2 Pcs Wall Mount Phone Holder with 3M Adhesive Phone Stand with Data Cable Receiving Hole, Charger Remote Control Storage Box for Bedroom, Kitchen, Bathroom, Office (Black)
Quick take
This two-pack wall mount phone holder keeps a smartphone within easy reach while charging, with a built-in cable/data receiving hole. It also works like a small organizer for remotes and plugged-in accessories, which is especially useful in tight spaces like bedrooms, bathrooms, and campers. The main caveat is adhesive mounting, so it matters a lot that you apply it to a smooth, non-textured, properly prepared wall surface.
Pros and cons
Pros
- Two holders in the box, handy for bedside or multiple rooms.
- Universal fit for many phones (max compatible phone size listed as up to 6.5 inches).
- Built-in cutout for charging cables and a receiving hole for data cables.
- Can function as a small storage box for remote controls and cable/plugs organization.
Cons
- Adhesive mounting depends heavily on wall type and prep, and some buyers prefer stronger removable strips.
- Best results require a smooth, non-textured surface, not rough finishes.
- Not intended to be used on/off repeatedly after installation, since the holder is designed to be stuck to the wall.
What buyers think
Buyer-review evidence is limited in quantity but consistently points to a few decision themes. Many users describe the holders as doing the job for bedside or small-space phone placement, with the cable cutout making charging straightforward. Several shoppers specifically mention using the holders in campers or trailers, where the wall mount helps keep the phone accessible when space is tight. There is also at least some feedback that the included double-sided adhesive can be less reliable than expected unless installation directions are followed closely, and some shoppers swap in 3M Command-style strips for better control.
What this wall mount phone holder is for
This is a minimalist wall-mounted phone stand that’s meant to keep your phone positioned while you charge it. It includes a cutout area for running a cable, plus an opening designed to receive a cable connection (useful for keeping charging or connected devices neat rather than loose on a nightstand).
Beyond phone storage, the unit is also designed to function like a small storage box. That means you can park a remote or organize small accessories in the same spot, which can help reduce clutter in rooms where surfaces are limited.
Compatibility and fit details
The holder is designed to work with a wide range of phones, with an internal width of about 0.95 inch and an internal length of about 3.72 inches. The maximum compatible phone size is listed as up to 6.5 inches. That makes it a practical pick for smaller to mid-size phones, but you’ll want to double-check your phone’s dimensions (especially width and thickness) before installing.
Installation and mounting reality check
Installation is adhesive-based, with instructions to stick the holder to a dry, clean, smooth surface. You should also wait the recommended time before regular use so the adhesive can set properly. Buyers who had trouble described mounting separation after several days, which aligns with the general behavior of pressure-sensitive adhesives when the wall surface prep or surface type is not ideal.
If you expect to reposition often, or you want an easier-to-remove approach, some users report swapping the included adhesive strips for 3M Command-style removable strips. That’s not required, but it can be a useful workaround if you’re trying to reduce risk on walls you don’t want permanently fixed.
Pros and cons in real use
When it’s a good buy
- You want a simple way to keep your phone accessible next to a bed, desk, or in a camper/trailer.
- Your setup involves charging with a cable you can route through the holder’s cable cutout.
- You like the idea of combining phone storage with remote and plug/cable organization in one compact location.
When you should skip it
- Your wall is textured, rough, or not smooth enough for adhesive mounting. The product is intended for smooth, non-textured surfaces.
- You need frequent repositioning after sticking something down, since adhesive mounts can be difficult to move without leaving residue or risking a weak bond.
- Your phone is larger than the stated maximum compatibility size (up to 6.5 inches) or doesn’t sit securely within the internal dimensions.
Simple buying guide: how to choose the right wall phone stand
- Check your phone size: verify it fits within the internal measurements and the stated max phone size.
- Assess your wall surface: smooth, clean walls give adhesive mounts the best chance of staying put.
- Plan for cable routing: confirm your charging cable can reach and pass through the built-in cutout without tugging the holder.
- Decide if you want permanent mounting: adhesive wall mounts are convenient, but they are less forgiving if you later change your mind about placement.
Alternatives to consider
If adhesive reliability is your top concern, consider alternatives that don’t rely on pressure-sensitive tape, such as desk stands (simpler setup, no wall mounting) or mounts that use screws or non-adhesive clamping. If you want the “bedside organization” benefit, search for multi-device bedside chargers or wall charging organizers that include stronger mounting methods or adjustable holders.
Price and availability
This item is listed as a two-pack and is currently shown as in stock. For the most accurate current pricing and availability, check the live listing before ordering.
FAQs
How big of a phone will this wall mount holder fit?
It’s designed for universal compatibility with a listed maximum compatible phone size of 6.5 inches, and internal dimensions include about 0.95 inch internal width and about 3.72 inch internal length.
Does it work for charging with a cable?
Yes. The holder includes a built-in charging/data receiving opening so you can route a cable for charging while the phone rests in the stand.
What kind of wall surface is best for the adhesive?
Use it on smooth, non-textured surfaces. The wall should be dry and clean before applying the adhesive strips.
Can I remove or reposition it after mounting?
The design is intended for adhesive wall installation. Some users choose removable command-style strips instead of the included adhesive to make adjustments easier, but you should expect adhesive mounts to be less friendly to frequent repositioning.
What else can the holder store besides a phone?
It can also be used as a small organizer, including remote control storage and cable or plug management, depending on how you set up your charging accessories.
Specifications
| Product Title | 2 Pcs Wall Mount Phone Holder with 3M Adhesive Phone Stand with Data Cable Receiving Hole, Charger Remote Control Storage Box for Bedroom, Kitchen, Bathroom, Office (Black) |
|---|---|
| Category | Cell Phones & Accessories > Accessories > Stands |
| Brand | GrliTra |
| Manufacturer | GrliTra |
| Model Number | MA0050 |
| Color | Black |
| Item Weight | 0.09 Kilograms |
| Form Factor | Wall Mount |
| Compatible Devices | Smartphones |
| Compatible Phone Models | Universally Compatible |
| Mounting Type | Wall Mount |
| Other Special Features of the Product | Rust Resistant |
| Antenna Location | Accessories, Electronics |
| Adjustable Length | No |
| Fastening Type | Sticky Pad |
| Style Name | Minimalistic |
| Unit Count | 2.0 Count |
| Number of Items | 1 |
| Mfr Part Number | MA0050 |
| Built-In Media | 3M adhesive |
| Warranty Description | 30 days |
| Enclosure Material | Plastic |
Available variants
Color
- Black
- Grey
- White
Recommended next
TESLYAR Wood Phone Docking Station for Men (Earth Beige)
The TESLYAR wood phone docking station is a tabletop organizer that combines a smartphone stand with compartments for everyday carry items like keys, wallet, glasses, and a watch. It’s designed to look natural on a nightstand or desk, with solid wood construction and a polished finish, plus an easy assembly process. The main tradeoff: you’ll need to supply your own charging adapter and cable.
COOPER ChatStand, Adjustable Cell Phone Stand for Desk, Phone Stand for Recording, iPhone Holder for Filming, Small Tripod for iPhone, Fits Samsung, Android Smartphones (Pink Rose Gold)
The COOPER ChatStand is a desktop phone tripod stand that adjusts height (about 9 to 13 inches) and rotates for portrait or landscape recording. Built around a weighted metal base and non-slip padding, it’s designed to stay stable for video calls, content creation, and hands-free viewing, with the main tradeoff being that mounting the phone can require removing it to adjust the holder.
TESLYAR Wood Phone Docking Station with Drawer - Nightstand Organizer
A solid-wood, tabletop phone docking station that doubles as a bedside or desk organizer. It adds drawer storage plus compartments for everyday essentials like keys, wallet, and small accessories, with a straightforward assembly process. The main tradeoff to consider is that you may need to supply your own charger, and the fit depends on your phone model and cable setup.
Phone Stand for Desk, Cell Phone Holder Cute Smart Cellphone review
A foldable, portable desk phone stand in a sakura pink style that fits many phones and small tablets under 8 inches. It focuses on stability (weighted base and anti-slip grips) and protection (silicone pads), but the adjustment range is more limited for some users when the phone is upright.