2 Pack Motion Sensor, 180-Degree Replacement Motion Detector, Adjustable Time & Detection Sensitiity Up to 60 Feet Range, 3 Working Modes PIR Motion Sensor for Security Floodlight, White, UL Listed
Quick take
This PIR motion sensor kit is built to replace motion-detection components in compatible security floodlights or wall-mounted fixtures, with three operating modes and adjustable detection time and sensitivity. It’s a strong option for buyers who want dependable movement-triggered lighting without replacing an entire light fixture. The main buying caveat is compatibility: you need the right wiring and load type (incandescent or compatible LED driver/bulbs) for the sensor to work as intended.
Pros and cons
Pros
- Three modes for different setups (auto at night, day/night behavior, and manual override).
- Adjustable timer (10 seconds to 10 minutes) plus sensitivity control, with up to 60 feet detection range and 180° coverage.
- Rotable/aimable sensor head for directing detection where you need it.
- Designed for replacement use, with wire nuts included for easier installation.
Cons
- Best for replacement jobs, not standalone motion lights, so fixture compatibility matters.
- Load limits apply (up to 500W incandescent or 200W LED driver), so not all bulb types will be a fit.
- Battery is not included (it is corded electric), so it must be installed into an existing power setup.
What buyers think
Buyer-review evidence points to a consistent theme: these sensors are generally easy to install and do their job once set up, restoring motion-triggered lighting for porches and garages. Users also describe the adjustable settings as genuinely useful, especially for tuning how far the sensor will detect movement and confirming the light turns off after the selected duration. Feedback volume is moderate, so patterns around long-term reliability are still somewhat limited, but the setup experience and “works as a replacement” storyline comes through more than once.
How the 3 modes change day-to-day use
The biggest practical reason to choose this sensor is flexible control over when the light turns on and what the sensor does during daylight. Instead of a one-size-fits-all motion detector, you get three working modes that match common real-world needs.
- Auto mode: Movement in darkness turns the light on, then it turns off after your timer setting (10 seconds to 10 minutes).
- D2D mode: Designed to detect at night and remain off during the day.
- Manual override mode: Lets you keep the light on for an extended period (up to 8 hours), then it will automatically turn off at dawn.
If your goal is security-style illumination without daytime activation, D2D and Auto mode are typically the most intuitive starting points. If you want the light to stay on for a work session, Manual override mode is the one to use.
Adjustable time and sensitivity, with a 60-foot target range
For buyers shopping motion detectors, range and “how long the light stays on” are usually the two settings that make or break satisfaction. This sensor includes a timer dial from 10 seconds up to 10 minutes and stepless adjustment for detection sensitivity. The motion coverage is rated up to 60 feet with a 180° detection angle, which gives you room to aim the detection toward a driveway, walkway, or porch approach.
A helpful setup approach is to start with a moderate sensitivity and a shorter timer, then adjust upward only if you find the sensor is missing motion or turning off too quickly.
Rotable sensor head for aiming the detection zone
Because motion sensors can be “right” on paper but mis-aimed in practice, the adjustable head is a practical feature. This sensor includes a rotatable design with a pivot arm for 180° vertical adjustment and 300° horizontal aiming. That flexibility matters most if your existing fixture location has an odd viewing angle, like mounting under an eave or directing coverage across steps.
Replacement design: what it means for compatibility
This is a replacement-style motion detector meant to update existing light fixtures rather than install a whole new light unit. That can be a value win, but it also means you must confirm electrical compatibility before buying.
- Mounting: Wall mount for typical porch, garage, driveway, and walkway applications.
- Load rating limits: up to 500W incandescent or up to 200W LED driver/LED bulbs.
- Power type: corded electric (battery not included).
If your current setup uses LED drivers/bulbs, double-check that the sensor’s load guidance matches your fixture. When in doubt, buyers tend to get better results by verifying the existing light’s electrical setup before completing the swap.
Installation and setup experience
Multiple buyers describe the installation process as straightforward, noting that it works well as a direct replacement and that the sensor settings are adjustable after installation. Wire nuts are included, which helps reduce friction for common replacement wiring tasks.
Even with easy installation, the time you spend aiming the sensor head is usually worth it. Proper aiming is what turns a rated detection range into real-world performance for your specific approach paths (walkway steps, driveway vehicles, porch entryway).
Pros and cons recap
- Best for: people replacing a motion sensor on an existing compatible security floodlight, especially for porch, garage, driveway, and walkway lighting.
- Who it suits: buyers who want adjustable timer and sensitivity, and those who need flexibility via Auto, D2D, and manual override behavior.
- Who should be cautious: shoppers who need a fully standalone motion light (this is replacement-oriented), or anyone whose fixture uses LED drivers/bulbs that may not match the stated load limits.
Alternatives to consider (by feature priority)
If this sensor doesn’t match your exact needs, consider alternatives based on what matters most:
- If you want a standalone motion light: look for complete outdoor motion floodlights or porch lights with integrated PIR sensing, so you avoid replacement wiring and load matching concerns.
- If you need longer detection coverage or different aiming constraints: compare sensors by detection angle, range rating, and adjustability of the sensor head.
- If LED compatibility is your top priority: prioritize motion detectors that explicitly support a wide range of LED driver/bulb combinations and include clear load guidance.
Verdict
The sensor is a practical pick for homeowners who want to revive an existing porch or security floodlight with reliable motion-triggered lighting and meaningful setup controls. With three modes, adjustable timer and sensitivity, and a highly aimable sensor head, it is well-suited to real-world “dial it in” installs. Just make sure the replacement fits your wiring and load type, especially if you are using LED bulbs or LED drivers.
FAQ
Does this motion sensor work with LED bulbs?
It is rated for up to 200W LED driver/LED bulbs (and up to 500W incandescent). Compatibility depends on your fixture and the LED driver/bulb load within those limits.
What are the 3 operating modes?
Auto mode turns the light on when movement is detected in darkness, then off after your timer setting. D2D mode turns on at night and stays off during daytime. Manual override mode keeps the light on for up to 8 hours, then it auto turns off at dawn.
How far can it detect motion?
The detection range is rated up to 60 feet, with a 180-degree detection angle. Real-world results depend on mounting height, aiming, and how you set sensitivity.
Is the sensor battery-powered?
No. It uses corded electric power, so there is no battery included.
Is it easy to install?
Buyers report it works well as a replacement motion sensor and describe installation and setup as straightforward, with wire nuts included and adjustable sensitivity and duration controls.
Specifications
| Product Title | 2 Pack Motion Sensor, 180-Degree Replacement Motion Detector, Adjustable Time & Detection Sensitiity Up to 60 Feet Range, 3 Working Modes Pir Motion Sensor for Security Floodlight, White, UL Listed |
|---|---|
| Category | Electronics > Security & Surveillance > Motion Detectors |
| Brand | treewell |
| Manufacturer | treewell |
| Model Number | TMD182B |
| Color | White |
| Power Source | Corded Electric |
| Maximum Range | 60 Feet |
| Mounting Type | Wall Mount |
| Battery Description | Battery not included |
| Compatible Devices | Fluorescent, Incandescent, LED |
| Frequency | 60 Hz |
| Mfr Part Number | TMD182B |
| Built-In Media | 2 pack motion sensor |
| Unit Count | 2.0 Count |
Available variants
Color
- White
- Black
- Brown
Recommended next
eMACROS Non-APP Wireless Driveway Alarm — 1/2 Mile Solar Motion Sensor with Plug-in Receiver
The eMACROS Non-APP Wireless Driveway Alarm is a solar-powered, wireless motion sensor and plug-in receiver setup designed to alert you from far down a driveway (up to about 1/2 mile, 2640 ft). It’s a strong fit for rural or large properties where you want early warning, but you should expect motion-based alerts to pick up animals and other movement, which can mean occasional false alarms unless you tune placement and sensitivity.
OUDAER Solar Outdoor Motion Sensor Alarm (Dog Barking and Gunshot Sounds)
A solar-powered motion alarm meant to deter wildlife with a loud speaker, six red LED flashes, and an optional night-only behavior. It supports three sound-volume levels, includes pre-set barking and impact sounds plus up to 20 seconds of custom voice recording, and runs on a rechargeable lithium battery with a claimed full recharge time around 10 hours.
HTZSAFE wireless driveway alarm (1 receiver + 2 motion sensors)
An outdoor/indoor wireless driveway alarm kit with weather-resistant motion sensors, a plug-in receiver, and long-distance transmission (up to 1/2 mile in ideal conditions). It’s designed for larger properties where Wi-Fi or cellular coverage is limited, with adjustable detection sensitivity and expandable coverage if you add more sensors.
TECKNET Solar Wireless Driveway Alarm with 2600FT Long Range & 36 Melodies & 5 Volumes (1 Receiver, 1 Sensor)
A solar-powered wireless driveway alarm kit built for alerts you can hear and see. It pairs a weatherproof PIR motion sensor with a receiver that offers 36 melodies, 5 volume levels, RGB LED flashing, and support for up to 4 zones, but battery details for long-term performance are less certain since the receiver uses AA batteries (not included).