10pcs CR2032 Battery Holder Coin Cell Battery Holders 1x CR2032
Quick take
This 10-pack CR2032 battery holder set is built for projects and repairs where you want a 3V coin cell to be easier to access and connect. Each holder includes wire leads plus an on/off switch, reducing the need to wire your own battery disconnect. The main tradeoff is compatibility, it only fits CR2032 coin-cell batteries and the holders are plastic.
Pros and cons
Pros
- On/off switch built into the holder, handy for testing and basic power control.
- Wired design with red/black leads (about 5.3 in / 13.5 cm) makes connection faster.
- 3V CR2032-specific fit, sized for small electronics and hobby builds.
- 10-pack is convenient when you need spares for multiple small projects.
Cons
- Only suitable for CR2032 coin cells, not other button-cell sizes.
- Plastic holders may not be ideal for high-durability, rugged mounting situations.
- Wire length is fixed, so tight layouts may require trimming or rerouting.
What buyers think
Buyer-review evidence is limited in detail, but the available feedback consistently points to two themes: these holders are used to make CR2032 batteries more accessible in DIY and repair work, and buyers like the practical inclusion of the switch for testing or power-off control. Multiple reviews mention successful fit and usability in small builds (including props, and projects where the original battery wiring was inconvenient). A few reviews also describe the holders as straightforward to connect or adapt with soldering and routing, suggesting that the wired format is a real time-saver for hobbyist workflows. Overall, buyer-review evidence supports the idea that this is a convenient, CR2032-specific component rather than a universal battery solution.
What this is, and why the switch matters
These CR2032 battery holders are designed to accept a 3V coin cell, provide two wire leads (red for positive, black for negative), and include an on/off switch directly on the holder. For many small electronics and hobby projects, the switch helps in two common situations: powering a circuit only when you need it, and confirming whether your setup is working before final assembly.
Key specs and practical fit
- Battery type: CR2032 coin cell (3V).
- Holder size: about 1.34 in x 0.94 in x 0.24 in (34 mm x 23.9 mm x 6.1 mm).
- Wiring: attached wire leads, red (+) and black (-), about 5.3 in (13.5 cm) long.
- Quantity: 10 holders per pack.
- Construction: plastic housing.
Who it’s best for
- DIY electronics and makers who want a ready-to-use CR2032 holder with wires and a built-in disconnect.
- Repair and replacement projects where the original CR2032 access is inconvenient and you want a cleaner way to route power.
- Small device builds that benefit from a compact, coin-cell powered form factor.
Who should avoid it
- If your device uses a different battery type or a different coin-cell size, you will need a compatible holder.
- If you need a rugged, heavy-duty enclosure for frequent impacts or outdoor exposure, plastic housings may not match your durability needs.
- If your layout requires a much shorter or much longer lead length without modification, you may need to trim or reroute wires.
Pros and cons summary (so you can decide fast)
Good fit when you want speed and control
The combination of wired leads and an on/off switch is the standout feature. It reduces the extra steps of wiring a separate switch and makes it simpler to test a circuit before closing up a project.
Main limitations are compatibility and mounting durability
Because these are CR2032-specific, they are not a general-purpose battery holder. Also, plastic construction works for many hobby and indoor applications, but it may not be the best choice for rugged mounting.
Verdict
If you’re building or repairing something that uses a CR2032 coin cell and you want a compact holder with pre-attached wires and a built-in on/off switch, this 10-pack is a practical way to get started and keep spares on hand. It is not the right choice if your project needs a different battery size, or if you need a sturdier, rugged housing where plastic may be a concern. For the intended use cases, buyer feedback aligns with the core value proposition, accessibility, and easier connection.
FAQ
View the most common questions
- What devices use this CR2032 battery holder? It is designed for electronics that specifically require a CR2032 coin cell (3V). This includes many small hobby circuits and replacement situations where a CR2032 needs to be made accessible.
- Does it include a built-in on/off switch? Yes, there is an on/off switch integrated on the holder so you can control power without adding a separate switch.
- How long are the wire leads? The attached leads are about 5.3 inches (13.5 cm), with red as positive (+) and black as negative (-).
- Is it easy to wire or connect to a circuit? The wired format is intended to simplify connections for small electronics and DIY projects. Depending on your circuit, you may still need to solder or route the wires to match your setup.
- How many holders are included? The package includes 10 CR2032 battery holders.
Specifications
| Product Title | 10pcs CR2032 Battery Holder Coin Cell Battery Holders 1x CR2032 Battery Holder Battery Storage Boxes Cover with On ON-Off Switch Socket Container |
|---|---|
| Category | Electronics > Household Batteries, Chargers & Accessories > Battery Holders |
| Brand | AEDIKO |
| Manufacturer | AEDIKO |
| Model Name | CR2032 |
| UPC | 701715537385 |
| Warranty Description | 3M |
| Battery Capacity | 3 Volts |
| Voltage | 3 Volts |
| Reusability | Single Use |
| Unit Count | 10.0 Count |
| Antenna Location | Camera |
| Recommended Uses For Product | Camera |
Available variants
Size
- 10pcs
- 20pcs
Recommended next
Comecase Battery Organizer Storage Case, Battery Vault Carrying Container Bag review
The Comecase battery organizer storage case is a high-capacity, EVA foam-lined holder designed to keep AA, AAA, C, D, 9V, and button-cell batteries separated and easier to find. A removable BT-168 digital tester is included to quickly check 1.5V and 9V battery power, but it is not meant to replace a charger, and the organizer can be a bit labor-intensive to set up when you first remove the foam pieces.
ENGPOW Battery Organizer, Fireproof Battery Organizer Storage Case with Tester (BT168)
The ENGPOW BT168 is a soft, zipper-closed battery storage case designed to hold 220+ mixed battery types while keeping them separated in foam cutouts. It adds a battery tester for quick “what to recycle” checks and aims to reduce risk with fire-retardant, water-resistant materials. It is best for households that want a single place for AA/AAA/C/D/9V and common button batteries, but it has a fixed slot layout, so niche battery shapes may not fit perfectly.
3AA(LR6) to D Size Parallel Battery Convertor Adapter Holder (Pack of 4)
3AA to D battery adapters let you run D-cell devices using AA batteries, with the option to install one, two, or three AAs for more capacity. This pack includes 4 adapters, making it a practical way to keep older flashlights, lanterns, or emergency gear running when D cells are inconvenient or expensive.
Milwaukee M12 Battery Holder | Milwaukee 12V Battery Holder | Milwaukee Battery Wall Mount, Black
A simple, wall-mounted way to store Milwaukee M12 (12V) batteries in one place. It’s built from injection-molded ABS, mounts into wood or drywall, and comes with screws plus drywall anchors. The main tradeoff is battery-size fit, since not all battery lengths may line up side-by-side the same way.