1Zero Upgraded Carplay Dashboard Mount for Car, Dual-Axis Adjustable Carplay Holder with 360° Rotating Ball Joint
Quick take
The 1Zero dual-axis CarPlay dashboard mount is designed for portable 7–11 inch CarPlay screens, with a large adhesive base, height and angle adjustment, and a 360° rotatable ball joint for portrait-to-landscape viewing. It can work well on vehicles with tricky dash shapes, but adhesive holding power depends heavily on surface type, cleaning, and letting the mount fully cure after installation.
Pros and cons
Pros
- Supports portable CarPlay screens in the 7–11 inch range, making it a broad fit for many aftermarket units.
- Dual-axis adjustment (height and angle) helps you dial in a comfortable viewing position.
- 360° rotatable ball joint supports switching the screen orientation (portrait and landscape).
- Flexible nylon stand is intended to conform better to different dashboard contours.
- Buyers report it can stick well in hot conditions and keep an installed screen stable so far.
Cons
- Not suitable for all surfaces, it is not recommended for leather, soft, uneven, or textured dashboard materials.
- Designed to support devices up to 400g, so heavier screens may not be appropriate.
What buyers think
Buyer-review evidence is mixed but useful. Several buyers describe a good overall fit, including stable mounting and the ability to position the screen correctly. There are also reports of strong initial hold, such as sticking well in heat and working smoothly for specific vehicle dash shapes. However, at least one review highlights adhesive weakening after a few weeks of use, suggesting temperature and surface prep can strongly influence long-term adhesion. Overall, the available feedback points to “works well when installed on a compatible, properly prepped surface,” with reliability depending on those conditions.
How this mount is built to solve the problem
This is an adhesive dashboard mount for portable CarPlay screens, focused on two things: getting the screen where you want it and keeping it there. The base is larger than a typical small pad, and the stand is made from nylon intended to flex slightly so it can sit more comfortably on real-world dashboards.
Fit and compatibility, screen size and weight
The mount is intended for portable CarPlay screens in the 7–11 inch range. It also has a weight limit, it is designed to support devices up to 400g. If your screen is heavier than that or if you are unsure about the screen’s mass, that is the first detail to confirm before relying on an adhesive setup.
Adjustability that matters during real driving
The dual-axis design supports two types of adjustment, height and angle. That helps you reduce glare and keep the screen in a comfortable line of sight. On top of that, the integrated 360° rotatable ball joint is made for quick orientation changes between portrait and landscape layouts.
Adhesive base mounting, what to expect
The mount uses a strong adhesive base, and the manufacturer guidance emphasizes prep and curing time. For best results, the dashboard should be clean and dry, and the surface should be compatible, it is not intended for leather, soft, uneven, or textured materials. After placing the base, it’s important to press firmly and allow time for the adhesive to set, waiting at least 24 hours before using it.
Buyer feedback also suggests adhesive outcomes can vary with heat exposure. If your vehicle interior gets extremely hot or your dash surface is not ideal for adhesive, you should plan to take the installation prep steps seriously.
Pros and cons in plain terms
Who it’s for
- You have a portable CarPlay screen in the 7–11 inch range and want an adhesive dashboard solution.
- You need more than basic positioning, you want height and angle adjustment plus a 360° ball joint.
- Your dashboard shape makes other mounts awkward, and you’re looking for a stand that can flex to match contours.
Who should consider a different approach
- You’re installing on a dashboard material that is soft, textured, or leather-like, since the adhesive is not recommended for those surfaces.
- You want guaranteed long-term hold regardless of heat conditions.
- Your screen is heavier than the stated 400g limit.
Alternatives to consider (by buying priority)
- If adhesion reliability is your top concern, look for mounts that use non-adhesive attachment methods (vent clamps, CD slot mounts, or existing bracket ecosystems) so you avoid surface-dependent bonding.
- If you need a wider adjustment range or sturdier placement for heavy screens, prioritize mounts rated for your exact device weight and screen size.
- If you primarily want orientation changes, compare mounts that offer a robust, lockable rotation mechanism, so the screen position does not drift over time.
Verdict
The 1Zero dual-axis CarPlay dashboard mount is a practical choice for portable 7–11 inch screens, especially when you want height and angle adjustment plus a 360° ball joint for portrait and landscape viewing. The main tradeoff is adhesion: it can hold well when installed on a compatible, properly prepared surface, but heat and surface type can make long-term performance less predictable. If you match the mount to your screen size, weight, and dash material, it has the adjustability features many drivers look for.
FAQ
Will this work with my 7 to 11 inch CarPlay screen?
It is designed for portable CarPlay screens in the 7–11 inch range, so most screens in that size bracket should be compatible. If you’re close to the top end, double-check fit with your screen dimensions.
Does it support portrait and landscape?
Yes. The mount includes a 360° rotatable ball joint intended to switch between portrait and landscape orientations.
How long should I wait after installing the adhesive base?
Allow at least 24 hours before using it, and press the base firmly onto the dashboard during installation.
What dashboard surfaces is it not recommended for?
It is not recommended for leather, soft, uneven, or textured surfaces. The dashboard should be clean and dry before applying the base.
What device weight does the mount support?
It is intended to support devices up to 400g. Heavier screens may not be appropriate for this adhesive mount.
Specifications
| Product Title | 1Zero Upgraded Carplay Dashboard Mount for Car, Dual-Axis Adjustable Carplay Holder with 360° Rotating Ball Joint, Large 3.15" × 3.15" Adhesive Base Mount for 7"–10.26" Carplay Screens |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Vehicle Audio & Video Installation |
| Brand | 1Zero |
| Manufacturer | 1Zero |
| Color | Black |
| Compatible Devices | Monitors |
| Compatible Phone Models | for 7"-11" Portable CarPlay Screens |
| Mounting Type | Dashboard |
| Additional Features | Adjustable |
| Compatible with Vehicle Type | Automobile |
| Unit Count | 1.0 Count |
| Warranty Description | 2 Year |
| Built-In Media | Portable Monitor Suction Cup Car Mount |
| Enclosure Material | Acrylonitrile Butadiene Styrene |
Recommended next
![VICSEED 2026 Ultimate Sturdy Car Phone Holder [Upgraded 95+LBS Strongest Suction]](/product-images/019ed146-d827-75bd-84e0-aec48a74b355-0-cb03f238f7ed.webp)
VICSEED 2026 Ultimate Sturdy Car Phone Holder [Upgraded 95+LBS Strongest Suction]
The VICSEED 2026 Ultimate Sturdy Car Phone Holder is a universal, long-arm car mount designed for secure one-handed mounting and 360° positioning. It uses a strong retractable suction cup for dashboard or windshield use, plus an air vent clip option, and it’s intended to handle phones in thick cases (up to about 0.6" thickness). The main caveat is that air-vent fit can vary by vehicle vent design, so dashboard/windshield suction may be the safer bet for some drivers.
Metra Electronics 95-2001 Double DIN Installation Dash Kit for Select 1994-2012 GM Vehicles
The Metra Electronics 95-2001 double DIN dash kit is an installation-focused trim and mounting solution for select 1994 to 2012 GM vehicles. Buyers report a generally straightforward fit and use of the included brackets, trim plate, and spacers, but fit can vary by exact vehicle and you may need to pay attention to small alignment details.
Scosche TA2053B Double DIN Radio Install Dash Kit Compatible with Select 2005-2008 Toyota Tacoma
The Scosche TA2053B is a vehicle-specific double DIN dash kit for select 2005 to 2008 Toyota Tacoma models. Buyers typically like the tight, gap-free look, good color match, and the ability to reuse stock Tacoma mounting hardware for a secure, properly aligned install, with the main caveats being minor trim fitment variability and a couple of parts that may feel less sturdy.
Scosche ICCR3BN Single DIN Radio Install Dash Kit Compatible with Select 2002-07 Chrysler, Dodge & Jeep Vehicles
The Scosche ICCR3BN is a vehicle-specific single DIN dash kit and harness designed to help you install an aftermarket radio in select 2002 to 2007 Chrysler, Dodge, and Jeep models. It’s built for a “factory look” and aims to reduce wiring and fitment guesswork, with the main caveat being that it is true single DIN, and some radios may require minor kit trimming to match the opening size.