12Pcs 2 x 1.5V AA Battery Holder Case Box, 2 AA Battery Holder with Wire Leads
Quick take
This 12-pack of 2-AA battery holder cases is made for DIY and replacement work where you need battery power plus wire leads. Buyers generally report the holders grip AA batteries well and include pre-tinned wire ends for easier soldering, but some projects may need longer leads than the included 14.5 cm (5.7 in).
Pros and cons
Pros
- Holds 2 AA (1.5V) batteries securely, with fewer slip-out issues reported versus some other holders.
- Wire leads are pre-tinned for easier soldering when wiring up a project.
- Includes screw holes, useful if you want to mount the holder inside an enclosure.
- 12-pack value is convenient if you are building multiple projects or want spares.
Cons
- Lead length may be too short for certain replacements (for example, older radios or layouts needing more cable reach).
- On brand-new holders, you may need to ensure each AA slides fully forward to make good positive-side contact.
- Best suited for projects that fit the given compact dimensions, not every custom enclosure.
What buyers think
Buyer-review evidence is broadly consistent on build and fit. Many comments describe the holders as solid and sturdy, with AA batteries sitting securely rather than partially popping out. The wire leads are frequently viewed as usable for straightforward soldering and wiring tasks, and multiple buyers mention the included screw holes as a practical mounting feature. A recurring practical limitation is that the wire leads can be too short for certain devices or enclosures, so measuring your internal cable path is important before ordering. There is also limited but relevant feedback that, with new holders, attention to battery insertion position may be needed to ensure reliable contact on the positive terminal.
Who this is best for
This is a strong match if you want a simple, solderable AA battery connection for small electronics projects, prototype work, or replacing an existing 2xAA battery compartment.
- DIY builders who need multiple battery holders for different enclosures or quick experimentation.
- Repair and retrofitting jobs where a 2-AA power source and wire leads are required.
- Mounting-friendly projects that can use the included screw holes to secure the holder in place.
Key specifications to sanity-check
- Battery type: 2 x 1.5V AA batteries (uses AA cells, not larger types).
- Case size: 58.5 mm x 32.4 mm x 14.6 mm (L x W x H) (about 2.303 in x 1.276 in x 0.575 in).
- Wire lead length (each): 14.5 cm / 5.7 in.
- Material: plastic ABS, black.
- Pack size: 12 holders.
Pros and cons in real project terms
When it works well
If your project can accommodate the compact body and you are wiring within a moderate internal distance, these holders can be a straightforward way to add a reliable 2-AA supply. The secure battery grip helps reduce the annoyance of cells losing contact, and the pre-tinned ends simplify assembly for anyone comfortable with soldering.
Where it may feel limiting
The most obvious constraint is the fixed lead length. If your enclosure layout requires longer reach, you may need to extend the wires or choose a longer-lead holder. Also, if your device is sensitive to contact quality, double-check that the batteries slide fully into the holder before powering up, especially with brand-new cases.
Verdict
Choose this 12-pack of 2-AA battery holder cases with wire leads if you want a practical, solder-friendly way to power small builds and you can work within the listed dimensions and 5.7-inch lead length. It is especially appealing for hobby projects where having multiple holders or spares saves time. If your replacement device requires longer wiring distance, plan to extend the leads or look for a version with longer cable length.
Price and availability
Check the latest price and current stock status on Amazon using the link below. This item is listed as in stock, and the price can fluctuate over time.
Alternatives by fit (what to compare)
If you are deciding between holder options, compare on these factors rather than just brand or star ratings:
- Lead length: match your device’s wiring distance so you do not have to splice immediately.
- Mounting method: confirm whether your build needs screw holes, a specific form factor, or a different footprint.
- Battery retention behavior: look for descriptions that address slipping or partial contact.
- Pack size: a 12-pack can be worthwhile if you expect multiple builds, but singles or smaller packs may be better if you only need one.
FAQ
Q: Does this battery holder take 1 AA or 2 AA batteries?A: It is designed for 2 x 1.5V AA batteries per holder.
Q: How long are the wire leads?A: Each lead is 14.5 cm (5.7 inches) long.
Q: Are the wire ends ready for soldering?A: The wire ends are pre-tinned, which makes soldering easier.
Q: Can these be mounted into a project enclosure?A: Yes, the holders include screw holes for mounting.
Q: Will the batteries stay in place reliably?A: Buyer feedback generally describes a secure grip that reduces slipping, though with new holders you may need to ensure batteries slide fully forward for proper positive contact.
Specifications
| Product Title | 12Pcs 2 x 1.5V AA Battery Holder Case Box, 2 AA Battery Holder with Wire Leads |
|---|---|
| Category | Electronics > Household Batteries, Chargers & Accessories > Battery Holders |
| Brand | WAYLLSHINE |
| Manufacturer | WAYLLSHINE |
| Model Name | 1 |
| Model Number | 4330215508 |
| Item Weight | 0.02 Pounds |
| UPC | 701470389076 |
| External Testing Certification | Não Aplicável |
| Battery Capacity | 1.5 Volts |
| Voltage | 1.5 Volts |
| Reusability | Rechargeable |
| Unit Count | 12.0 Count |
| Battery Weight | 7 Grams |
| Item Dimensions | 7.87 x 1.57 x 1.18 inches |
| Antenna Location | Clock |
| Recommended Uses For Product | Clock |
Available variants
Pattern
- 12 PCS 2AA
- 6PCS 4AAA
- 6 PCS 4AA
- 6 PCS 3AA
- 12 PCS 1AA
- 6 PCS 1AAA
- 12 PCS 23A
- 6 PCS 2AAA
- 6 PCS 3AAA
Recommended next
Comecase Battery Organizer Storage Case, Battery Vault Carrying Container Bag review
The Comecase battery organizer storage case is a high-capacity, EVA foam-lined holder designed to keep AA, AAA, C, D, 9V, and button-cell batteries separated and easier to find. A removable BT-168 digital tester is included to quickly check 1.5V and 9V battery power, but it is not meant to replace a charger, and the organizer can be a bit labor-intensive to set up when you first remove the foam pieces.
24 Slots CR2 CR123 CR123A Lithium Battery Organizer Case, IP67 Waterproof Hard Case for CR17345/CR16340/CR18350/CR15270(CR2)
This compact, hard-shell battery organizer is designed specifically for CR2 and CR123-family lithium cells, with 24 individual slots and a double-snap closure for safer storage. It is an IP67-rated, dustproof and waterproof option for household backups and outdoor gear, but it is only useful if your devices actually use these battery types.
3AA(LR6) to D Size Parallel Battery Convertor Adapter Holder (Pack of 4)
3AA to D battery adapters let you run D-cell devices using AA batteries, with the option to install one, two, or three AAs for more capacity. This pack includes 4 adapters, making it a practical way to keep older flashlights, lanterns, or emergency gear running when D cells are inconvenient or expensive.
GlossyEnd Set of 4 - Two C and Two D Battery Storage Box (Clear)
The GlossyEnd set includes four clear plastic battery storage boxes, designed specifically for organizing C and D batteries. Snap lids and built-in separation help keep fresh and dead rechargeable batteries apart, but the boxes are not water resistant, so they are best for indoor storage and light travel use.