4G LTE 5G CBRS Antenna, 600-6000MHz Wide-Band, 10dBi SMA Male Connector, 2-Pack (eifagur)
Quick take
This 2-pack wide-band antenna is designed to improve 4G LTE, 5G, and CBRS cellular reception across 600–6000MHz. Buyers report stronger signal stability and fewer drops when used with compatible home internet setups, including some 5G fixed wireless and business internet gateways. The main catch is compatibility and placement, since antenna gains only help if your router and wiring support the SMA connections and the antennas are mounted well.
Pros and cons
Pros
- Wide frequency range (600–6000MHz) for flexible use across cellular bands.
- 10dBi gain rating aimed at better reception in weaker-signal areas.
- Universal SMA male connector designed to fit compatible cellular routers and modems.
- Includes two antennas, which can support MIMO-style setups where applicable.
Cons
- Performance depends on your specific carrier bands, device compatibility, and antenna placement.
- Limited review evidence is available beyond a small number of user comments.
What buyers think
Across the available review snippets, the consistent theme is that these antennas can make a noticeable difference when signal is weak. Several buyers mention improved stability, fewer connection drops, and better usable speeds after switching to these antennas for fixed wireless or home internet style use. There are also mentions that the build quality feels solid, and that the antennas can help enable connection where a device previously detected the network but struggled to stay online. Buyer-review evidence is still limited in volume, but the feedback cluster points toward “signal improvement that helps you get online” when the setup is compatible and properly installed.
Who this antenna set is best for
- People using fixed wireless home internet: If your gateway/router supports external antennas with an SMA male connection, this 2-pack is meant to improve reception and link stability.
- Buyers covering multiple bands or uncertain coverage: The 600–6000MHz wide-band design is intended to work across a broad range of cellular frequencies.
- Installers and tinkerers working with MIMO-ready gateways: Two antennas are included, which matters if your equipment supports dual-antenna configurations.
- Anyone trying to avoid a more expensive outdoor antenna build: Reviews suggest these can be a practical upgrade path when you want better reception without a complex setup.
Key features and what they mean for real-world use
Wide-band coverage (600–6000MHz)
A wide frequency range is helpful when you are not sure which bands your area is using, or when you want one antenna model to cover multiple cellular technologies. The 600–6000MHz spec suggests broader compatibility across 4G LTE, 5G, and CBRS-related deployments.
10dBi gain rating for weak-signal locations
The antenna is rated at 10dBi gain, which is aimed at improving signal strength for reception. In practical terms, this type of upgrade is most likely to help when your current setup struggles to maintain a stable connection indoors or at the edge of coverage.
SMA male connector for device compatibility
The antennas use an SMA male connector. This matters because many routers and modems use SMA ports for external antennas, but not all devices do. Before buying, confirm your gateway has matching SMA antenna inputs and that you are wiring to the correct ports (for example, any “MIMO” dual connectors your device may provide).
2-pack design for dual-antenna setups
Because this includes two identical antennas, it is positioned for configurations where you can use two external antennas (often associated with better throughput and stability in dual-antenna systems). If your device only supports one external antenna, you may not get full value from the 2-pack.
Pros and cons
Pros
- Broad band support (600–6000MHz) for flexible cellular use cases.
- 10dBi gain rating designed for stronger reception in challenging coverage areas.
- Universal SMA male connections, which are common on many external-antenna gateways.
- Two antennas included for dual-antenna and MIMO-style compatibility scenarios.
Cons
- Compatibility is everything, if your router does not accept SMA external antennas or needs a different connector type, this may not work for your setup.
- Real performance will vary by carrier band, tower distance, and how the antennas are mounted and oriented.
Setup tips that affect results
- Confirm port type first: Make sure your router or gateway has SMA male external antenna inputs.
- Mount higher if possible: Even with higher gain, antennas typically perform better with a clear line of sight or at least elevated placement.
- Consider orientation: Antenna direction can matter a lot for cellular links, so adjust and test if your device supports signal strength monitoring.
- Use the dual antennas correctly: If your device has two external antenna connectors, connect one antenna to each port rather than running both into a single input.
Verdict
If you have a compatible 4G LTE/5G fixed wireless gateway or router with SMA male external antenna ports, this 2-pack wide-band antenna set is a strong budget-oriented option to try when reception is weak. The buyer feedback themes point toward improved stability and fewer drops after switching. Just be careful about matching your device’s antenna ports and doing a good placement and orientation job, because the gain rating cannot overcome incompatible wiring or poor installation.
Price and availability
Check the current listing for the latest price and stock status using the link below.
FAQ
What frequencies does this antenna cover?
It is designed for a wide frequency range from 600MHz to 6000MHz.
Does it work with 4G LTE, 5G, and CBRS?
Yes, it is intended for use across those types of cellular networks, based on its broad 600–6000MHz coverage.
What connector type does it use?
It uses an SMA male connector, which needs to match your router or modem’s external antenna ports.
Why does this come as a 2-pack?
The 2-pack format is useful for dual-antenna or MIMO-style setups where your device supports two external antenna connections.
Will I get better speeds automatically?
Better speeds are possible when your current reception is weak and your device is compatible, but results depend on signal strength in your location and how the antennas are installed and oriented.
Is this suitable for indoor and outdoor use?
It is marketed for both indoor and outdoor applications, but your results will still depend on placement quality and environmental conditions.
Specifications
| Product Title | 4G LTE 5G CBRS Antenna, 600-6000MHz Wide-Band, 10dBi SMA Male Connector, 2-Pack,Eifagur |
|---|---|
| Category | Cell Phones & Accessories > Accessories > Signal Boosters |
| Brand | eifagur |
| Manufacturer | eifagur |
| Color | 5G Antenna |
| Product Dimensions | 1"L x 0.5"W x 8"H |
| AntennaDescription | Radio |
| Number of Items | 2 |
| Warranty Description | 2 |
| Unit Count | 2.0 Count |
| Number of Channels | 2 |
| Impedance | 50 Ohms |
| Maximum Range | 300 Feet |
| Item Dimensions L x W x H | 1"L x 0.5"W x 8"H |
| Antenna | Radio |
Recommended next
weBoost Home MultiRoom (model 470144) cell phone signal booster
The weBoost Home MultiRoom is a directional, FCC-approved booster designed to reduce dead zones and improve 4G LTE and 5G coverage across up to ~5,000 sq ft. It’s aimed at households with weak outdoor signal who want better call quality and faster data without relying on Wi‑Fi calling, and it works for multiple U.S. carriers, as long as your carrier’s bands are supported and the outdoor antenna can be pointed toward the tower.
Diaclara Magnetic Designed for iPhone 17 Pro Max Case Full
The Diaclara Magnetic Designed for iPhone 17 Pro Max case is a full-body, dual-layer bumper style cover with a built-in PET screen protector and MagSafe-compatible magnet ring. It’s positioned for drop protection and everyday durability, but it is not water resistant and some finishes can show dirt more easily.
Phonetone Cell Phone Signal Booster for Verizon and AT&T
A dual-band cellular repeater designed for Verizon and AT&T (bands 12/13/17) with AGC automatic gain control and high-gain antennas for up to about 4,500 sq ft of indoor coverage. It can help reduce dead zones when you have weak outdoor reception, but 5G support depends on your carrier’s 5G deployment in those bands and proper antenna placement.
weBoost Drive Reach Overland cell phone signal booster
The weBoost Drive Reach Overland is a rugged, off-road-focused booster designed to improve 5G/4G LTE coverage inside an overland vehicle when there’s at least some usable outside signal. It’s carrier-compatible across major U.S. networks and pairs a durable outdoor antenna with a versatile mounting setup, but it won’t create service where none exists, and results vary by carrier and signal conditions.