MNT Box W1000/2000/3000
The Viking Electronics VK-VE-5X5 SURF MNT Box is a screw-in outdoor mounting box built from alloy steel with a powder-coated finish. Buyers praise its rugged, “vault-like” sturdiness and overall performance, but it can be pricey, so it is best for installers or homeowners who value durable hardware and match the box to their W1000/2000/3000 setup.
AAOTOKK Video Balun RJ45 to BNC Transceiver Transmitter HD-CVI/TVI/AHD/CVBS with DC Power Connector (4 Pairs)
AAOTOKK’s RJ45-to-BNC video baluns are designed to carry CCTV video over standard CAT5/CAT5E cabling while also using a DC power connection for camera systems. They’re a practical choice for installs that need cleaner, longer runs than coax, but they require correct RJ45 standard matching, proper power and distance planning, and they are intended for indoor use (with extra protection if you run them outdoors).