10 Pcs Radar Detectors Mount Suction Cups, Compatible with AutoBoxClub Mount Clear Cobra Escort and Beltronics Radar Detector Mount
Quick take
This 10-pack of radar detector mount suction cups is designed as a replacement for compatible Cobra, Escort, and Beltronics suction-based mounting brackets. Buyers generally like how well they “stick” and how they hold up during hot summer driving, but the fit is not universal, so it matters which exact detector mount you have.
Pros and cons
Pros
- 10 suction cups, useful as replacements or spares for the same mounting setup
- Designed for compatibility with Cobra, Escort, and Beltronics radar detector mounting brackets
- Soft mushroom-head plastic is made to resist compression and wear
- Buyers report strong adhesion and decent performance in hot climates
Cons
- Installation can take some effort to get the cups mounted correctly
What buyers think
Buyer-review evidence is limited but consistent on a few key points: most people describe the suction cups as a good replacement and note that they adhere well and hold on even in hot summer temperatures. Several comments also suggest the pieces fit their existing detector mount setups cleanly. Where expectations weren’t met, it was mainly about compatibility and tightness of the fit on a particular mount style, rather than suction cups failing outright.
What these suction cups are for
If your radar detector mount uses a suction-cup interface, this 10-pack is meant to give you replacement cups for common Cobra, Escort, and Beltronics mounting brackets. Instead of replacing the entire mount, you can swap the suction pieces to restore the connection between your detector bracket and the windshield or dashboard.
Compatibility matters more than anything
These suction cups are marketed for specific detector mounting systems, including a broad list of Cobra, Escort, and Beltronics models that use compatible mounting brackets. That’s helpful if you already own one of those setups, but it also means you should double-check your mount’s compatibility before buying. Some buyers have reported a loose fit on an R7 mount, which is a reminder that “radar detector suction cups” can still vary by mount geometry.
Build and installation details
Material and durability
The cups are made from soft plastic intended to resist compression and wear. If a cup becomes warped, the manufacturer suggests soaking it in warm water for about 2 minutes to help reshape it.
Installation experience
The set includes 10 suction cups and is meant for windshield and dashboard mounting.
Pros and cons of the 10-pack format
- More value for repeat needs: If you tend to move your mount between vehicles, or you want backups, the 10-pack can reduce downtime when a replacement is needed.
- Not ideal if you only need one cup: If you’re only replacing a single worn cup, a smaller quantity could be a better fit for your budget and storage needs.
Who should buy
- You have a compatible Cobra, Escort, or Beltronics suction-based radar detector mount and want replacement suction cups.
- You drive in hot weather and want mount components that can stay adhered.
- You prefer having spare replacement parts on hand, rather than waiting when suction performance declines.
Who should avoid
- You need cups for a mount style that is not clearly compatible with this suction-cup geometry, since fit may be loose on some mounts.
- You only need a single replacement cup and would rather buy a lower-quantity option.
Price and availability
This product is listed as in stock in the United States at the time of writing, with a low per-unit cost because it’s a 10-pack. For the most current price and shipping details, check the button below.
Bottom line
If you already own a compatible radar detector suction mount, this 10-pack replacement set is a practical way to restore the windshield or dashboard hold. Based on buyer feedback, the cups tend to adhere strongly and remain stable in hot conditions, but compatibility is not one-size-fits-all, so verify your mount before ordering.
FAQ
Are these suction cups compatible with all radar detector mounts?
No. They are intended for specific compatible radar detector mounting brackets.
How many suction cups come in the pack?
There are 10 suction cups in the set.
Do buyers report the cups staying on in hot weather?
Yes, buyer feedback includes comments that they stay adhered in hot summer climates.
Where can these cups be mounted?
They are designed for installation on a windshield and dashboard.
What if a suction cup becomes warped?
The guidance is to soak the warped cup in warm water for about 2 minutes to help it regain shape.
Specifications
| Product Title | 10 Pcs Radar Detectors Mount Suction Cups, Compatible with AutoBoxClub Mount Clear Cobra Escort and Beltronics Radar Detector Mount. |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Marine Electronics > Marine GPS Accessories |
| Brand | SYGGDERS |
| Manufacturer | Xinhua County Yanran Electronic Technology Co.Ltd |
| Model Name | SYGGDERS |
| Model Number | 3c57dbd0-194e-4ac8-b747-cd4c49523bc0 |
| Color | Clear |
| Compatible Devices | radar detectors |
| Compatible Phone Models | Universal |
| Mounting Type | Windshield |
| Additional Features | Water resistant |
| Water Resistance Level | Water Resistant |
| Compatible with Vehicle Type | Automobile |
| Unit Count | 10.0 Count |
| Shape | Round |
| UPC | 797417199075 |
| Warranty Description | 1 Year Manufacturer |
| Enclosure Material | Plastic |
Recommended next
Simrad 000-13698-001 GO9 9-inch XSE Suncover, Protective Marine Display Cover, White
The Simrad 000-13698-001 GO9 XSE suncover is a tailored, snap-on protective cover made to shield a 9-inch GO9 XSE display from sun exposure and day-to-day wear. It’s best for GO9 XSE owners who want an easy, low-profile way to keep the screen looking clear when the unit is parked or stored.
Minn Kota Advanced GPS Navigation Wireless Remote
The Minn Kota Advanced GPS Navigation Wireless Remote adds deck-side control for compatible Advanced GPS Navigation systems. It offers four programmable One-Boat Network buttons, a waterproof lightweight design, and runs on included AA batteries, with setup centered on Bluetooth pairing.
TUSITA 010-13129-00 Protective Cover Compatible with Garmin Striker Plus 4, Vivid 4cv
The TUSITA silicone sun cover is designed to protect specific Garmin fishfinder/chartplotter models by shielding the main screen from sun, scratches, and everyday elements. Based on buyer feedback, the standout feature is the snug, well-aligned fit, with a thicker soft cover that stays in place better than some rigid or thinner alternatives.
C-MAP Reveal - US Lakes South East, Map Card for Marine GPS chartplotters
C-MAP Reveal adds richer shading, detailed vector charts, and advanced bathymetry layers to compatible Marine GPS chartplotters using a microSD card. It’s a strong upgrade for anglers and divers who want clearer shallow-water and drop-off information, but buyers should confirm their specific unit supports the chart features they care about.